Sunbuck AS60BU Stereo Digital Power Amplifier User Manual
- June 5, 2024
- Sunbuck
Table of Contents
Sunbuck AS60BU Stereo Digital Power Amplifier
Thank you for choosing this SUNBUCK AS-60BU stereo amplifier. This compact class D digital amplifier is capable of delivering a powerful 55W(PMPO 300w) max output per channel. With |4 selectable inputs, 2 mic inputs and various controls, this is a great multipurpose amplifier for both domestic and commercial use.
Features
- Compact and Powerful Amp System Bluetooth Receiver for Wireless Audio Streaming Ability
- RCA (L/R) Audio InputExtra AUX input for other sound inputs, such as Car etc.
- Built-in media player with USB and Micro SD card input and FM receiver Line/CD input. High output power of 55 W max, One side Perfect for both domestic and commercial use
- 110-230Vac,50/60Hz(IEC)
- Two Mics input and Volume,Tone, Echo adjustable for Karaoke
- Bass/Treble Volume adjustable for Music listening.
WARNING: TO prevent fire or shock hazard, do not place the device rain
obr moisture
Guard against electric shock, non-professionals,do not open ends.
Note: To avoid electric shock,do not remove the shell cover(or back
cover.) If failure to provide qualified service personnel should repair!
Note: Due to a high-pressure machine memory,non-electronic professionals
do not disassemble the case, if the internal electronic components are Non-
normal contacts may be a serious electric shock If such incidents occur, the
Company shall not be responsible.
USE of safety
Power:
This device can only use the manual type of power indicated on the
Shock:
Item must be prevented or water into the machine. If you fall into the metal
or other conductive materials, may cause the device to short-circuit
internally generated risk of electric shock.
Safety ground wire:
This product is grounded through the power cord grounding conductor,in order
to avoid electric shock, and others for your personal safety use, insert the
product, and reliable grounding.
Product layout
- Power switch
- USB Plug
- Micro SD Plug
- Display Screen
- MP3 Button
- Master Volume
- Aux input,
- Signal EXchange Knob
- Bass
- Treble
- MIC Echo
- MIC Tone
- MIC Volume
- MIC1/MIC2 Input
- CD Input
- LINE Input
- FM Antenna Input
- 12DC Power Input
- Right Speaker Output
- LEFT Speaker Output
- AC Power Fuse(3A or T3.15A)
- AC100-240V Power Input
Remote control function
| 1. | ON/OFF | Media Player Switch |
|---|---|---|
| 2. | MODE | Mode exchange, player input channel choose |
| ****
STOP
| Stop reset, press button, the playing USB flash disk /SD card will be reset
to the first song of the storage device.
4.| MUTE| Mute button. Press this button to (turn off/ on) multimedia signal
5.| VOL+| Volume+
6.| VOL-| Volume-
| ****
144/
CH-
| Short press: turn to USB/micro SD card last song/blue tooth last song/FM last station;
Long press: USB/micro SD card songs quick backwards;
bluetooth songs quick backwards; FM stations quick backwards search.
| …,
CH+
| Short press: turn to USB/micro SD card next song/blue tooth next song/FM radio next station;
Long press: USB/micro SD card songs quick forwards;
blue tooth songs quick forwards; FM stations quick forwards search.
| ****
Play/
pause
| Short press: USB flash disk /micro SD Card status pause play/resume play;
Blue tooth mode: pause play /resume play;
Long press: Bluetooth mode exit connection.
10.| REPE| Repeat mode swit ch .
11.| EQ| EQ mode switch(EQ0:NORMAL;EQl :POP;
EQ2:CLASSICAL;EQ3:ROCK;EQ4:JAZZ)
12.| 0-9| Number Key
Parallel Connection 1/Rtotal 1/R1 +1/R2 + 1/Rg…
Series Connection Rtotal = R1 + R2 + R3…
Installation
Before installation, please ensure power is switched off and mains unpluged
from the wall to avoid damage to equipment and installer.
Wire speakers to the amplifier as shown above, ensure the positive and negative terminals are wired correctly. Audio input on the back is through 3 pairs of RCA connectors, ensure left and right signals are correct for stereo output. Finally, insert the IEC plug and connect the unit to the mains. Before switching on, always ensure the master volume is set at the lowest point to avoid power surge damage to the unit or speakers. Adjust the volume accordingly to an appropriate listening level.
Impedance Matching
AS60-BU is capable of 4-82 impedance output if more than one speaker is to be
connected to the amplifier per channel. Please ensure the total impedance of
the speakers is within the range. Speakers can be wired in two different ways,
in parallel or in series. The total impedance can be worked out by the
following formulas for the two different ways of wiring:
Specifications
- Power Supply 100-240Vac, 50/60Hz (TEC)
- Output Impedance 4-82
- Output Power (82) 2x 35W rms/2x 40W max. (EIAJ Standard @ 1kHz 10% THD)
- Output Power (42) 2x 45W rms/2x 55W max. (EIAJ Standard @ 1kHz 10% THD)
- Frequency response 20Hz-20KHz
- SNR(Signal to noise Ratio) >92dB
- Input sensitivity : line 180-450mV
- Input sensitivity: mic 18mV
- Dimensions 220 x 200x 68mm
- Weight 1.1kg
Troubleshooting
No Power| Check the mains is sw itched on and the power lead is in good
condition and fully inserted into the wall socket.
---|---
Check IEC plug is fully inserted into the amplifier on the back.
Check power switch is switched on on the amplifier.
Check if the fuse is faulty . If the fuse blows too frequently, stop use of
device immediately and refer to qualified personnel for repair.
No Music output| Check the input connection lead is fully inserted on both
amplifier and source.
Check the correct input is selected.
Check the audio source is playing.
Check volume is turn up on both amplifier and audio source.
Check speaker cable is not damaged, end striped and connected properly on both
amplifier and speakers.
Check for any loose strands on the speaker cable that is touching the positive
and negative terminal, this will trigger the short circuit protection.
No Mic output| Check Mic is switched on.
Check Mic volume is turned up on the ampli fier .
Check if Mic requires phan tom power.
Check if Mic is working properly on other device.
Diminishing output| Check speaker polarity is connected corre ctly.
Check audio source volume is turned up.
Check impedance of the speaker/ s is within the range.
Disrupted output| Check output volume is not too high on both audio source and
amplifier .
Check for damage on speaker cable and connection leads.
Check amplifier, audio device, speaker and connection cables are not near any
mains power cable or large inductive appliances such as a fridge.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment. This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>