KEYi TECH Click Bot Coding Robot Kits for Kids User Manual
- June 5, 2024
- KEYi TECH
Table of Contents
Click Bot Coding Robot Kits for Kids
User Manual
Install ClicBot App
You can search “ClicBot App” in App Store/ Android app store or scan the QR code below to download it.
It supports iOS 10.0, Android 5.0 and above.
https://keyirobot.cn/web/index/qrcode
Advice
For the Operation Manual and the FAQs, please refer to the ClicBot Space Travel Guide. Please refer to the User’s Manual for information of ClicBot, including module specifications, assembly, usage, connection settings, battery recharging, security & privacy, after-sale services, and FAQs.
Precautions
- Contains small parts. Not suitable for children under 3 years old;
- Contains precision parts. Prevent it from high drop;
- Not fireproof.
- Not waterproof.
- Keep the golden “pogo” pins away from metal;
- Do not directly or indirectly connect two or more Brain together;
- Do not remove or replace the built-in battery; please contact our after-sales service team for repairs in case of battery damage;
- Please use the charger recommended only (output voltage recommended: DC 5V/2A);
- Do not play with it while charging;
- Do not rotate ClicBot when the movement function is locked;
- Do not touch the moving ClicBot;
- Clicquot should be recycled to prevent environmental pollution;
- This package contains important information, please keep it properly.
Introduction
ClicBot is an intelligent robot for kids with built-in educational and entertaining functions.
ClicBot is of unique modular design that is easy to assemble and disassemble and allows the creation of varied imaginative robots as building bricks. ClicBot is more than just a robot or a toy, it is the companion of children. It has a big blinking eye, like a curious kid looking around. ClicBot is able to interact with you. If it recognizes you, it will greet you warmly. When you pet its head, it will play cute; If you block its way, it will take detours curiously. The ClicBot App also provides various functions and applications, such as galloping racing robots, cute animal robots, climbing robots, and bionic walking robots, and satisfying children’s every imagination of robots.
ClicBot is designed to help children shape the future. The ClicBot App has two creative tools: motion script or graphical programming. With a motion script, users can easily control the movement and direction of ClicBot remotely, by directly adjusting the posture of the robot in turn, or pushing the robot to move in all directions like a toy car. For more intermediate and advanced actions, users can use the drag & drop graphical programming feature to create a wider variety of amazing programs and actions. To help children fully exert their ideas and creativity, ClicBot App will continue to update the STEAM videos under its ClicBot CollegeAcademy function, so as to better guide children on how to build, and program, and play with different robotic creations. Additionally, users can also upload their works to the ClicBot App Community for sharing with others.
Specification of Modules
Brain
The Brain is the master control and power supply unit of the ClicBot. It uses
an ARM-A7 processor and includes a rechargeable polymer lithium battery with a
capacity of 1550mAh. The eye of the ClicBot is a 2.1-inch rotational,
circular touch screen. Visual sensors, gesture sensors, and camera lights are
located at the upper-left corner. There
are three touch sensors located on the upper, left, and right side of the
Brain respectively; two connectors are located on the upper and bottom rear
side. The Brain also contains such functional modules as an accelerometer,
gyroscope, microphone, loudspeaker, and Wi-Fi module.
Size | 66.766.5124.8 mm | Touch sensors | Upper, left, and right side |
---|---|---|---|
Weight | 275g | Microphone | Support volume detection |
Touch screen size | 2.1″ | Loudspeaker | Single track |
Screen rotate angle | -24° – +24° | WiFi | 2.4 G/5G |
Camera | 2-megapixel | Battery | 1550mAh |
Support face | Charge port | USB-C | |
detection & recognition, motion detection Recognition distance 5 5m | |||
Connector | Upper and bottom rear side |
Gesture recognition
sensors| 8 gestures can be recognized at a
distance of 5 20cm|
Joint
Joint is used for integrated motion.
It is a high-precision servo system, which contains a DC geared motor and
sensors such as angular rate/angle position sensors.
There are four connectors, two in each hemisphere. Each connector has a status
indicator showing the connection and update status.
Size | 55 mm (diameter) |
---|---|
Weight | 65 g |
Motor rated power | 2.64 W |
Maximum rotation
speed| 216° /s
Connection light| Two each in the upper and lower hemisphere
Joint
*Status of Joint’s indicator
Connection Status
Light connected correctly
FlashingWaiting for module connection
Flashing quickly wrong connection
Update Status
Light onUpdated
successfully
FlashingModule needs
updating
Skeleton
The Skeleton, the “bone” of the ClicBot, is used for connecting the limbs of the robot. There are two connectors, located at the top and bottom of the Skeleton. Two strip status indicators are located on the front, which show the connection and updates status.
