G21 GRAH 1132 Steel Base Instruction Manual
- October 30, 2023
- G21
Table of Contents
GRAH 1132 Steel Base
Product Information
The Manual Steel Base G21 (GRAH 1132) is a product designed for
installation and use in various settings. The product comes with an
instruction manual available in English, German, Czech, Slovakian,
Hungarian, and Polish languages. The English version of the manual is an exact
translation of the manufacturer’s original instructions. The product may
differ from the images used in the manual, which are for illustrational
purposes only.
Product Usage Instructions
- Before using the product, carefully read through the instruction manual provided.
- Begin by installing the product using the V-A1, V-A4, and V-A5 components.
- Use 8x 1024mm, 6x 1663mm, and 4x 969mm components to assemble the product.
- Use 32x ST4x10mm screws to secure the components in place.
- Ensure that the installation is correct and meets the manufacturer’s specifications.
Note : Any incorrect installation may result in malfunction or damage to the product. If you have any questions or concerns about installation or usage, please contact the manufacturer for assistance.
Thank you for purchasing our product.
Before use, please read these instructions carefully.
Kit before you begin / Site preparation
- Before beginning construction, check local building codes regarding footings, location and other requirements.
- Follow all directions and dimensions carefully.
- Follow the step sequence carefully for correct results.
- Be sure all the parts fit together properly before proceeding.
- SAFETY FIRST: Care must be taken when handling various pieces of your kit because some contain sharp edges. Wear work gloves, eye protection and long sleeves when assembling or performing any maintenance on your kit.
- BASIC TOOLS: Screwdriver, pliers, work gloves, tape measure, level and a spade or shovel.
- GROUND MUST BE LEVEL: Be sure floor frames lie flat on ground. To prepare construction, remove sods and other bumps. Level the high spots with flat shovel and tamp down the construction.
- Separate contents of the carton according to the part number while reviewing parts list. Check to be sure that you have all the necessary parts for your kit.
Parts list
CORRECT/ INCORRECT
Installation
The English version of
the manual is an exact translation of the original manufacturer‘s
instructions. Images used in this manual are for illustrational purposes only
and may differ from the actual product.