G21 Ranger Stainless Steel Hand Dryer Instructions
- October 30, 2023
- G21
Table of Contents
G21 Ranger Stainless Steel Hand Dryer
Product Information: Hand Dryer – Ranger Stainless Steel
This product is a hand dryer made of stainless steel material. It is suitable for use in various settings, such as public restrooms, offices, and commercial spaces. The hand dryer is designed to quickly and efficiently dry hands using high-velocity air flow, which reduces the need for paper towels and promotes eco-friendliness.
Important Safety Instructions
- Read all instructions before installing and using the hand dryer.
- If choosing to hardwire the unit, it must be installed by a qualified licensed electrician.
- Remember that any wired appliance is electrically live even when it is off.
- Failure to follow the warnings and instructions in this manual may cause serious injury or death from electrical shock.
Product Usage Instructions
- Locate a suitable location to install the hand dryer. It should be easily accessible and have proper ventilation.
- If hardwiring the unit, contact a qualified licensed electrician to install it properly.
- Turn on the power supply and activate the hand dryer by placing your hands under the nozzle. The hand dryer will automatically start blowing hot air.
- Move your hands around in the air flow to ensure that all parts of your hands are dried.
- The hand dryer will automatically turn off after a set period of time or when you remove your hands from under the nozzle.
- After use, turn off the power supply and regularly clean the hand dryer to maintain optimal performance.
By following these instructions, you can safely and effectively use the Ranger Stainless Steel Hand Dryer in your desired setting.
Thank you for purchasing our product.
Before using this unit, please read this manual in order to avoid improper
handling and use of the device.
Important safety instructions
Read all instructions before installing. When choosing to hardwire, this unit
must be installed by a qualified licensed electrician.
Any wired appliance is electrically live even when is off. Failure to follow
the warnings and instructions in this manual may cause serious injury or death
from electrical shock.
To reduce the risk of burns, electrocution, fire, or injury to persons:
- Disconnect all power sources prior to installing or servicing hand dryer and test for electrical aktivity.
- Check local building codes for proper hardwire installation.
- Do not put any objects into the air outlet, otherwise will get an electric shock risk.
- Do not use where the unit may come into direct contact with water.
- Do not use where the room temperature reaches below 15°F (-10°C) or above 105°F (40°C).
- Do not use under strong direct sunlight as may cause the unit’s sensor malfunction.
- Hand dryer must be appropriately grounded for proper installation.
- Each hand dryer must have its own dedicated circuit line.
- Each hand dryer must be connected to the nearest distribution panel.
- Electricity must not be supplied through an external switching device , such as a timer, or connected to a circuit that is regularly switched on and off.
- Any hand dryer requires supervision for the use by young children or persons with physical, sensory, or mental disabilities to ensure they can use the hand dryer safely.
- Hand dryer is intended for use in commercial and industrial premises only. Not for home use
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>