Size | 37.837120 mm |
---|---|
Weight | 50 g |
Connector
position| Upper and
bottom rear side
*Status of Skeleton’s indicator
Connection Status
Light onConnected correctly FlashingWaiting for module connection
Flashing quickly wrong connection
Update Status
Light updated successfully
FlashingModule needs updating
The color of Skeleton’s indicator can be changed via graphical programming.
Wheel
The wheel is a functional actuator module used for vehicle setups. The Wheels include a DC geared motor and a magnetic speed sensor, with a maximum rotation speed of 4.5 rounds per second. It also has a status indicator near the main connector, showing the connection and update status.
Wheel diameter | 83.8 mm |
---|---|
Weight | 130g |
Motor rated power | 2.4W |
Maximum rotation | 4.5 rounds/second |
Connector position | 1 |
*Status of Wheel’s indicator Connection Status Light on→ Connected correctly
FlashingWaiting for module connection Flashing quickly→Wrong connection
Update Status
Light on →Updated successfully
Flashing→ Module needs updating
Mount
The Mount can be used to fix your ClicBot to a table with Mount Stickers.
Size | 75.375.345.8 mm |
---|---|
Weight | 60g |
Please use the Mount stickers provided by KEYi Tech to ensure a firm adhesion.
Locker
The Locker is used to reinforce connections between two modules.
Size | 473615.4 mm |
---|---|
Weight | 60g |
It can be used for connecting modules when additional Lockers are required.
Smart Foot
The Smart Foot is a functional sensor module that serves as the ‘feet’ of the ClicBot. The Smart Foot includes a highly sensitive pressure sensor and a microprocessor to control and measure terminal pressure.
Size | 41.841.871.2 mm |
---|---|
Weight | 50g |
Pressure detection range | 2N |
Connector position | Upper side |
Do not apply too much pressure, otherwise, the pressure detection function of Smart Foot may be damaged.
Above the Smart Foot, there is an orange indicator. After connecting to ClicBot, the luminance of the indicator will change along with the pressure. The indicator can also indicate the connection status and update status.
Connection Status
Light on→Connected correctly
FlashingWaiting for module connection
Flashing quickly→Wrong connection
Update Status
Light on→Updated successfully
Flashing→Module needs updating
Suction Cup
The Suction Cup is a functional actuator module. The Suction Cup includes a negative pressure pump and a solenoid valve. By utilizing a microprocessor, it can control the air current and on/off the vacuum, allowing the ClicBot to perform climbing functions. It also uses the air pressure sensor to proactively check the stability of the ClicBot’s movement.
Size | 838391 mm |
---|---|
Weight | 200 g |
Suction weight | Maximum weight in vertical direction 20 |
kg
Maximum weight in the horizontal direction
5 kg
Connector position| Bottom
The suction Cup has a green indicator. The indicator presents a breathing effect when Suction Cup is functioning and stays on if the suction is successful. The indicator can also indicate the connection and update status.
Connection Status
Light on→Connected correctly
FlashingWaiting for module connection
Flashing quickly→Wrong connection
Update Status
Light on→Updated successfully
Flashing→Module needs updating
Distance Sensor
The Distance Sensor is a functional sensor module, which uses a high-precision infrared probe and a built-in microprocessor to control and measure the distance from an obstacle.
Size | 404082.4 mm |
---|---|
Weight | 60 g |
Detection distance range | 2-100 cm |
Degree of freedom control | Control range of universal joint at the Bottom: 0° |
– 180° Body left-right rotation control range: -90°- 90°
Connector position| Bottom
It has a red indicator. After connecting the Distance Sensor, the luminance of the indicator will become brighter when the distance is shortening. The indicator can also indicate the connection status and update status.
Connection Status
Light on→Connected correctly
Flashing→Waiting for module connection
Flashing quickly→Wrong connection
Update Status
Light on→Updated successfully
Flashing→Module needs updating
Grasper
Grasper is a functional actuator module. It adopts a flexible bionic design and can be controlled by a built-in microprocessor for grasping objects of various shapes and sizes.
Weight | 90g |
---|---|
Size | 1658057mm |
Maximum grasping weight | 250g |
Maximum grasping size | 6cm |
Connector position | Bottom |
Grasper has a yellow indicator which can also indicate the connection status and update status.
Connection Status
Light on→Connected correctly
Flashing→Waiting for module connection
Flashing quickly→Wrong connection Update Status
Light on→Updated successfully
Flashing→Module needs updating
Assembly
All ClicBot modules are connected by connectors. Each connector has an inner buckle, an outer buckle, and golden “pogo” pins. You can connect two modules by interlacing the inner buckle and outer buckle, while the golden “pogo” pins are used for transferring instruction and supplying power.
