KARCHER WD 5 Wet and Dry Vacuum Cleaner Instruction Manual

June 3, 2024
Karcher

KARCHER LOGO

KARCHER WD 5 Wet and Dry Vacuum Cleaner

General notes

Read these original operating instruc-tions and the enclosed safety instruc- tions before using the device for the first time. Proceed accordingly. Keep both books for future reference or for future own-ers.

Intended use

Only use the device in private households. In accordance with the descriptions and the safety infor-mation in these operating instructions, the device is in- tended for use as a wet and dry vacuum cleaner. Cold ashes may only be vacuumed with suitable acces-sories. Protect the device from rain and do not store it outdoors.

Note : The manufacturer accepts no liability for possible dam-age caused by improper use or incorrect operation.

Environmental protection

The packing materials can be recycled. Please dispose of packaging in accordance with the environmental regulations. Electrical and electronic appliances contain valu-able, recyclable materials and often components such as batteries, rechargeable batteries or oil, which – if handled or disposed of incorrectly – can pose a potential threat to human health and the environ- ment. However, these components are required for the correct operation of the appliance. Appliances marked by this symbol are not allowed to be disposed of togeth-er with the household rubbish.
Notes on the content materials (REACH) Current information on content materials can be found at: www.kaercher.com/REACH

Accessories and spare parts

Only use original accessories and original spare parts. They ensure that the appliance will run fault-free and safely. Information on accessories and spare parts can be found at www.kaercher.com.

Scope of delivery

The scope of delivery for the appliance is shown on the packaging. Check the contents for completeness when unpacking. If any accessories are missing or in the event of any shipping damage, please notify your deal-er.

Warranty

The warranty conditions issued by our relevant sales company apply in all countries. We shall remedy possi-ble malfunctions on your appliance within the warranty period free of cost, provided that a material or manufac-turing defect is the cause. In a warranty case, please contact your dealer (with the purchase receipt) or the next authorised customer service site. (See overleaf for the address)

Description of the device

The illustrations show the device with the best possible equipment (WD 6 P S / KWD 6 P S). Depending on the model selected, there are differences in the equipment. The specific equipment is described on the device packaging. For the illustrations, refer to the graphics page. Illustration A

KARCHER WD 5 Wet and Dry Vacuum Cleaner 1

  1. Suction hose connection
  2.  Rotary switch (with power regulation for devices with a socket)
  3. Power socket
  4.  Blower function
  5.  Filter cleaning button
  6.  Parking position handle
  7. Carrying handle
  8. Recessed grip
  9. Storage area
  10. Filter box and unlocking button
  11. Cable hook
  12. Suction hose storage (both sides)
  13.  Rating plate with technical data (e.g. container size)
  14. Accessory storage
  15. Mains connection with mains plug
  16.  Parking position for floor nozzle
  17.  Steering roller
  18. Drain screw
  19. Filter bag
  20.  Flat pleated filter
  21. Removable handle with electrostatic protection
  22. Suction hose with connection piece
  23. Suction tubes 2 x 0.5 m
  24. Crevice nozzle
  25.  Floor nozzle
  26. Flexible tool hose
  27. Adapter for connecting power tools

Mount the steering rollers and support for the accessory holder

  1. The carrying handle also serves to lock the device head and container. To unlock, swivel the bracket all the way forward until the lock is free. Illustration B
  2. Before initial startup, remove the contents from the container and mount the steering rollers. Illustration C Illustration D
  3. Clip the support for the accessory mounting on the back of the device head. Illustration E

Note: For versions with stainless steel tubes, remove the pro-tective cover before initial startup.

Initial startup

Inserting the filter bag

  1. Fully unfold the filter bag.
  2. Attach the filter bag to the device connection and press it on firmly. Illustration F
  3. Fit and lock the device head. Illustration G

Installing the hose, pipes, floor nozzle

  1. Connect the suction hose. Illustration H
  2. Connect the suction hose to the handle. Illustration I
  3. Connect the floor nozzle to the suction pipes.
    •  Use the position with the brush strips extended to vacuum dry dirt.
    • Use the position with squeegees extended to suck up damp dirt / water.

Starting up the device

  1. Plug the mains plug into the socket. Illustration K Devices without a socket
  2. Set the trigger into the desired position. Illustration L
    • Position “1 ON”: The suction / blowing function is activated.
    • Position “0 OFF”: The device is switched off.
  3. Set the trigger into the desired position. Illustration M
    • “MAX” position: The suction / blowing function is activated.
    • MAX position : When the power tool is con-nected, the suction is activated automatically.
    • Position “0 OFF”: The device is switched off.

Note: As long as the device is supplied with power, the device socket can be used as a power source.

