Selpic P1 Handy Printer Instructions
- June 5, 2024
- Selpic
Table of Contents
P1 Handy Printer
Instructions Manual
Power On:
Press and hold the power switch for 3s, the green power indicator will light up.
Operating Steps:
- Press the Print button.
- Pair the device to Selpic App and confirm the texts or images you want to print.
- Slightly move Pl for printing as soon as the green light flashes.
- Gently roll Pl to print.
Charging Steps:
- When the printing pen is in a low battery state, the power red light will continue to flash 2 times.
- Press and hold the Power switch for 3s, and the indicator will turn blue, and the device will be turned off.
- Insert USB cable for charging, the indicator will turn red and keep lighting on.
- When it is fully charged, the indicator light will turn green.
Insert and Remove Ink Cartridges:
- Insert the ink cartridge: turn off the power switch, open the bottom cover, install the ink cartridge in the specified direction, and turn on the power switch.
- Remove the ink cartridge: turn off the power switch, open the bottom cover, press the ink cartridge lock, and take out the ink cartridge in the specified direction.
The Maintenance of Portable Printer
A: It is recommended to close the clip when not using the Pl printer.
B: If the device hasn’t been used for a white, it is recommended to spray 95% alcohol on the cartridge print head first when using the ink cartridge, then gently wipe the nozzle with a soft cloth. if printed images have lines, then it is recommended to wipe the nozzle with the alcohol solution.
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ISED Statement
This device complies with Industry Canada license‐exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not
cause interference, and (2) This device must accept any interference,
including interference that may cause undesired operation of the device. The
digital apparatus complies with Canadian CAN ICES‐3(B) /NMB‐3(B).
This radio transmitter (ISED certification number: 25739-P104002) has been approved by Industry Canada to operate with the antenna types listed with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>