Selpic cP104002 Handy Printer User Manual

Selpic cP104002 Handy Printer User Manual

Power On:

• Press and hold the power switch for 3s, the green power indicator will light up.

Operating Steps:

1. Press the Print button.
2. Pair the device to Selpic App and confirm the texts or images you want to print.
3.  Slightly move P1 for printing as soon as the green light flashes.
4. Gently roll P1 to print.

Charging Steps:

1.  When the printing pen is in a low battery state, the power red light will continue to flash 2 times.
2.  Press and hold the Power switch for 3s, the indicator will turn blue, and device will be turned off.
3. Insert USB cable for charging, the indicator will turn red and keep lighting on.
4. When it is fully charged, the indicator light will turn green.

Insert and Remove Ink Cartridges:

1.  Insert the ink cartridge: turn of f the power switch, open the bottom cover, install the ink cartridge as the specified direction, and turn on the power switch.
2.  Remove the ink cartridge: turn off the power switch, open the bottom cover, press the ink cartridge lock, take out the ink cartridge as the specified direction.

 The Maintenance of Portable Printer

• A: It is recommended to close the clip when not using the Pl printer.

• B: If the device hasn’t been used for a white, it is recommended to spray 95% alcohol on the cartridge print head first when using the ink cartridge , then gently wiping the nozzle with a soft cloth. if printed images have lines, then it is recommend to wipe the nozzle with the alcohol solution.

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

ISED Statement

This device complies with Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES‐3(B) /NMB‐3(B).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>