GARMIN Edge 1040 Bike Computer with Solar Charging User Manual

: June 5, 2024
: Garmin

Table of Contents

Introduction
Device Overview
Safety and Tracking Features
Wireless Sensors
Installing the Cadence Sensor
Device Information
Specifications
Getting More Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Edge 1040 Bike Computer with Solar Charging
User Manual

EDGE® 1040
Quick Start Manual

Introduction

WARNING

See an Important Safety and Product Information guide in the product box for product warnings and other important information.
Always consult your physician before you begin or modify any exercise program.

Device Overview

GARMIN Edge 1040 Bike Computer with Solar Charging -
fig1

| Press to enter sleep mode and wake the device. Hold to turn the device on and off and lock the touchscreen.
---|---
| Press to mark a new lap.
USB port (under weather cap)| Lift the weather cap to charge the device or connect it to a computer. Replace the weather cap to prevent damage to the USB port.
| Press to start and stop the activity timer.
| Select to open the main menu.
Glances| Swipe up or down to view the glances.
Select to open the glance or menu.
Biking profile| Swipe left or right to change the biking profile.
Select to open the biking profile.
Electrical contacts| Charge using an Edge® external battery pack accessory.

NOTE: Go to www.buy.garmin.com to purchase optional accessories.
Pairing Your Phone
To use the connected features of the Edge device, it must be paired directly through the Garmin Connect™ app, instead of from the Bluetooth® settings on your phone.

From the app store on your phone, install and open the Garmin Connect app.
Hold to turn on the device. The first time you turn on the device, you will select the device language. The next screen prompts you to pair with your phone.
Follow the instructions in the app to complete the pairing and setup process.
NOTE: Based on your Garmin Connect account and accessories, your device suggests activity profiles and data fields during setup. If you have sensors paired with your previous device, you can transfer them during setup.
NOTE: Setting up Wi‑Fi® and sleep mode usage on your device enables the device to sync with all your data such as training stats, course downloads, and software updates.
After you pair successfully, a message appears, and your device syncs automatically with your phone.

Installing the Standard Mount
For the best GPS reception, position the bike mount so the front of the device is oriented toward the sky. You can install the bike mount on the stem or the handlebars.

Select a secure location to mount the device where it does not interfere with the safe operation of your bike.
Place the rubber disk on the back 1 of the bike mount. Two rubber disks are included, and you can select the disk that best fits your bike. The rubber tabs align with the back of the bike mount so it stays in place.
Place the bike mount on the bike stem.
Attach the bike mount securely using the two bands 2.
Align the tabs on the back of the device with the bike mount notches 3.
Press down slightly and turn the device clockwise until it locks into place.

Installing the Out-Front Mount

Select a secure location to mount the Edge device where it does not interfere with the safe operation of your bike.
Use the hex key to remove screw 1 from the handlebar connector 2.
Place the rubber pad around the handlebar:
• If the handlebar diameter is 25.4 mm, use the thicker pad.
• If the handlebar diameter is 31.8 mm, use the thinner pad.
Place the handlebar connector around the rubber pad.
Replace and tighten the screw.
NOTE: Garmin® recommends tightening the screw so the mount is secure, with a maximum torque specification of 7 lbf-in. (0.8 N-m). You should check the tightness of the screw periodically.
Align the tabs on the back of the Edge device with the bike mount notches 3.
Press down slightly and turn the Edge device clockwise until it locks into place.

Going for a Ride
If you are using a wireless sensor or accessory, it can be paired and activated during the initial setup. If your device was packaged with a wireless sensor, they are already paired and can be activated during the initial setup.

Hold to turn on the device.
Go outside and wait while the device locates satellites.
The satellite bars turn green when the device is ready.
From the home screen, select or view the biking profiles.
Select a biking profile.
Press to start the activity timer.
NOTE: History is recorded only while the activity timer is running.
Swipe left or right to view additional data screens. You can swipe down from the top of the data screens to view the widgets.
If necessary, tap the screen to view status overlay data (including battery life) or return to the home screen.
Press to stop the activity timer.
TIP: Before you save this ride and Share it on your Garmin Connect account, you can change the ride type. Accurate ride type data is important for creating bike-friendly
courses.
Select Save.
Select .

Viewing Widgets
Your device is preloaded with several widgets, and more are available when you pair your device with a phone or other compatible device.

From the home screen, swipe down from the top of the screen.
The settings widget appears. A flashing icon means the device is searching for a signal. A solid icon means the signal was found or the sensor is connected. You can select
any icon to change the settings.
Swipe left or right to view more widgets.

Viewing Glances
Glances provide quick access to health data, activity information, built-in sensors, and more.

From the home screen, swipe up or down. The device scrolls through the glances (page 2).
Select a glance to view additional information.
Select to customize the glances.

Bluetooth Connected Features
The Edge device has several Bluetooth-connected features for your compatible phone using the Garmin Connect and Connect IQ™ apps. Go to www.garmin.com/apps for more information.
Activity uploads to Garmin Connect:
Automatically sends your activity to Garmin Connect as soon as you finish recording the activity.
Audio prompts: Allows the Garmin
Connect app to play status announcements on your phone during a ride.
Connect IQ downloadable features:
Allows you to download Connect IQ features from the Connect IQ app.
Course, segment, and workout downloads from Garmin Connect:
Allows you to search for activities on Garmin Connect using your phone and send them to your device.
Find my Edge: Locates your lost Edge device that is paired with your phone and currently within range.
Messages: This allows you to reply to an incoming call or text message with a preset text message. This feature is available with compatible Android™ phones.
Notifications: Displays phone notifications and messages on your device.
Safety and tracking features: (page 7)
Social media interactions: This allows you to post an update to your favorite social media website when you upload an activity to Garmin Connect.
Weather updates : Sends real-time weather conditions and alerts to your device.

