SPORTTECH CL839 sPulse Armband Heart Rate Monitor User Manual

June 5, 2024
SPORTTECH

SPORTTECH CL839 sPulse Armband Heart Rate Monitor-
logo

SPORTTECH CL839 sPulse Armband Heart Rate Monitor

SPORTTECH CL839 sPulse Armband Heart Rate Monitor-prod

Dear customer,
we are pleased you chose a device from the SPORTS TECH product range. With sports equipment from SPORTS TECH you get the highest quality and latest technology. In order to fully use the potential of your device and be able to enjoy it for many years, please read this manual carefully before starting up and beginning of training, and use the device according to the instructions. The operational safety and function of the device can only be guaranteed if the safety instructions in this user manual are observed. We shall not assume any liability for damages resulting from improper use or incorrect operation.

Note

Please ensure that all persons using the device have read and understood the user manual. Keep the user manual in a safe place to be able to access it at any time if needed.

**WEARING

SPORTTECH CL839 sPulse Armband Heart Rate Monitor-
fig1**

Wear the device on the upper forearm or on the upper arm, as shown in the figure. The sensor should be on the inside of the arm. Wear the device tight enough to keep it in position, but NOT so tight that it would affect arm circulation. After use, remove sweat with wetted cloth, but no solvents.

CONNECTION

Bluetooth 5.0, ANT+ and 5.3 kHz transmission can be used simultaneously at the armband. If you need to connect mobile phone and sports watch, please make sure that the device you connect supports Bluetooth, ANT+ or 5.3 kHz transmission.

COMPATIBLE APPs

Wahoo, Zwift, Runtastic Pro, Nike Run Club, Polar Beat, X-fitness, and many more.

SET UP WITH FITNESS APP

Turn on the Bluetooth function of the mobile device, select the compatible app. The detailed connection method is subject to the corresponding app setting instructions. Initial set up with smart Bluetooth devices (Sports watches, fitness equipment & Gym team training system): The detailed connection method is subject to the corresponding equipment setting instructions.

HEART RATE DATA

The LED colour depends on the current percentage of the maximum heart rate (MHR).

COLOUR Blue Aqua Green
% of MHR <50% 50 – 57% 58 – 65%
BPM @ MHR220 <110 110 – 126 127 – 144
Yellow Orange Red Purple
--- --- --- ---
66 – 73% 78 – 81% 82 – 89%   90%
145 – 161 162 – 179 180 – 196   197

TECHNICAL DATA

  • Dimension: L51.0xW29.0xH12.0 mm
  • Weight: 15g
  • Battery Type: Rechargeable Lithium battery
  • Battery operating capacity between recharges: 20 hours for continuous heart rate monitoring
  • Working temperature: -10°C to 50°C / 14°F to 122°F
  • Transmission: ANT+, BLE, 5.3 kHz
  • Water resistance: IP67
  • ANT+ and Bluetooth frequency band: 2402-2480MHz;
  • Maximum power transmitted: +4dBm;
  • Frequency band: 5.3-5.6kHz;
  • Maximum power transmitted: 2mW.

DISCLAIMER

  • The information contained in this manual is just for reference. The product described above may be subject to alteration owing to the manufacturer‘s continuing research and development plans, without making an announcement in advance.
  • We shall not bear any legal responsibility for any direct or indirect, accidental or special damages, losses and expenses arising from or in connection with the disrespecting of this manual or improper use of the described product.

CONFORMITY

Sportstech Brands Holding GmbH hereby declares that the radio system type sPulse is compliant with EU Directive 2014/53 / EU. The full text of the EU declaration of conformity is available at the following internet address: https://service.innovamaxx.de/spulse_conformity

GENERAL INFORMATION

Thank you for choosing our heart rate armband. This product transmits the real-time heart rate data through Bluetooth, ANT+ or 5.3 kHz radio frequency to heart rate receiving device, sports and health App, helping you to manage your exercise intensity scientifically.
NOTE
You MUST charge the device prior to the first use.

SAFETY ADVICE

  • Never overexert yourself or others during training! Stop exercising if there are signs of over-exertion.
  • Consult a doctor before exercising and in case of problems to determine suitable heart rate ranges.
  • Wearers of pacemakers and similar appliances may only wear the device with a doctor’s permission.
  • Children and people with limitations may only use the device with appropriate assistance.
  • The device may contain components that cause allergic reactions when they come into contact with the skin. Remove the device at the first signs (e.g. reddening).
  • This is not a medical device. It is intended for training and recreational use only.

KEY FEATURES

  • Heart Rate, Steps Count, Calories Burned
  • Bluetooth 5.0, ANT+, 5.3 kHz
  • Rechargeable lithium battery
  • Stores 2 days heart rate data and 7 days fitness data
  • Vibration Reminder for charging
  • LED Indication of 7 heart rate zones

PRODUCT ACCESSORIES

  1. Heart rate monitor
  2. USB docking charger
  3. User Manual

CHARGING

Plug in the USB charging cable and connect the charger to charge the device.

  • Low battery (20%): Vibration notification
  • Charging: Red and Green LED flashes alternately
  • Full battery: Green LED stays on

SWITCHING ON AND OFF

Switching on:
Press the Power Button. The armband is ready for pulse measuring. Additionally, it automatically searches for a compatible Bluetooth device. It slowly flashes when there is no Bluetooth connection. It shows a steady light when it is properly connected.
Switching off:
Press and hold the power button for 2 seconds. The red LED flashes fast and then turns off. The device is powered off.

DISPOSAL

Dear customers,
As an end-user, you are legally obliged to collect waste electrical and electronic equipment and batteries as well as accumulators separately from municipal waste. We want to make this as easy as possible for you. Please note the information on this page and on the back. Notes on EU directive 2012/19/EU (in Germany implemented in ElektroG (Law about electric and electronic devices); elsewhere implementation may differ) We advise owners of electric and electronic equipment that waste electrical and electronic equipment must be collected separately from municipal waste in accordance with the applicable legal regulations. The symbol of a crossed-out garbage can, which is shown on waste electrical and electronic equipment, also indicates the obligation to collect this waste separately. Notes on disposal and symbols for an electrical appliance based on EU Directive 2006/66/EU (in Germany in accordance with the Battery Act (BattG); elsewhere, an implementation may differ)  Old batteries and accumulators must not be disposed of with household waste. As an end user, you are legally obliged to return used batteries. The symbol with the crossed- out garbage can means that you are not allowed to dispose of old batteries in the household waste. Use the offi cial collection points for this, such as the collection points of public waste disposal carriers. You can also return used batteries to retail outlets, provided they sell batteries. If the symbol Cd, Hg, or Pb is displayed under the symbol of the crossed-out garbage can, this is an indication that the battery contains either cadmium, mercury or lead. These are toxic heavy metals that not only pose signifi cant risks to the environment but also to human health.

Recycling loop

Packaging material can be conveyed back to the raw material cycle. Dispose of packaging material in accordance with legal provisions. Information can be retrieved from the return or collections systems of your community.

Information on included batteries according to Section 4 Paragraph 4 of the Electrical and Electronic Equipment Act

Battery type: Li-ion battery
Chemical system: LiCoO2 lithium cobalt oxide
Battery manufacturer: Huizhou Everpower Technology Co.,Ltd.

Disposal information:

  • Dispose of the entire device according to the applicable guidelines. There is no need to remove the battery separately.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,and (2) This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/tv technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Verkauf durch / Distributed by / Distribuido por / Distribué / Distribuito da / Verkoop via
Sportstech Brands Holding GmbH
Potsdamer Platz 11
10785 Berlin +49 30 220 663 520 www.sportstech.de

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals