G21 GA-25E 350x250x250mm Digital Safe Instruction Manual
- June 5, 2024
- G21
Table of Contents
DIGITAL
SAFE
Thank you for purchasing our product.
Before using this unit, please read this manual in order to avoid improper
handling and use of the device.
You have just made an important step to protect your property. Each of our
safes is professionally produced and ensures the greatest possible security.
Before using read carefully the instructions on the following pages of this
manual.
PLEASE KEEP THE KEY IN A SAFE PLACE.
1. Safety pins
2. The reset button
3. Place for batteries
4. Handle for the lock operating
5. Cover of the emergency lock| 6. Green LED
7. Red Led
8. Yellow LED
9. Confirmation button
---|---
First use
Remove the opening cover for the emergency key next to the keyboard.
Remove the cover of the emergency lock and insert the emergency key. Then turn
the key counterclockwise.
Turn the handle clockwise.
Warning: After opening pull the safety key out and store in a safe place.
Inserting the batteries
Open the door of the safe. Insert four AA batteries into the battery holder.
If the green and the red led on the front side of the door light at the same
time it is necessary to change the batteries.
Warning: take care about the right polarity of inserted batteries. If there is
a failure of the voltage supply longer than 3 minutes the safe will be reset
and it is necessary to proceed as during the first use.
Opening the door
Enter your security number (3-8 numbers). Each press will be signalized by a
beep and by a flashing yellow light.
Pressing A (C / #) or B (E / *) will light up green light.
Turn the handle clockwise and pull out. Door will be opened.
Warning: The preset code is 159. If you enter the wrong code, yellow LED
flashes and the safe beeps three times. Please enter the code again.
Closing the door
Turn the handle counterclockwise.
Automatic locking
If you enter the wrong code three times, safe will be locked and will run the
warning beeps for 20 seconds.
3 more bad entering will lock the safe and the safe will run the beeps for 5
minutes. Warning: The keyboard is inactive during beeping. If you want to stop
beeping, you have to open the door using the emergency key and remove the
batteries.
Entering the security code
Open the safe and press the RESET button on the inner side of the safe door.
You will hear a beep and on the keyboard will flash the yellow LED.
Enter the new code (3-8 numbers). By pressing A (C / #) or B (E / *) confirm
the setting. The lock signalizes by a short beep that the new code is set. The
yellow LED goes out. If you enter the wrong code the yellow LED flashes and
you will hear 3 beeps. It is necessary to enter the code again.
Entering the main security code
Open the safe and press the key O two times, then press the RESET button on
the inner side of the door. The yellow LED lights up. Start to set up the
code.
Enter the new code (3-8 numbers). By pressing A or B confirm the setting. Safe
beeps two times and also the yellow LED blinks two times. The code is set
successfully.
When the yellow LED blinks three times, it means an invalid set of the code
and it is necessary to repeat the process again.
Opening the safe using the emergency key
In the case of forgotten code or when there is a technical problem of the
electronic lock, it is possible to open the safe by using an emergency key.
Remove the cover next to the keyboard.
Insert the key into the lock for emergency opening and turn counterclockwise.
Then turn the handle clockwise.
Mounting process
Put the safe to the place that can not be easily manipulated.
Drill the holes for the dowels.
Turn expansion screws counterclockwise.
Fix the safe on the wall with using expansion screws (or clamping screws).
Make sure the safe is correctly attached to the dowels and tighten.
Warning: use expansion screws to the concrete wall. Clamping screws use
on the wooden walls.
The English version of the manual is an exact translation of the original
manufacturer‘s instructions.
Images used in this manual are for illustrational purposes only and may differ
from the actual product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>