THERMAL EXPERT TE-SQ1 Portable Thermal Imaging Camera User Manual
- June 5, 2024
- THERMAL EXPERT
Table of Contents
TE-SQ1 Portable Thermal Imaging Camera
User Manual
Document
This document describes the specifications of a thermal imaging camera, Thermal expert TE-SQ1
Summary
TE-SQ1 is a portable thermal imaging camera that combines a micro-bolometer IR sensor (320×240, 12µm pixel pitch) and a visible sensor. TE-SQ1 applied with Android 8 version and 5-inch large display can take both thermal images and visible images at the same time and can share images through Wi-Fi communication. Using the Analysis tool in SQ1, users can generate and submit reports immediately, and analysis software for Windows OS will be provided as well.
Product Specification
TE-SQ1
| Specification | TE SQ |
|---|---|
| Major Specification | Detector type |
| Array format and Pitch | 320×240, 12pm |
| Thermal sensitivity(NETD) | 55mK / F*1.0, (20°C-30°C) |
| Operability(Based on death) | 99.% |
| Spectral range | 7.5 – 14pm |
| Lens Spec. | Focal Length 5.7mm, f/1.1, Manual Focus |
| Field Of View | 38°(-I) x 29°(V) – 47°(V) |
| Visible sensor | 3MP |
| Frame rate | Standard |
| Performance | Equal to or Above 15Hz |
| Display | 5′ Display |
| Temperature Measurement | Scene Range Temperature |
Minimum -40°C -40 – 100°C, 100 – 350°C
Temperature accuracy| Target object Temperature
20 – 60°C: ± 2°C 0-20°C, 60 – 350°C: -±3°C or ± 3%
Measurement Function| The point, Line, Rectangle, Maximum/Minimum
Measurement correction| Emissivity Correction
Additional Function| LED Flash| LED Flash
Laser Pointer| Laser Pointer for targeting
WiFi| 802.
Storage| Internal 32GB, Micro SD Card port Supported
Tripod Mount| Supported
Colormap| 12 colors Supported
Physical Specification| Size| 34mm x 38mm x 24.5mm
Weigh| 375g
Power| Battery Type| Built-in rechargeable Li-ion Battery, 4200mA
Battery Life| 3hours
Charging Time| 3hours
Charging Device| 5V DC Power charger, USB-C cable included
Durability| Impact Test| IEC 60068-2-29
---|---|---
Vibration Test| IEC 60068-2-6
Storage Temperature| -20 – 60°C
Operating Temperature| -10 – 50°C
IP Code| IP54
- Temperature accuracy can be further calibrated through blackbody and software processing
Product image
Items in the box
Item in the box
TE-SQ1 Product User Guide
-
Hold Power Button for 2~3 seconds to turn on the Camera
-
As soon as the camera is turned on, the device will show a lock screen as it is above.
-
Unlock the device and open the TE-SA application on the app menu
3.1 As soon as the app is opened, Image #2 will be on the display.
-
When the app runs, an IR image is on the display. When you click the screen once, the product menu appears on the left side of the screen
Cautions
Cautions for the product
6.1.1 To prevent damage to the product, do not drop or attempt to impact
the product.
6.1.2 Do not put pressure on the infrared lens as the lens may break.
6.1.3 Be careful not to damage the coating on the infrared lens
6.1.4 Do not expose the product to high-temperature environments or heat
sources such as the sun, laser, etc. – When exposed to heat sources, the
thermal sensor inside the product may get damaged or the thermal image quality
may get degraded.
6.1.5 Always operate the product in the specified operating temperature
range. Failure to use the product within the specified operating temperature
range may result in damage to the thermal sensor and electronic parts of the
product.
6.1.6 Do not expose the product to water, rain, dust, etc. as the product
is IP54 rated.
6.1.7 Do not use compressed air for cleaning.
6.1.8 To charge the product, connect only the 5V DC power to the USB
Connector. Using other types of power may cause damage to the product.
6.1.9 This product does not support Bluetooth Communication.
Warranty
TE-SQ1 is a thermal imaging camera designed for thermography, and when using it for other purposes, prior consultation with the manufacturer is required. The warranty period is 12 months and begins on the date of shipment. Product issues occurring within the warranty period will be repaired or replaced free of charge. However, damages caused by the user’s negligence, physical impact on the product, or disassembly of the product are not covered by the free repair, and in this case, a certain amount of cost can be charged to the user according to the manufacturer’s internal RMA policy even within the warranty period.
© 2021. I3SYSTEM, Inc. All Rights Reserved
Documents / Resources
|
THERMAL EXPERT TE-SQ1 Portable Thermal Imaging
Camera
[pdf] User Manual
QVGA12-TE-SQ1, QVGA12TESQ1, 2A28DQVGA12-TE-SQ1, 2A28DQVGA12TESQ1, TE-SQ1,
Portable Thermal Imaging Camera, TE-SQ1 Portable Thermal Imaging Camera
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>