AURA SOUND FUNbuds Wireless Earphones Bluetooth Earbuds Noise Cancelling User Manual
- June 5, 2024
- AURA SOUND
Table of Contents
AURA SOUND FUNbuds Wireless Earphones Bluetooth Earbuds Noise Cancelling
Packing List
Product Parameters
Headset
Product Introduction
Function Introduction
Charging Case
Method of Use
Operating Steps
- Open charging case
- Turn on mobile Bluetooth
- Search Aura FUNbuds device in mobile Bluetooth devices
- Click the name
- Apple phone users can wait for a few seconds to pair.
- Other mobile phone users can wait for a few seconds and then click pairing in the pop-up window.
It only needs to open the charging case and then the headset will automatically connect with the device (please ensure the device Bluetooth has been turned on) for next time of use.
Charging Mode
Connect the attached charging cable to the charging case and the USB port of the charging device for charging or wireless charging Please use a UL- certified 5V standard charger, wireless charger or fast charging charger to charge the product.
After-sale Service
The after-sales service of the headset is provided in strict accordance with, local laws and regulations. In Europe, it implements a two-year free warranty policy, while in other countries, it implements a one-year free warranty policy. Man-made damages (such as man-made drop damage, scratch, water inlet, etc.) are not included in the scope of free warranty and replacement. The specific warranty and non-warranty conditions are as follows: The consumer shall provide valid evidence such as purchase invoices or purchase records on e-commerce platforms to prove that the product is within the warranty period.
Non-warranty Regulations
- Beyond the warranty period
- Any failure to use, maintain or repair the product in accordance with the requirements of the user manual, resulting in damage and dirty appearance.
- Any damage caused by the disassembly by non-Aurasound authorized repairers.
- Any water inlet, scratches, occidental drop, or other accidents not caused by Aurasound.
Q&A
Headset Bluetooth cannot be searched after device connection
- Put the headset into the charging case, close the cover, wait for 8 seconds, and open it again to pair.
- Refresh or restart the device’s Bluetooth.
- Restore the factory settings of the headset.
A headset is disconnected or silent
- Put the headset into the charging case again, close the cover, wait for 8 seconds, and open the upper cover to try.
- Operate according to the solution to the above problem.
The maximum volume of iPhone users’ headsets is low (please reduce the volume of the mobile phone before operation)
- Set- sound, and touch – headset safety – reduce the high volume, turn off”Reduce maximum volume”, and then increase the iPhone volume. (determined according to different system versions)
The headset cannot be charged
- Check whether the charging case is powered.
- Check whether there are any foreign matters in the headset placement area of the charging case.
- The rated input of the charging case is 5V 380mA, and the wireless rated input is 5V 220mA. Please do not use any high-power adapter to charge the charging case.
How to restore the factory settings of the headset?
When the headset is turned on, long-press the headset for 8 seconds. After hearing the prompt tone “Power Off”, long-press the headset again. After hearing “Beep”, it indicates that the factory settings are reset. At this time, put the headset into the charging case and cover the box, wait for about 5 seconds to take it out, and then Bluetooth pairing with the new device can be carried out.
Warm tips: the volume shall not be too high in daily use, otherwise it is easy to damage your hearing. Please develop a good listening habit. Toke off your headset every hour to let your ears relax and rest.
Names and contents of hazardous substances in the product
This table is prepared according to SJ/T 11364.
- O: It means that the content of the toxic and hazardous substance in all the homogeneous materials of the component is beyond the Limit requirements specified in GB/T 26572
- x: It means that the content of the hazardous substance in a homogeneous material of the component exceeds the limit requirements specified in GB/T 265/2
Note: the product adopts the environmental protection design concept to effectively control hazardous substances. “X” indicates that hazardous substances can not be replaced due to the limitation of the technical development level.
Environmental friendly service life
Identification refers to the period (ten years) during which the harmful substances in electronic and electrical products will not leak or mutate under normal use conditions, and the user’s use of the electronic and electrical products will not cause serious pollution to the environment or serious domage to people ond property.
Notes
- Please do not put the product in any place with high temperature, humidity, strong acid, etc., so as to avoid failure.
- If the product is not used for a long time, please pay attention to charging the charging bin in time to avoid any effect on the battery service life.
- Improper battery replacement may lead to explosion risk. It can only be replaced by the same type of battery.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>