Operation

ATTENTION
Flat pleated filter missing Device damage Always work with the flat pleated filter inserted.

Note
Pay attention to the latest part numbers when purchas-ing and installing filter bags and flat pleated filters. Information on accessories and spare parts can be found at www.kaercher.com.

KARCHER WD 5 Wet and Dry Vacuum Cleaner 2

Dry vacuuming

ATTENTION
Vacuuming cold ashes Device damage Only vacuum cold ash with an ash pre- separator.

ATTENTION
Defective or wet flat pleated filter
Device damage
Before initial startup, check the flat pleated filter for damage and replace it if necessary only vacuum with a dry flat pleated filter.

Wet vacuuming
ATTENTION:
Wet vacuuming with a filter bag
Device damage
Do not use a filter bag when vacuuming wet.

Working with power tools (only for devices with a built-in socket)

CAUTION
Unintentional starting of the power tool Injury or property damage Make sure that the power tool is ready for operation as soon as it is connected to the device socket.

Note: Depending on the model selected, an adapter or an adapter and a thin tool hose are included in the scope of delivery.

  1. Connect the suction hose. Illustration H
  2. If necessary, the adapter can be adjusted to the con-nection diameter of the power tool with a suitable tool.
  3.  Option A) Put the adapter on the handle of the suc-tion hose. Connect the suction hose to the adapter on the power tool. Option B) For more flexibility when working, connect the adapter to the thin tool hose and the handle of the suction hose and connect it to the power tool. Option C) With some power tools, the handle of the suction hose can be connected directly to the power tool. Illustration N
  4. Plug the mains plug of the power tool into the device socket. Illustration O
  5. Set the trigger to MAX Set. The power can be regulated using the rotary switch.

Note: Note the maximum connected load (see information on the device socket).
Note: As soon as the power tool is switched on, the suction turbine starts up with a 0.5 second delay. If the power tool is switched off, the suction turbine continues to run for approx. 5 seconds in order to suck in the residual dirt in the suction hose.

Integrated filter cleaning system

Note: The filter cleaning system is designed for vacuuming large quantities of fine dust without a filter bag inserted. The filter cleaning system allows the soiled flat pleated filter to be cleaned at the push of a button and the suc-tion performance to be increased again.

  • Place the handle of the suction hose in the designat- ed parking position on the device head. Press the fil-ter cleaning button three times with the device switched on, waiting 4 seconds between the individ-ual actuations. Illustration P

Note: After pressing the filter cleaning button several times, check the container for its filling volume. Otherwise dirt can escape when the container is opened

Blower function

The blower function can be used to clean areas that are difficult to reach or where vacuuming is not possible, e.g. leaves in a gravel bed.

  • Insert the suction hose into the blower connection. The blower function is now activated. Illustration Q

Interrupting operation

  1. Set the trigger to “0 OFF”. The device is switched off.
  2. Variant 1: Place the handle of the suction hose in the intermediate parking position.
    Variant 2: Attach the floor nozzle in the parking po-sition. Illustration R

Ending operation

  1. Set the trigger to “0 OFF”. The device is switched off.
  2. Pull out the mains plug.
  3.  Remove the device head. Illustration B
  4. Empty the container. On the devices that have a drain screw, the contain-er can be emptied via the drain screw. Illustration S
  5. Storage possibility: Illustration Y
  6. Store the device in a dry and frost-proof room.

Care and service

  • Clean the device and plastic accessory parts with a commonly available plastic cleaner.
  • Rinse the container and accessories with water, as necessary, and dry them before further use.

Clean the filter box / flat pleated filter

  1. Unlock the filter box and fold it out. Illustration T
  2. Remove the filter box. Illustration U
  3.  Empty the filter box into a waste container. In the case of heavy soiling, tap the filter box against the edge of the waste container. The flat pleated filter does not have to be removed from the filter box. Illustration V
  4. To do this, remove the flat pleated filter from the filter box. Illustration W
  5. Clean the flat pleated filter under running water. Do not rub or brush off. Allow the flat pleated filter to dry completely before reusing. Illustration X

We recommend cleaning the flat pleated filter after each use.

KARCHER WD 5 Wet and Dry Vacuum Cleaner 3

Troubleshooting guide

Malfunctions often have simple causes that you can remedy yourself using the following overview. When in doubt, or in the case of malfunctions not mentioned here, please contact your authorised Customer Service. Declining suction performance Accessories, the suction hose or the suction tubes are clogged.

  • Remove the clog with a suitable aid. The filter bag is full
  •  Replace the filter bag. The flat pleated filter is dirty.
  • Clean the flat pleated filter (see Chapter Clean the filter box / flat pleated filter).
  • Replace the flat pleated filter.

Technical data

Note: The technical data can be found on the type plate.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals