cellularline Hark Wireless Stereo Bluetooth Headset with Charging Case User Guide

cellularline Hark Wireless Stereo Bluetooth Headset with Charging Case

User Guide

Description:

1. MF touch control
2. Earbud LED
3. Battery level indicator LED
4. USB-C charging port
5. USB-C charging cable

PRELIMINARY OPERATIONS

Charging Case Charge: Charging Case has an internal battery which allows the earbuds to be recharged without being plugged in to a mains charger. The Charging Case must therefore be charged before recharging
the batteries of the devices.
Connect the charging cable (5) to a USB port and connect the other end to the USB-C charging port (4); the LEDs (3) will gradually turn on to show the charge level of the Charging Case.
Once you have finished recharging, disconnect the Charging Case from the power supply.
Recharging the Earbuds: insert the individual earbuds into the corresponding docks; charging will begin automatically. The LEDs (2) on the earbuds turn on when charging is in progress. The LEDs (2) turn off when charging is complete.
NOTE: if you use only one earbud, remove also the second earbud from the Charging Case to restore the charge, then put them both back into the corresponding docks.
Connecting your mobile phone: remove the earbuds from the charging dock. Both earbuds will automatically switch on and the LEDs (2) will begin to flash; a few seconds later only one will continue to flash, indicating that pairing mode is active. Turn on Bluetooth® on your phone to run a search for devices and select CELLULARLINE HARK when it is detected.

USE:

Switching ON: remove the earbuds from the case
Power OFF: put the earbuds back into the corresponding docks.
To answer a call: press the MF touch control (1) twice.
If both earbuds are inside the Charging Case when there is an incoming call, you can answer even with a single earbud. Remove the right or the left one, wait for the connection and then answer by pressing the MF (1) button.
To end a call: press the MF touch control (1) twice.
Play/Pause: press the MF touch control (1) twice.
FF: press and hold the MF touch control (1) on the right earbud.

Charging case flat battery indicator: the LED (3) flashes when the battery is flat.
Reset: if the device does not work properly, it is possible to carry out a reset to restore factory settings.

• delete all previous pairings from the Bluetooth® menu of the phone, disable Bluetooth® and reboot
• remove one of the earbuds. The LED will start to slowly flash to then speed up.
• press and hold the MF button (1) for about 6 seconds until the LED switches Put the earbud back inside its case.
• remove the second earbud and perform the same procedure described above: hold and press for 6 seconds until the LED switches Put the earbud back inside its case.

Pair again. Remove the earbuds from the case. The LED of one of the two will start to flash rapidly, while the other will flash slowly. Enable Bluetooth® on your smartphone and manually select the name of the device displayed

EARBUD TECHNICAL SPECIFICATIONS:

Bluetooth®: v 5
Supported profiles: Headset – Handsfree – A2DP – AVRCP Range: 10 m
Bluetooth® Frequency Range: 2.4 GHz~2.48 GHz Battery voltage: 3.7 V
Battery Capacity: 40 mAh X 2 USB-C port voltage (V): 5 V USB-C port current: 0.5 A ERP: -5 dBm
Charging Case battery capacity: 3.7 V 300 mAh Stand by Time: 20 hours
Talk Time: 4 hours Play Time: 4 hours
Charging the earbuds: about 2 hrs Charging Case Charge: about 2 hrs Weight: 38 g

EARBUD TECHNICAL SPECIFICATIONS:

Bluetooth®: v 5 Supported profiles: Headset – Handsfree – A2DP – AVRCP Range: 10 m
Bluetooth® Frequency Range: 2.4 GHz~2.48 GHz Battery voltage: 3.7 V
Battery Capacity: 40 mAh X 2 USB-C port voltage (V): 5 V USB-C port current: 0.5 A ERP: -5 dBm
Charging Case battery capacity: 3.7 V 300 mAh Stand by Time: 20 hours
Talk Time: 4 hours Play Time: 4 hours
Charging the earbuds: about 2 hrs Charging Case Charge: about 2 hrs Weight: 38 g

INFORMATION ON THE STATUTORY WARRANTY

Our products are covered by a statutory warranty against conformity defects in accordance with applicable national consumer protection laws. For more information, please see the following page www.cellularline.com/_/warranty

Using the device may, in some cases, interfere with the correct functioning of medical devices (e.g. pacemakers).
Prolonged exposure to high volume and prolonged use may cause permanent damage to hearing.
Do not use the device in places where being unable to hear external noises could prove dangerous (e.g. railway crossings, train platforms)
If used when driving, comply with the regulations in force in the relevant country. Children should be supervised when using the device and all accessories and packa- ging should be kept out of their reach.
Do not expose the device for prolonged periods to damp, dust, soot, steam, direct sunlight, and excessively high or low temperatures, which could result in it malfunctioning
Use only suitable chargers for charging
Regularly charge the product (at least once every 3 months).

Read More About This Manual & Download PDF:

References

• Cellularline Site WW | Homepage
• Cellularline Site WW | Homepage
• CellularLine Site IT | Homepage
• Declaration of conformity | Cellularline Site WW
• CellularLine Site IT | Homepage

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>