Razer Kaira pro XBOX WIRELESS AND BLUETOOTH User Guide
- June 5, 2024
- Razer
Table of Contents
RAZER KAIRA PRO-XBOX
MASTER GUIDE
Enjoy cutting-edge audio performance that embraces the future of Xbox. Enter the Razer Kaira Pro for Xbox -a wireless Xbox Series X headset that supports mobile Xbox gaming. Fitted with our best drivers and headset mic, experience stellar sound and voice chat for unrivaled console and mobile gaming.
WHAT’S INSIDE / WHAT’S NEEDED
WHAT’S INSIDE
- Razer Kaira Pro for Xbox
A. Auto-adjusting headband
B. Bluetooth / Multi-function button
C. Game / Chat balance wheel
D. EQ / Xbox Pairing button
E. Breathable memory foam ear cushions
F. Earcups Powered by Razer Chroma RGBTM’| G. Mic diaphragm
H. Microphone jack
I. Charging port
J. Power button
K. Status indicator
L. Volume wheel M. Mic mute switch
---|---
- Charging cable
- Removable Razerim HyperClear Supercardioid Mic
- Important Product Information Guide
WHAT’S NEEDED
- Xbox One TM / Xbox One TM S / Xbox One TM X / Xbox SeriesTM XIS OR
- PC (Windows® 10 64-bit or higher) with a free USB port*
- Devices with Bluetooth 5.0 connectivity
- Internet connection for app installation
*May require the Xbox Wireless Adapter for Windows 10 (not included).
SAFETY STATEMENT
IMPORTANT! Before using your Xbox console with this product, read its
instruction manual for safety, health, and other information regarding the use
of your Xbox console.
LET’S GET YOU COVERED
You’ve got a great device in your hands, complete with 2-year limited warranty coverage. Now maximize its potential and score exclusive Razer benefits by registering at razerid.razer.com
Got a question? Ask the Razer Support Team at support.razer.com
TECHNICAL SPECIFICATIONS
HEADPHONES
- Frequency response: 20 Hz — 20 kHz
- Impedance: 320 at 1 kHz
- Sensitivity (@1 kHz): 108 dB
- Drivers: 50 mm, with Neodymium magnets
- Inner ear cup diameter: Width 56mm / Length 67mm
- Oval ear cushions: Designed for full-ear coverage with heat-transfer fabric, perfect for long-wearing comfort
- Connection type: Direct to Xbox / via Xbox Wireless Adapter for Windows 10
- Wireless range: 10 m / 30 ft
- Wireless frequency: 2.4 GHz / 5 GHz
- Battery life:
o Up to 15 hours (with Chroma Lighting)
o 20 hours (without Chroma Lighting)
MICROPHONE
- Frequency response: 100 — 10,000 Hz
- Signal-to-noise ratio: > 60 dB
- Sensitivity (@1 kHz): -54 ± 3 dB
- Pick-up pattern: Unidirectional
RANGE
- Bluetooth wireless range: Up to 10m / 30ft
GETTING STARTED
CHARGING YOUR HEADSET
Connect your Razer Kaira Pro for Xbox to a powered USB port using the charging
cable. For best results, please fully charge your headset before using it for
the first time. A depleted headset will fully charge in about 4 hours.
Once fully charged, your Razer Kaira Pro for Xbox will briefly show its battery level on the status indicator.
PAIRING YOUR HEADSET
A. TO YOUR XBOX CONSOLE
- Press the Connect button on your console.
- Press and hold the power button until the status indicator is briefly lit or until you hear a tone. The Razer logos on both earcups will also start blinking green to indicate that the headset is in Xbox pairing mode.
- Wait until the Razer logos briefly become static green, indicating that the headset is now paired to the Xbox console.
**B. TO YOUR PC VIA XBOX WIRELESS ADAPTER FOR WINDOWS 10***
Make sure that your Xbox Wireless Adapter for Windows 10 is up-to-date. Some
systems have Xbox Wireless built-in which allows you to pair your headset by
using Bluetooth & other devices in Settings.
