QUTEK 511221020 Steps Body Composition Scale User Manual
- June 5, 2024
- QUTEK
Table of Contents
QUTEK 511221020 Steps Body Composition Scale
Specifications
- Dimensions:12.2″x 12.2″x 1.0″ (310mmx310mmx25mm
- Weight: 3.97 lb. {1.8 kg)
- Batteries: 4x 1.5V AAA
- Measurement Range: 0.4 400Ib. (0.2 180 kg)
- Measurement Resolution: 0.2 Ib. (0.1 kg)
- Model# Q5P511
- Freq. Bend: 2402MHa-2480 MH
- Max output power: 2.63dBm [ Decleration for EU Compliance
Troubleshooting
- Measure weight correctly: place the scale flat on hard floor and reset it before measurement The weight should display 0.0 Ib. before stepping on the scale Mmmmm
- Measure body fat and other body composition parameters correctiy: Stand straight on scale, and have both feet uniformly touching the electrodes as the below figure
WARNING
- STEPS must not be used on slippery floor, and in case your body is wet.
- STEPS is not recommended for pregnant women, patients with a pacemakeror artificial lung orwear an ECG or any other device.
- In case of malfunction, check the batteries in the scale and replace if needed.
- In case the device is damaged, do not use in order to avoid any inconvenient results,
- In case you do not plan an using the product for a week or more, please remove the battery.
CAUTION
- Your body composition data measurements may not be acurate when using the scale immediately after heavy physical activities.
- This model of STEPS body scale should not be usedto diagnose or treat any medical conditions. It is best to consut with your physiclan for anyadvice on medications, diet or exercise programs
- STEPS is not intended to be used bychildren under the age of 18.
- STEPS is not waterproof, never immerse the device in water. To clean, use a damp cloth. Do not use soap or any detergents
- Use STEPS on a hard surface during use.
- Gently step on the scale to wake up andwalit at least 10o seconds before weighing yourself. it is recommended never to jump or stamp to avoid damage.
- When not in use, please remove the batteries and place your device in a dry room avoiding heat, sunlight or dampness.
Power On Scale
- Your Steps Body Composition Scale is shipped with 4 AAAbatteries
- Install the batteries inside the battery compartment and power on your scale.
- After power on, you can measure body weigaHowever, to measure other body composition parameters such as body fat percentage,you need to use your Steps Body Cormpositkn Scale together with your smart phones or tablets. You will needt to install mobile application programs on your mobile devices first. See next.
Apps Install and Measurement
The Quick Wireless Body Composition Smart Scales can connect wirelessly to
mobile phones or tablets. To do so mobile devices need to install mobile
application programs.
Easiest way to download the mobile app is to use your phone to scan the below
QR code, and then follow the instructions given.
- Step: Download the APP
- Scan QR code and download APP Feelfit
- Register
- Install battery cells
- Step: Pairing scale with mobile phone
- Enter my device/add new device/pair device
- Step on scale
- Pairing scake to APPS
- Step: Measure and check the body analysis report
- Step on again and keep to digital number stable
- Check the body report in APP
- Number flashes twice means weight test finishes.
- Number 0 rolling to stable means body fat test finishes
Steps Body Composition scale
Qutek Wellbeing introduces STEPS Body Composition Scale, designed to add a
huge insight for a real health experience right at your feet.
This scale uses bioelectrical impedance analysis (BA) technology to est imate
key body health stats indluding body fat percentage to deliver actionable
insight.With STEPS Body Composition Scale,
you can now weigh yourself and your body composition data will sync
automatically with Qutek App. STEPS gives precise results to help you set your
goal to stay on track while connecting with your body. Thank you for choosing
STEPS Body Composition Scale to be your health partnert
Guarantee
The scale has been inspected for accuracy priar to leaving the manufacturing
line,and comes with a 1 year guarantee against any defects in either
workmanship or materials.
- Apply warranty terms and conditions.
Address
Qutek Technology Limited
7175Sheton Street,Covent Garden,London,WC2H 9J0United Kingdom
FCC complian ce statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not causehamfulinterterence,
and (2) this device must accept any iterfer e nce received, including
interterence that may cause undesired operation. changes or modifications not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment This equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant to Part
15of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment gener ates, uses and can radi ate radio frequency
energy 131 and, if not installed and used in accordance with the instructions,
nmay cause hamful interterence to radio conmmunications. However, there is no
guarantee that interference will not occur in a particular in stallation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment ott and on, the
user is encouraged to try to correct the interference by one or more of the
folowing measure.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Conned the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled enviroment.