ALLOMN A0177 Car Wireless Steering Wheel Remote Control User Manual
- June 5, 2024
- ALLOMN
Table of Contents
A0177 Car Wireless Steering Wheel Remote Control
User Manual
Product Features
- Can be installed quickly & improve driving safety probability.
- There are two options: fivetyrqw keys. No matter five keys or ten keys, it can support all the common operations of the car.
- Installed without removing the original steering wheel can avoid damaging the steering wheel.
- Ultra-low-power battery is available and at least can be used for one year.
- More comfortable touch feeling space occupation. The button on the si avoids the incorrect operation which caused by hitting the steering wheel.
- Install easily, just need to connect 4 lines (positive electrode, negative electrode, direction & direction co two) before using.
- Integrated arc design matches with a variety of car steering wheels, also, it will not convenient for wearing a steering wheel cover.
- Application to most of the DVD navigation with direction control function.
Installation
- Remove DVD navigation
- Finding out multifunctional steering wheel control line, ACC line & ground line from thenes, please consult the navigation vendor for specific line function.
- Stickers on the receiver show the specific line, ACC is the ignition line, GNDund line, KEY1 & KEY2 are dwwgbichontrol lines, please connect alding to the instrument is only one direction control line in the navigation host, please connect to navigation. The yellow line is the received antenna, it doesn’t need to connect any line, please straighten the yelpogllow line as close as possible to the steering wheel and aviation when installed.
- Find the multifunctional buttoning interface (steering wheel settings) in the DVD navigation settings, then choose the specific function which you want to learn(please refer to DVD navigation instructions for specsetbific operation).
- Please first wheel settings or steering wheel learning interface in Andr DVD navigation, after that matching the five-button (volmmute, last song, next song), it will take about 10 seconds to pair. If a match success can see a from the receiver. The same operation for call up or answer the phone function.
- You can choose to study any operation according to your own requirements.
Attention
- In order to avoid being interfered with by some of the navigation and get better reception, please straighten the receive antenna as close as possible to the steering wheel.
- When pressing the button, please guarantee the time will be more than 0.5 seconds, if not, the key may not be identified.
- Plus that’s positive e negative eklectroyljdxde connect correctly, also insulating the terminals to avoid damaging other facilities.
Warning: This product needs to be installed by a professional, we will not bear any respnsequence was which caused by your own unauthorized installation.
Objects List
- One piecive Box.
- One piece of Five Button Key & two pieces of Ten Button Key.
- Two sets of screws
- One set of the power cord
- A copy of the instruction
§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
§ 15.21 Information to the user.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>