Shenzhen Sunricher Technology SR-ZGP2801K4-FOH-E Battery Powered Friends of Hue Switch Instruction Manual
- June 5, 2024
- Shenzhen Sunricher Technology
Table of Contents
Shenzhen Sunricher Technology SR-ZGP2801K4-FOH-E Battery Powered Friends
of Hue Switch
Important: Read All Instructions Prior to Installation
Function introduction
With Plastic Frame
With Glass Frame
Product Data
| Switch Type | Friends of Hue Switch |
|---|---|
| Transmission Range | 10-30m (typical) |
| Radio Frequency | 2.4GHz |
| Power Supply | 3V(1xCR2430 battery) |
| Buttons | 4 |
| Dimensions | 80.5×80.5×14.7mm / 86x86x14mm |
| Operating Temperature | -20 ℃ ~ +45 ℃ |
| Working Humidity | 10% ~ 95% RH non-condensing |
| Waterproof Grade | IP20 |
| Warranty | 5 years |
Product Description
The Friends of Hue switch is a wireless transmitter that communicates with
Philips Hue bridge. The switch uses a CR2430 battery that powers a built-in
transmitter. This transmitter sends wireless radio signals that are used to
remotely control the Philips Hue system.
The switch can be configured through Hue App after added to the Hue bridge. It
enables to control designated light devices in 2 designated rooms with 4
buttons. Functions of the 4 buttons can be configured separately through Hue
App. The configurable functions includes ON/OFF, dim up/dim down, and system
preset scene control.
Safety & Warnings
DO NOT expose the device to moisture.
Operations
Add the Switch to Hue Bridge
- Step 1: configure your Hue Bridge correctly and add light devices to the Hue Bridge through Hue App as instructed.
- Step 2: tap “Accessory setup” on “Settings” page, then tap “Add accessory”, then tap “Friends of Hue switch”.
- Step 3: tap a brand to select it, any brand will work. Then operate the switch as instructed to enable it to be added to the Hue Bridge.
Select designated room/rooms to control
Step 1: Tap to select a room to be controlled by left side on the switch, then right side.
Configure the Switch through Hue App
Step 1: once added successfully, you can use the system suggested setting or configure the switch as per your preferences. Just tap “Done” to use suggested setting, or tap “change settings” to configure as instructed. 4 buttons can be configured one by one separately. Tap the button area to select the button to be configured.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>