LINDAY 3.0 USB micro SATA Enclosure User Manual
- June 5, 2024
- LINDAY
Table of Contents
LINDAY 3.0 USB micro SATA Enclosure User Manual
Introduction
Thank you for purchasing the USB 3.0 SATA Enclosure 2.5”. This product has been designed to provide trouble free, reliable operation. It benefits from both a Lindy 2 year warranty and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future reference.
Package content
- USB 3.0 SATA Enclosure 2.5″
- 0.30m USB 3.0 A Male to Micro B cable
- Lindy Manual
Features
- 2.5” Enclosure for SATA hard disks/SSDs up to 9.5mm height and 2TB capacity
- USB 3.2 / 3.1 Gen 1 / USB 3.0 standard (max. 5Gbps), USB 2.0 / 1.1 compliant
- Supports SATA 6 / 3 / 1.5Gbps
- Screwless design
- Chipset: JMS567
- UASP support
- USB bus-powered
- LED indicator
Installation & Operation
Slide open the housing and place the HDD in the disk tray so the SATA connector fits into the backplane. Then close the housing by pushing the top and bottom parts back to the original position again.
Driver installation is not necessary. Modern operating systems already include the necessary drivers.
The LED indicator illuminates solid blue when the hard drive is connected and powered. The LED flashes during data transfer.
Do not disconnect the enclosure whilst the LED is flashing!
Please note: Drives should be safely ejected from the PC rather than just unplugging them.
Radio Frequency Energy, Certifications
CE Certification
LINDY declares that this equipment complies with relevant European CE
requirements.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. Operation is subject
to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired
WEEE (Waste of Electrical and Electronic Equipment),
Recycling of Electronic Products
Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection
and recycling of all waste electrical and electronic equipment. It is no
longer allowable to simply throw away electrical and electronic equipment.
Instead, these products must enter the recycling process.
Each individual EU member state, as well as the UK, has implemented the WEEE
regulations into national law in slightly different ways. Please follow your
national law when you want to dispose of any electrical or electronic
products. More details can be obtained from your national WEEE recycling
agency.
Tested to comply with FCC
standards.
For home and office use.
Hersteller / Manufacturer (EU):
LINDY-Elektronik GmbH
Markircher Str. 20
68229 Mannheim
Germany
Email: [email protected]
T: +49 (0)621 470050
Manufacturer (UK):
LINDY Electronics Ltd.
Sadler Forster Way
Stockton-on-Tees, TS17 9JY
England
[email protected]
T: +44 (0) 1642 754000