- Plug in your Xbox Wireless Adapter for Windows 10* to your PC and then press its Connect button.
- While powered off, press and hold the power button until the status indicator is briefly lit or until you hear a tone. The Razer logos on both earcups will also start blinking green to indicate that the headset is in Xbox pairing mode.
- Wait until the Razer logos briefly become static green, indicating that the headset is now paired to the wireless adapter.
C. TO YOUR MOBILE DEVICES VIA BLUETOOTH With your headset connected to your mobile device via Bluetooth connection, you’ll be able to play/pause music tracks, and even manage calls from your mobile device while gaming on your Xbox console. While powered on, press the Bluetooth / Multi-function button until the status indicator is lit or until you hear a tone to activate Bluetooth pairing mode. Follow your device’s instructions to pair it with your headset. Once the headset is paired, the status indicator will briefly change to static blue.
USING YOUR RAZER KAIRA PRO FOR XBOX
POWER BUTTON
Power ON / OFF
Power on or off your headset by holding the power button until the status
indicator is on, and holding the button again to turn it off. Two distinct
tones will help notify you that the headset is powered on or off.
Changing Earcup Lighting
When powered on, the power button can also be used to cycle between the
lighting presets on the headset. Simply press the power button to change the
current lighting effect on the earcups.
The headset’s lighting effect can also be customized
using the Razer Headset Setup For Xbox app from your Xbox console or PC
BATTERY LEVEL
When unplugged and powered on, the status indicator will briefly show the
connection and battery status. While in use, there will be a tone notification
when the headset needs to be recharged; during such time, the indicator will
continue showing the battery status until you charge the headset.
EQ / XBOX PAIRING BUTTON
Pairing Mode
When pairing the headset to a different Xbox console or wireless adapter, use
the EQ / Xbox Pairing button to activate Xbox pairing mode. Simply press and
hold the EQ / Xbox Pairing button until the Razer logos on both earcups are
blinking green or until you hear a tone, indicating that the headset can now
be paired to a different Xbox console or wireless adapter.
EQ Presets
Double press the EQ / Xbox Pairing button to switch between the equalizer
presets available on the headset.
| Preset | Description |
|---|---|
| Default | All-around balance of audio clarity and bass |
| Bass Boost | Immerse more in solid, realistic bass |
| FPS | Hear the most subtle of footsteps sneaking from behind |
| Custom* | Your own custom balance of audio clarity |
This preset will only be available when you customize a preset on the Razer Headset Setup for the Xbox app.
BLUETOOTH / MULTI-FUNCTION BUTTON
Use the Bluetooth / Multi-function button to pair and connect your headset to
mobile devices via Bluetooth connection. While powered on, press the Bluetooth
/ Multifunction button to activate or deactivate Bluetooth; or press and hold
to activate Bluetooth pairing mode. Follow your device’s instructions to pair
it with your headset. Once the headset is paired, the status indicator will
briefly change to static blue.
Other button functions are available when the headset is powered on and
connected to your device. These functions operate based on your device’s
current activity.
Some features listed here may not be applicable to certain devices.
| Single press | Activate Bluetooth |
|---|
Play/pause
Accept incoming calls or end the current call
Put-call on hold and accept an incoming call
End call and swap to on-hold call
Press and hold for 2 seconds| Launch voice command
Reject incoming call
Swap calls
Enable or disable Gaming Mode
Press and hold for 5 seconds| Activate Bluetooth pairing mode
Double press| Skip track
Triple press| Previous track
VOLUME WHEEL
Rotate the volume wheel to increase or decrease the volume.
GAME / CHAT BALANCE
Rotate the Game / Chat balance wheel to increase the in-game volume and
decrease the voice chat volume or vice versa. By default, the notch on the
wheel is set to the middle to indicate 50% chat and 50% game volume.
RAZER HYPERCLEAR SUPER CARDIOID MIC
Plug the RazerTM HyperClear Supercardioid Mic into the headphone and bend it
until it is parallel to your mouth. Make sure the mic diaphragm is in front
and the air vent is facing away from your mouth.
