fenvi LCX-WK WiFi 6 Wireless USB Adapter Installation Guide
- June 3, 2024
- fenvi
Table of Contents
LCX-WK WiFi 6 Wireless USB Adapter
Installation Guide
Note:
This installation guide is only for WiFi reception.
Step 1 Hardware connection
Please insert the USB adapter directly into the computer’s USB port.
Note: When using the desktop PC, it is recommended to connect the rear
interface of the computer chassis so the effect is better!
(Most of desktop computer’s front USB interface is underpowered or
unavailable)
Step 2 Driver Installation
-
Click on CD Driver (F) 20220607_180533.
-
After opening the program, follow the prompts to install the driver
Step 3 The installation is complete
Please wait for the wireless adapter to be initialized.
After clicking, it will automatically display downward, and the wireless
connection icon will appear in the lower right corner of the computer. Click
the wireless connection icon”WiFi” and select an available WiFi signal.
FAQ ( Frequently Asked Questions)
If the computer has a firewall or a virus is displayed, it means that the
anti-virus software cannot recognize the driver software, please close the
anti-virus software first, and then start the installation program If it
cannot be used after installation, replace the USB interface, or use the USB
interface on the back of the host, delete all network card drivers, and
reinstall the drivers
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Statement: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>