Safety and Tracking Features

CAUTION
The safety and tracking features are supplemental features and should not be relied on as a primary method to obtain emergency assistance. The Garmin Connect app does not contact emergency services on your behalf.
The Edge 1040 device has safety and tracking features that must be set up with the Garmin Connect app.
NOTICE
To use these features, the Edge 1040 device must have GPS enabled and be connected to the Garmin Connect app using Bluetooth technology. You can enter emergency contacts in your Garmin Connect account.
For more information, see your owner’s manual.

Assistance: Allows you to send a message with your name, LiveTrack link, and GPS location (if available) to your emergency contacts.
Incident detection: When the Edge 1040 the device detects an incident during certain outdoor activities, the device sends an automated message, LiveTrack link, and GPS location (if available) to your emergency contacts.
LiveTrack: Allows friends and family to follow your races and training activities in real-time. You can invite followers using email or social media, allowing them to view your live data on a web page.
Live Event Sharing: This allows you to send messages to friends and family during an event, providing real-time updates.
NOTE: This feature is available only if your device is connected to a compatible Android phone.
GroupTrack: This allows you to keep track of your connections using LiveTrack directly on the screen and in real-time.

Wireless Sensors

Your device can be used with wireless ANT+® or Bluetooth sensors. For more information about compatibility and purchasing optional sensors, go to buy.garmin.com.

Putting On the Heart Rate Monitor
NOTE: If you do not have a heart rate monitor, you can skip this task. You should wear the heart rate monitor directly on your skin, just below your sternum. It should be snug enough to stay in place during your activity.

Snap the heart rate monitor module 1 onto the strap.
The Garmin logos on the module and the strap should be right-side up.
Wet electrodes 2 and the contact patches 3 on the back of the strap to create a strong connection between your chest and the transmitter.
Wrap the strap around your chest, and connect the strap 4 hook to the loop 5.
NOTE: The care tag should not fold over. The Garmin logos should be right-side up.
Bring the device within 3 m (10 ft.) of the heart rate monitor.

After you put on the heart rate monitor, it is active and sending data.

Installing the Cadence Sensor

NOTE: If you do not have this sensor, you can skip this task.
TIP: Garmin recommends you secure your bike on a stand while installing the sensor.

Select the band size that fits your crank arm 1 securely. The band you select should be the smallest one that stretches across the crank arm.
On the non-drive side, place and hold the flat side of the cadence sensor on the inside of the crank arm.
Pull the bands around the crank 2 arm and attach them to the 3 hooks on the sensor.
Rotate the crank arm to check for clearance. The sensor and bands should not contact any part of your bike or shoe.
NOTE: The LED flashes green for five seconds to indicate activity after two revolutions.
Take a 15-minute test ride and inspect the sensor and bands to ensure there is no evidence of damage.

Installing the Speed Sensor
NOTE: If you do not have this sensor, you can skip this task.
TIP: Garmin recommends you secure your bike on a stand while installing the sensor.

Place and hold the speed sensor on top of the wheel hub.
Pull strap 1 around the wheel hub and attach it to hook 2 on the sensor.
The sensor may be tilted when installed on an asymmetrical hub. This does not affect operation.
Rotate the wheel to check for clearance. The sensor should not contact other parts of your bike.
NOTE: The LED flashes green for five seconds to indicate activity after two revolutions.

Device Information

Charging the Device

NOTICE
To prevent corrosion, thoroughly dry the USB port, the weather cap, and the surrounding area before charging or connecting to a computer. The device is powered by a built-in lithium-ion battery that you can charge using a standard wall outlet or a USB port on your computer.
NOTE: The device will not charge when outside the approved temperature range (page 11).

Pull up the weather cap 1 from the USB port 2.
Plug the small end of the USB cable into the USB port on the device.
Plug the large end of the USB cable into an AC adapter or a computer USB port.
Plug the AC adapter into a standard wall outlet.
When you connect the device to a power source, the device turns on.
Charge the device completely. After you charge the device, close the weather cap.

Tips for Using the Edge 1040 Solar Device

When you are not using the device, point the display toward sunlight to extend the battery life.
Solar charging occurs even when the device is in sleep mode or turned off.

Specifications

Edge operating temperature range: From -20º to 60ºC (from -4º to 140ºF)
Edge charging temperature range: From 0º to 45ºC (from 32º to 113ºF)
Speed sensor and cadence sensor operating temperature range: From -20º to 60ºC (from -4º to 140ºF)
Heart rate monitor operating temperature range: From -5° to 50°C (from 23° to 122°F)

Product Updates
On your computer, install Garmin Express™ (www.garmin.com/express). On your phone, install the Garmin Connect app. This provides easy access to these services for Garmin devices:

Software updates
Map updates
Data uploads to Garmin Connect
Product registration

Getting More Information

Go to support.garmin.com for additional manuals, articles, and software updates.
Go to buy.garmin.com, or contact your Garmin dealer for information about optional accessories and replacement parts.

Getting the Owner’s Manual
The owner’s manual includes instructions for using device features and accessing regulatory information.
Go to www.garmin.com/manuals/edge1040.

support.garmin.com

© 2022 Garmin Ltd. or its subsidiaries Garmin®, the Garmin logo, ANT+®, and Edge® are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. Connect IQ™, Garmin Connect™, and Garmin Express™are trademarks of Garmin Ltd. or its subsidiaries.
These trademarks may not be used without the express permission of Garmin. Android™ is a trademark of Google Inc. The BLUETOOTH® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Garmin is under license. Wi‑Fi® is a registered mark of Wi-Fi Alliance Corporation. Other trademarks and trade names are those of their respective owners.

GARMIN Edge 1040 Bike Computer with Solar Charging -
icon6