XARALYN Trivero 90 Manual Electric Fireplace Instruction Manual

Manual Electric Fireplace
Trivero 90

Version 23120

Quick manual

Important safeguards

Please read these instructions carefully before using the appliance, and always follow the safety and operating instructions.

Important: People (including children) who are not able to use the appliance in a safe way, due to their physical, sensorial or mental capacity or their lack of experience or knowledge, must never use the appliance except if they are supervised by a person responsible for their safety or if they previously received instructions concerning the safe use of the appliance. Close supervision is necessary to prevent children from using the appliance as a toy.

Please read these instructions carefully before using the appliance.

• Check that your mains voltage corresponds to that stated on the rating plate of the appliance.
• Do not leave the heater unattended during operation and keep children away.
• From time to time check the appliance for damages. Never use the appliance if cord or appliance Shows any signs of damage. In that case, repairs should be made by a competent qualified electrician. Should the cord be damaged, it must be replaced by a competent qualified electrician in order to avoid all danger.
• Only use the appliance for domestic purposes and in the way indicated in these instructions.
• Never immerse the appliance in water or any other liquid for any reason whatsoever. When cleaning the appliance, refer to the instructions in the paragraph “Cleaning and maintenance” because water penetration through the openings can be very dangerous for your appliance.
• Never use the appliance near hot surfaces.
• Before cleaning, replacing a bulb or when you do not use the appliance, always unplug the appliance from the power supply. Do not attempt to remove the plug from the wall socket with wet hands.
• Never use the appliance outside and always place it in a dry environment.
• Never use accessories that are not recommended by the producer. They could constitute a danger to the user and risk to damage the appliance.
• Never move the appliance by pulling the cord. Make sure the cord cannot get caught in any way. Do not wind  the cord around the appliance and do not bend it.
• No responsibility is accepted if damage results from improper use, or if these instructions are not complied with.
• Stand the appliance on a stable surface so that it cannot fall.
•  Do not place the appliance under a power socket. The power socket must not be in the hot airflow of the appliance.
• Always position the heater in such a way that inflammable materials (such as curtains) cannot be ignited. Ensure at all times that the unit is placed solidly on its base/feet. Make sure that the air inlet and outlet openings are not blocked.
• To avoid any risk of fire, do not cover the heater (e.g. with clothes).
• The heater should only be operated at a minimum distance of 1 meter from any wall (except the wall against which it is mounted), piece of furniture or other object and combustibles.
• Warning: Do not operate the heater near baths, showers, washbasins, swimming pools or any other water container. It must be impossible to reach the commands of your appliance when you are in contact with water.
• The temperature of the housing and the grids may be very high when the appliance is in use. Avoid contact with the skin.
• Do not allow the power cord to touch any hot part of the appliance.
• Never use the appliance near inflammable or explosive materials.
• Do not insert any objects through the grille or into the interior of the appliance.
• Do not use double adapters or other appliances to connect with heater.
  (*) Competent qualified electrician: after-sales department of the producer or importer or any person who is qualified, approved and competent to perform this kind of repairs in order to avoid all danger. In case of need you should return the appliance to this electrician.

Getting started

• Remove the appliance from the box.
• Remove any packaging from the product.
• Keep the packaging while the warranty is valid.
• Mount the fireplace. Then plug the power cord into a 230-volt earthed socket.

Specifications:

• Consumption 15 Watt
• Maintenance-free
• Functions with LED lights
• Adjustable flames
• Remote control
• Plug: EU grounded (supplied with UK adaptor for all deliveries to UK or Ireland)
• Warranty: 2 Years on production defects

Operation

The fireplace can be controlled with the panel on the unit or with the included remote control.

Main Switch

The Main Switch is located on the fireplace. Turn the switch to “I” to connect power and turn the switch to “O” to cut the power. There will be chiming sound when turning to “I”.

Power on/off

Push the button once (icon will be light up) to turn on power for all functions. Then touch the button once more to turn all functions off.

**Flame intensity

** Touch the button once to level up/down the flame intensity. There are total 5 levels. The display will show L1,L2, L3, L4, L5 OFF to indicate the current intensity.

**Heat settings fireplace

** This fireplace consist of a fan forced electric heater with two heat setting, (“LO” shown in display) and (“HI”shown in display). Touch the button once (the icon will light up) to activate the heater at low level. Touch the button once more to active the heater at high level. When set in high level, touch the button once to deactivate the heater.

Note: The fan will continue to run for a short time and turn off automatically after the heater is turned off.

**Glow effect

** Touch the button once to turn on/off the glow effect.

**Temperature settings / thermostat control

** Adjusts the temperature set point to your individual requirements. Once the desired set temperature is reached the heater will turn off. The heater will cycle on and off to maintain the desired set temperature.

Overheating protection

• This appliance is fitted with a overheating protection which will operate if the fireplace heater overheats (e.g. due to blocked air vents). For safety reasons, the fireplace heater will NOT automatically reset.
• To reset the appliance, disconnect the appliance from the mains supply for at least 15 minutes.
  Reconnect the supply to the mains and switch on the appliance.

Cleaning

Warning: The unit must be unplugged from the power supply prior to any maintenance or cleaning.

General cleaning instructions

• The housing may be wiped with a slightly damp, lint-free cloth. Do not use any abrasive scouring pad or steel wool.
• Do not use detergents or cleaning products.
• If necessary, dust particles accumulated in the air outlet openings may be removed with a vacuum cleaner.

Protection of the environment – directive 2002/96/EC
In order to preserve our environment and protect human health, the waste electrical and electronic equipment should be disposed of in accordance with specific rules with the implication of both suppliers and users. For this reason your appliance should not be disposed of as unsorted municipal waste. The user has the right to bring it to a municipal collection point performing waste recovery by means of reuse, recycling or use for other applications in accordance with the directions.

Assembly manual when using Xaralyn fireplace.

Vreekesweid 30 – 32
1721 PR Broek op Langedijk
The Netherlands

T +31(0)226 33 14 20
E contact@xaralyn.com 
F +31(0)226 33 14 29
W www.xaralyn.com 
Version 23120

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>