When connecting two modules, please align the inner buckle of one module with the outer buckle of the other module
Any two modules can be connected in parallelly or otherwise.
Holder
The top of the Holder is a standard 1/4 screw, which can be used for connecting a cellphone or sports camera to ClicBot.
Size | 39.839.879.6 mm |
---|---|
Weight | sog |
Degree of freedom contro | Control range of universal Joint at the |
Bottom:0° -180°
Body left-right rotation control range: -90° -90°
Connector position| Bottom
Battery Capacity and Charging
Different colors on the Brain indicate the battery status of the ClicBot.
You can also check the power on the system menu.
When the power is low, an alert will be displayed on the screen.
Please charge the battery to ensure its normal operation and better maintain
the battery performance.
Security and Privacy
Security Information
GB19865-2005、GB6675.1-2014、GB6675.2-2014、GB6675.3-2014、GB6675.4-2014
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator & your body. FCC ID: 2AWR5-KY002B
RSS-Gen Issue 4 December 2014″&”CNR-Gen 4e Décembre 2014: –English:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not
cause interference, and (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
IC : 226344-KY002B
Manufacturer’s Name: Beijing Ke Yi Technology Co., Ltd.
Address: 8th Floor, Diamond Building, Huayuan Road, Haidian District, Beijing,
China
Product Name: ClicBot Modular Entertaining and Educational Toy Trade Mark:
ClicBot
Model number: KY002CK10
Operating Temperature: -10° C to 40° C
This device is in compliance with the essential requirements and other
relevant provisions of Directive 2014/53/EU. All essential radio test suites
have been carried out.
Detailed DOC file please visit our website: www.keyirobot.com.
The device complies with RF specifications when the device is used at 20cm
from your body.
Care for the environment! Must not be discarded with household waste.
Ke Yi Technology Co., Ltd.
RF Specification
This product can be used across EU member states.
Function | Operation Frequency | Max RF output power | Limit |
---|---|---|---|
2.4G WIFI 802.11b/g/n (HT2O,HT4O) | 802.11b/g/n(20MHz): 2412-2472MHz; | ||
802.11n(40MHz):2422 -2462MHz | 13.02 dBm | 30 dBm. |
5G WIFI 802.11a/n/ac
(20/40/80)| 802.11a/n(HT20)/ac(VHT20): 5745-5825MHz: 802.11n(HT40)/ac(VHT40):
5755-5795MHz: 802.11ac(VHT80):5775MHz| 10.57 dBm| 30 dBm.
User Privacy
We value personal information security and will make every effort to protect
your personal information. We will take all reasonable and practicable means
to avoid collecting irrelevant information. If it is necessary for us to
collect your information, we will obtain your authorization first, and store
such information on a local hard drive in
accordance with relevant standards.
Unless absolutely necessary, we will give priority to processing your personal
information on the local hard drive, so as to avoid any unauthorized access,
disclosure, improper usage, modification, damage, or loss of your information.
For specific privacy policies, please refer to the ClicBot App or
visit www.keyirobot.com.
We will provide a 12-month free maintenance service for any material and technological defects to your ClicBot or its accessories, and a 6-month free maintenance service for materials or motors from the date of purchase, provided that such defects fall within the scope of the product warranty as confirmed by test technicians of KEYi TECH.
Please contact support@keyirobot.com or visit your local retailer for after-sales services.
Please keep your receipt secure for after-sales services.
FAQs
How to turn on/off ClicBot?
To turn on ClicBot, you can press and hold the power button on the rear side
of Brain for 3 seconds. To turn off it, you can press the power button on the
rear side of Brain and then choose the turn-off icon on the screen; or press
and hold the power button for 6 seconds to trigger a force shutdown.
Why does my ClicBot shut down automatically?
To maintain the battery and motor performance, ClicBot will shut down
automatically in the following situation:
- No operation for over 20 minutes;
- Battery capacity below 10%.
How long does it take for ClicBot to be fully charged, and how long can a
completely charged ClicBot run?
It takes 3 hours to fully charge it with a 5V/2A charger. It can run
continuously for up to 4 hours. (as the case may be).
Does the ClicBot have to be connected to the network while operating?
No, but it does when checking available updates.
Does the ClicBot Robot have to be used with the ClicBot App?
Not necessary. It can be controlled manually with the Bac/Bic function on the
Brain.
What is the maximum distance of remote control with ClicBot App?
It’s up to the connection mode: When connecting via a router, it is up to 10m
which may be different due to the performance of the router.
When connecting via hotspot, it is up to 5m.
Can ClicBot’s functions be updated?
All ClicBot modules can be upgraded online.
For checking/downloading new functions, please connect the Brain to Wi-Fi,
swipe upwards to enter the system menu, and select [Upgrade].
Upon connecting other modules to Brain, a prompt for upgrading will pop up on
the screen when it finds an available update. You can follow the instructions
on the screen to upgrade modules.
How far can Brain recognize blocking or gestures like waving?
The gesture sensor is located in the upper-left triangle area of the screen of
Brain Module. Blocking or gestures can be recognized at a distance of 5-20 cm.
How far can Brain detect obstacle?
The gesture sensor is located in the upper-left triangle area of the screen of
the Brain Module. Obstacles can be detected at a distance of 5-20 cm.
How far can Brain recognize the human face?
The camera & Face Recognition module is located in the upper-left triangle
area of the screen on the Brain. Human faces can be recognized at a distance
of around 1 meter.
How far can Brain recognize motion?
The camera for motion detection is located in the upper-left triangle of the
screen on the Brain. Motion can be detected at a distance range between 1 and
5 m.
What is the purpose of the camera on the Brain?
The Brain is equipped with a 2-megapixel camera that enables the robot’s
functions such as first-person perspective control, face detection &
recognition, motion detection, etc.
What is the rotation range of the screen on the Brain?
The screen can be rotated up to 24° either to the left or right. You can set
up the rotation via drag & drop graphical programming in ClicBot App. Please
do not rotate the screen manually.
How to assemble a ClicBot Robot?
The ClicBot is designed with smart assembling guidance. After choosing the
robot is to be assembled, there will be a step-by-step instruction shown on
the screen of the Brain, and the indicator light will flash as an indication.
The system will automatically check whether the modules have been assembled
correctly. An alert message will be prompted on the screen when the assembly
is wrong, while the indicator light of the wrongly-connected module will flash
quickly. The system will automatically adjust the angle of connection as long
as the two modules are correctly assembled.
Why do the indicator lights of a module flash?
The indicator lights indicate the status of a module. Statuses include:
Constant on – Operation normally
Breathing – In preparation
Flashing – Module assembly required
Flashing quickly – Wrong assembly
What programming languages does the ClicBot support?
Currently, ClicBot supports graphical programming and Python programming.
Which modules of ClicBot are programmable?
The ClicBot has over 20 programmable modules, including the screen of the
Brain, microphone, Joint, Wheel, and the color of the lights of Skeleton.
Warranty description
Dear Customers,
Thank you for choosing Clicbot. As former children too interested in
computers, all of us here at ClicBot remember dreaming of building a custom
robot we could truly call our own, but being constrained by the technology of
our time.We made ClicBot fulfill this dream, and hope you enjoy it as much as
we have. If you want to learn more
configurations for ClicBot, or share one you made, check out the ClicBot
Facebook community. We’ve seen some truly extraordinary nary custom builds
made by our users.
ClicBot is covered by a one-year hardware warranty so if anything starts acting funny, please tell us!
This product is near and dear to our hearts, and we care about your feedback. if you’ve got any thought, opinions, or questions, send us an email at eedback@global.keyirobot.com and we’ll reply to you within ONE business day.
Welcome to the world of ClicBot.
479Jessie St, San Francisco, CA 94103 USA
http://keyirobot.com/
Description of Warranty Terms
-
This warranty policy is valid for one year.
-
Within the warranty period, KEYi Tech will provide free repairs and replacements for all defective modules that cease functioning during normal usage.
-
Within the warranty period, KEYi Tech will charge for all repairs and replacements under the following circumstances:
1. Fail to provide a valid warranty card or proof of purchase.
2. Improper usage not in compliance with a user manual, or self-conducted modifications that lead to broken product.
3. Transportation, movement, or falling that leads to broken product.
4.0ther force majeures that lead to broken products. Example of force majeure: Earthquake. -
This warranty term does constitute an implicit promise. KEYi Tech is not responsible for unique, coincidental, and indirect damages, no matter contractual, civil negligence, or other stipulations.
-
If a customer’s country of residence has relevant laws regarding warranty terms, then those laws will prevail.
After-sales service email
feedback@global.keyirobot.com
Warranty Card
[KEYi Tech’s Copyl
Model/SKU___
SK number (Located on the back of the box)
Purchase dateYear__Month__date____
Customer name____
Phone number____
Customer address_____
Copy
1.Warranty program____
After sales agent__
Customer signature____
2.Warranty program____
After sales agent__
Customer signature___
References
- KEYi Tech|Loona Petbot | ClicBot | AI Robot
- KEYi Tech|Loona Petbot | ClicBot | AI Robot
- KEYi Tech|Loona Petbot | ClicBot | AI Robot