Slide the mic mute switch to mute or unmute the microphone.
COMFORT
It’s recommended to gently stretch the headset before placing it over your
head to minimize headband stress however, don’t stretch the headset beyond its
limits.
RAZER HEADSET SETUP FOR XBOX APP (FOR XBOX / PC)
Use the Razer Headset Setup for Xbox app to personalize your own EQ preset
which you can set as the Custom preset of your headset, personalize Chroma
lighting effects, enable mic monitoring to hear your own voice through the
headset, and even adjust other mic features for a truly immersive gaming
experience.
Download and install the Pa7er Headset Setup for Xbox app from the Microsoft
Store on your 8 gaming console or PC
SAFETY AND MAINTENANCE
SAFETY GUIDELINES
In order to achieve maximum safety while using your Razer Kaira Pro for Xbox,
we suggest that you adopt the following guidelines:
Should you have trouble operating the device properly and troubleshooting does
not work, unplug the device and contact the Razer hotline or go for
assistance.
Do not take apart the device (doing so will void your warranty) and do not
attempt to operate it under abnormal current loads.
Keep the device away from liquid, humidity, or moisture. Operate the device
only within the specific temperature range of 0°C (32°F) to 40°C (104°F).
Should the temperature exceed this range, unplug and/or switch off the device
in order to let the temperature stabilize to an optimal level.
The device isolates external ambient sounds even at low volumes, resulting in
lowered awareness of your external surroundings. Please remove the device when
engaging in any activities that require active awareness of your surroundings.
Listening to excessively loud volumes over extended periods of time can damage
your hearing. Furthermore, legislation of certain countries permits a maximum
sound level of 86db to affect your hearing for 8 hours a day. We, therefore,
recommend that you reduce the volume to a comfortable level when listening for
prolonged periods of time. Please, take good care of your hearing.
MAINTENANCE AND USE
The Razer Kaira Pro for Xbox requires minimum maintenance to keep it in
optimum condition. Once a month we recommend you clean it using a soft cloth
or cotton swab to prevent dirt buildup. Do not use soap or harsh cleaning
agents.
LEGALESE
COPYRIGHT AND INTELLECTUAL PROPERTY INFORMATION
©2020 Razer Inc. All rights reserved. Razer, the triple-headed snake logo,
Razer logo, and “For Garners. By Garners.” are trademarks or registered
trademarks of Razer Inc. and/or affiliated companies in the United States or
other countries. All other trademarks are the property of their respective
owners.
Microsoft, Xbox, Xbox “Sphere” Design, Xbox One, and Xbox Series XIS are
trademarks of the Microsoft group of companies. All other trademarks are the
property of their respective owners.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc., and any use of such marks by Razer is under license.
Razer Inc. (“Razer”) may have copyright, trademarks, trade secrets, patents,
patent applications, or other intellectual property rights (whether registered
or unregistered) concerning the product in this guide. Furnishing of this
guide does not give you a license to any such copyright, trademark, patent, or
another intellectual property right. The Razer Kaira Pro for Xbox (the
“Product”) may differ from the pictures whether on the packaging or otherwise.
Razer assumes no responsibility for such differences or for any errors that
may appear. Information contained herein is subject to change without notice.
LIMITED PRODUCT WARRANTY
For the latest and current terms of the Limited Product Warranty, please visit
razer.com/warranty.
LIMITATION OF LIABILITY
Razer shall in no event be liable for any lost profits, loss of information or
data, special, incidental, indirect, punitive or consequential or incidental
damages, arising in any way out of the distribution of, sale of, resale of,
use of, or inability to use the Product. In no event shall Razer’s liability
exceed the retail purchase price of the Product.
GENERAL
These terms shall be governed by and construed under the laws of the
jurisdiction in which the Product was purchased. If any term herein is held to
be invalid or unenforceable, then such term (in so far as it is invalid or
unenforceable) shall be given no effect and deemed to be excluded without
invalidating any of the remaining terms. Razer reserves the right to amend any
term at any time without notice.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>