Appareo Systems GALEO Tracking Tag with BLE and Cellular Communication User Guide
- June 5, 2024
- Appareo Systems
Table of Contents
Systems GALEO Tracking Tag with BLE and Cellular Communication
User Guide
Compliance
-
This device complies with part 15 of the FCC Rules. Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
-
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to protect reasonably against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help. -
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
-
This device meets the FCC requirements for RF exposure in public or uncontrolled environments for extremity exposure conditions.
-
FCC ID: 2AETC-GALEO
Getting Started
About Galeo
Galeo is a system used to track your bike. It consists of a bike-mounted
device and a smartphone app that is used to communicate with the device.
Compatible Devices
Visit FindGaleo.com for a list of compatible devices.
Powering on and Charging Galeo
Plug in the device to a wall outlet or computer USB port using the included
USB cable to wake it up from shipping mode. After that, the unit is always on
unless it is powered off in the app.
Make sure that your device is fully charged before using it. The light on the
device will blink when it’s charging, and shine steady when it’s fully
charged. 600890-000072, rev 0.2, 10/06/20
Downloading the Galeo app
To interface with Galeo, download the Galeo app from the App Store® or
Google Play Store and install it onto your phone.
Setting up Galeo
Follow the steps below to set up your Galeo for the first time.
IMPORTANT: When prompted, make sure to allow Galeo to use your location
and Bluetooth. This enables the app to communicate with the device.
- Open the Galeo app and follow the on-screen steps to create an account. Then, log in to the account.
- Tap Add a new Galeo. Plug in the device to a wall outlet or computer USB port to wake it up from shipping mode, then tap Continue.
- Tap Pair to pair the device with your phone.
- Enter a name for the device, then tap Continue.
- Edit the settings for the device, then tap Continue. For more information on these settings, see Changing Galeo Settings on page 3.
- Tap Add another if you have another Galeo, or tap Proceed to Payment if you’re done adding devices.
- Select a data plan, then tap Add Plan. Enter payment information, then tap Continue.
Mounting a Galeo
Uninstall your bike water bottle mount. Then, install the Galeo bike mount in
that location.
Locating a Galeo
When you tap on a device, you will see its location on a map.
Location Buttons
An unlock symbol indicates that the device is connected to Bluetooth.
- Tap the pointer icon to zoom out and show the location on a larger map.
- Tap Update Location to show the current location.
- Tap the arrow icon to open the location in the Maps app.
Location Accuracy
The colored circle around the device on the map indicates the area where the
device is located.
| Circle Color | Meaning |
|---|---|
| Orange | Shows location based on its precise GPS location. |
| Green | Shows location based on the cell tower that it’s pinging. If a GPS |
location fails, you will get the option to view its cell tower location. This
is a less precise location than the orange GPS location.
Red| The app failed to find the location of the device.
Changing Galeo Settings
Swipe up on the bottom of the map screen to edit settings.
Galeo Name: Edit your device name.
Alert when out of range: Receive an app notification when the device is
outside of Bluetooth range.
Alert when moved: Receive an app notification when the unit detects
movement. If your device is within Bluetooth range, this alert will be
disabled.
Buzzer Volume: Allow the device to emit a sound when you tap the Sound
Alarm button in the app.
Button Enabled: Enables the button on the unit. Disable this if you don’t
want the button to power the unit (such as if you’re packing the unit in a
suitcase).
Data Plan: View data plan information, and edit or cancel the plan.
Remove/Replace
Replace: Copy the settings and data from the existing device onto a new
one.
Remove: Erase all settings, data, and cancel the data plan on your
device.
Updating Galeo Firmware
Tap the settings icon, then tap Updating Galeo. Enable the switch to allow automatic updates when in range of the device.
Powering off and Resetting Galeo
Powering Off Galeo
Swipe up on the bottom of the map screen, then tap About Galeo. Tap Ship and
Store, then tap Yes to power off the device. To turn the device back on, hold
the button in the middle of the unit for 20 seconds.
Resetting Galeo to Factory Settings
Swipe up on the bottom of the map screen, then tap About Galeo. Tap Reset
Device to Factory Settings, then tap Yes to reset the device.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>