Appolloflow fa816704 Water Heater Installation Kit Installation Guide
- June 5, 2024
- Appolloflow
Table of Contents
PUSH TO CONNECT
SUBMITTAL SHEET
**FSBTANKKIT
**
PUSH TO CONNECT
Water Heater Installation Kit
The Tectite by Apollo Water Heater Installation Kit with TankTee is the fastest, simplest, and cleanest method by which to install a water heater with an expansion tank. With thread tape applied to water heater nipples, screw the TankTee to the cold water inlet and the 18 in. Corrugated Stainless Steel to the hot water outlet. After applying thread tape to the nipple on the expansion tank, screw the expansion tank into the threaded outlet of the TankTee and insert the 12 in. Corrugated Stainless Steel connector with brass insert into the top of the Yankee. Finally, make the final connections to the existing piping system utilizing the Push-To-Connect ends of the connectors. It is fast, simple, and clean to install.
Features:
- Kit includes two connectors, TankTee, and a demount clip.
- Makes the installation of water heaters with an expansion tanks easy.
- The push-To-Connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC, or PE-RT pipe.
- Constructed of lead-free dezincification resistant (DZR) brass and corrugated stainless steel for superior reliability and strength.
- No-kink corrugated stainless steel construction guarantees maximum flow rate even in tight radius bends.
- For use with 3/4 in. copper tube-sized pipe.
- Demount clip allows for fitting removal (included).
- Corrosion-resistant for greater longevity.
- Ideal for potable water and hydronic heating applications.
- Fittings can be rotated after being installed for ease of use in tight spaces.
- 50-year connection / 5-year warranty.
Specifications & Approvals:
- IAPMO IGC 128-2008
- Maximum working pressure of 200 psi
- ASSE 1061/NSF 61
- Maximum temperature of 250°F.
Installation:
- Apply thread sealing tape to all male threads.
- Attach Tank Tee to the cold water inlet on water heater
- insert stem end of 12 in. CSST connector with a valve to Tank Tee then attaches valve end to the cold water supply.
- Attach expansion tank to Tank Tee.
- Attach 3/4 in. FIP end of 18 in. CSST connector to water heater and push to connect to the hot water supply.
- Push Installation – Cut pipe. Mark insertion depth using the depth gauge (not included). Push and twist pipe into the fitting until fitting edge meets depth line.
Tectite by Apollo Water Heater Installation Kit
| Part Number | Description | H | W | I) | Wt (Ibs) | Carton Qty | UPC |
|---|---|---|---|---|---|---|---|
| FSBTANKKIT | 3/4 in. Push To Connect x 3/4 in. FIP Water Heater Installation | ||||||
| Kit | 24.50 | 6.50 | 2. | 2. | 3 | 191988005047 |
The Mosack Group, Inc.
Mint Hill, NC 28227
1.888.229.2874
www.apolloflow.com