Razer Hammerhead Mercury Draadloze Gaming Earbuds User Guide
- June 5, 2024
- Razer
Table of Contents
RAZER HAMMERHRAD TRUE WIRELESS
MASTER GUIDE
What’s Inside
-
Razed Hammerhead True Wireless Earbuds
-
Charging Case
-
Charging Cable
-
Silicone Earbud Sleeves
-
Wrist Strap
What’s Needed
A device with Bluetooth audio capability.
Let’s Get You Covered
You’ve got a great device in your hands complete with 2-year limited warranty coverage. Now maximize its potential and score exclusive Razer benefits by registering at razerid.razer.com.
GETTING STARTED
CHARGING YOUR RAZER HAMMERHEAD TRUE WIRELESS
For first-time use, connect the charging case to a USB port using the charging cable without removing the earbuds. For subsequent use, the charging case and the earbuds can be charged independently.
Wait until your Razer Hammerhead True Wireless is fully charged.
BATTERY INDICATOR FOR THE CHARGING CASE WHEN PLUGGED IN
| Status
---|---
Static red | Charging
Static Green | Fully Charged
BATTERY INDICATOR FOR THE CHARGING CASE WHEN UNPLUGGED
| Status
---|---
Static Green | Battery Full
Static Orange | Battery Low
Static red | Battery Critical
PAIRING TO A MOBILE DEVICE
When trying to connect your Razer product remember to keep it within 1 meter of your mobile device.
-
While inside the charging case, simply open the lid to enter pairing mode.
You will hear an audio prompt while the earbuds are in pairing mode
-
Enable Bluetooth on your mobile device and select “Razer Hammerhead True Wireless Earbuds” from the list of devices found.
iOS
Android -
Wait for the pairing to complete. You will hear an audio prompt when the earbuds have successfully paired and connected to your device.
If the earbuds fail to connect to your audio source, the earbuds will stay in search mode and then power off after 5 minutes. If this happens, simply repeat the steps again to pair.
****Once the earbuds have been paired it will automatically try to connect to that paired mobile device every time the charging case’s lid is opened, or the earbuds are powered on. Your Razer Hammerhead True Wireless Earbuds can only connect to one mobile device at a time.
GAMING MODE
On any earbud, triple tap then holds the last tap for at least 2 seconds to activate gaming mode. Once enabled, your earbuds will function at a lower latency; giving you real-time audio feedback while gaming. Repeat the same gesture to disable gaming mode.
_ ****_For best performance, it is recommended to keep your earbuds within a very close distance of the audio source.
USING THE SILICON EARBUD SLEEVES
The silicon earbud sleeves offer increased comfort, sound isolation, and security. The soft texture feels better against your ear compared to bare plastic. Device audio improves by separating it from surrounding noise. The sleeves also help to keep the earbud secure by providing grip.
To use them, simply insert the earbud into the corresponding sleeve, and make sure each air vent is properly aligned with the sleeve opening.
POWER ON/OFF
To power off the device, simply place the earbuds back inside the charging case and close the lid.
Opening the lid if they are in the charging case will power them on.
If the earbuds are left idle outside the charging case for a few minutes, you will hear an audio prompt and then the earbuds will power off.
Touch and hold the function button for each earbud for at least 2 seconds to power them on again. You will hear an audio prompt from each earbud once they are powered on.
FUNCTION BUTTON QUICK REFERENCE
The following functions are only available when the earbuds are paired to a mobile device.
ACTION | EFFECT | AUDIO PROMPT |
---|---|---|
Touch and hold for 1/2 second | Answer call | Voice |
End call | None | |
Play/pause media | None | |
Touch and hold for 2 seconds | Power on the corresponding earbud | Voice |
incoming incoming call | Voice | |
Activate virtual assistant | Tone | |
Touch and hold for 6 seconds | Activate pairing mode for the | |
corresponding earbud | Voice | |
Double-tap | Accept incoming calls or switch calls | None |
Skip to the next track when playing media | None | |
Triple tap | Return to the previous track when playing media | None |
Triple tap the hold the last tap for 2 seconds | Enable/disable Gaming | |
Mode | Voice | |
While in pairing mode, clear paired devices | Voice |
SAFETY AND MAINTENANCE
SAFETY GUIDELINES
In order to achieve maximum safety while using your Razer Hammerhead True
Wireless Earbuds we suggest that you adopt the following guidelines:
Should you have trouble operating the device properly and troubleshooting does not work, unplug the device and contact the Razer hotline or go to support.razer.com for assistance.
Do not take apart the device (doing so will void your warranty) and do not attempt to operate it under abnormal current loads.
Keep the device away from liquid, humidity, or moisture. Operate the device only within the specific temperature range of 0°C (32°F) to 40°C (104° F). Should the temperature exceed this range, unplug and/or switch off the device in order to let the temperature stabilize to an optimal level.
The device isolates external ambient sounds even at low volumes, resulting in lowered awareness of your external surroundings. Please remove the device when engaging in any activity that requires active awareness of your surroundings.
Listening to excessively loud volume over an extended period of time can damage your hearing. Furthermore, legislation of certain countries permits only a maximum sound level of 86dB for 8 hours a day. We, therefore, recommend that you reduce the volume to a comfortable level when listening for prolonged periods of time. Please, take good care of your hearing.
MAINTENANCE AND USE
The Razer Hammerhead True Wireless Earbuds require minimum maintenance to keep them in optimum condition. Once a month we recommend you unplug the device and clean it using a soft cloth or cotton swab to prevent dirt buildup. Do not use soap or harsh cleaning agents.
LEGALESE
COPYRIGHT AND INTELLECTUAL PROPERTY INFORMATION
©2019 Razer Inc. All rights reserved. Razer, the triple-headed snake logo,
Razer logo, “For Garners. By Garners.”, and “Powered by Razer Chroma” logo are
trademarks or registered trademarks of Razer Inc. and/or affiliated companies
in the United States or other countries. All other trademarks and trade names
are the property of their respective owners and other company and product
names mentioned herein may be trademarks of their respective companies.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc., and any use of such marks by Razer is under license.
Razer Inc. (“Razer”) may have copyright, trademarks, trade secrets, patents,
patent applications, or other intellectual property rights (whether registered
or unregistered) concerning the product in this guide. Furnishing of this
guide does not give you a license to any such copyright, trademark, patent, or
another intellectual property right. The Razer Hammerhead True Wireless
Earbuds (the “Product”) may differ from the pictures whether on the packaging
or otherwise. Razer assumes no responsibility for such differences or for any
errors that may appear. Information contained herein is subject to change
without notice.
LIMITED PRODUCT WARRANTY
For the latest and current terms of the Limited Product Warranty, please visit
razer.com/warranty.
LIMITATION OF LIABILITY
Razer shall in no event be liable for any lost profits, loss of information or
data, special, incidental, indirect, punitive or consequential or incidental
damages, arising in any way out of the distribution of, sale of, resale of,
use of, or inability to use the Product. In no event shall Razer’s liability
exceed the retail purchase price of the Product.
GENERAL
These terms shall be governed by and construed under the laws of the jurisdiction in which the Product was purchased. If any term herein is held to be invalid or unenforceable, then such term (in so far as it is invalid or unenforceable) shall be given no effect and deemed to be excluded without invalidating any of the remaining terms. Razer reserves the right to amend any term at any time without notice.