CENGCEN LMC001 Pet Treat Camera User Manual
- June 5, 2024
- CENGCEN
Table of Contents
CENGCEN LMC001 Pet Treat Camera User Manual
Product introduction
The pet treat camera is designed and made by Dongguan LM intelligence tech Ltd. As a new generation of pet intelligence product mainly serves for pet owners, it is especially suitable for those who frequently separate with their pet (say, at work or travelling). Main function of this product includes real- time HD Video on cell phone, Two-way audio interact and remote-controlled pet treat tossing.
Parameter table
Dimensions| 
Units ：mm
---|---
Net weight| 1.5kg
Packaging
weight
| 1.8kg
Volume| 400ml
Video
| Video quality：1080P FOV：130°（diagonal） Focal length：2.8mm
Power supply| 12V,2A
Power adapter| 100-240V 50-60HZ 0.5A
Wireless
network
| 2.4Hz WiFi
5GHz Wifi
Placement
setup
| Mount on wall, place on table or stand on floor
Mobile operating system requirement| Android 4.2 or above IOS 10.2 or above
Features
Figure 3-1. Appearance of pet treat camera
The appearance of pet treat camera is demonstrated in figure 3-1, its main
function could be described as below:
Real-time HD Video
Through internal video transmission module (with 1080p resolution) it would be
easy for the pet owner to see pets on their mobile phone. A wide-angle lens
configuration ensures relatively large range at home could be covered.
The pet treat camera also capable to see pets at lowlight or night
environment, through its auto switch high-brightness Infrared bulb.
Two-way audio interaction
Pet owners could call their pets remotely with the dual-track speaker inside
the pet treat camera. Also, a sensitive microphone allows pet owner to hear
their pets on their mobile phone.
Pet treat tossing
Figure 3-2. Pet treat tossing schematic diagram
The schematic diagram of pet treat tossing process is shown in Figure 3-2.
Specifically, the vertical FOV of camera lens is 70°. If the pet treat camera
is placed in the height of 1-1.5m, it would be able to eject pet treats to a
distance about 1.2-1.5m, followed a curve trajectory which briefly shown on
Figure 3-2 (the red line). Meanwhile, the camera lens is designed with a tilt
angle of approximate 18°, this angle is demonstrated with a relative angle
between main optical axis and the horizontal line (the orange angle). Thus,
this will ensure the pet treats being thrown falling into the right middle of
camera vision. Since pet treats will attract pets, pet owner will conveniently
be able to watch their pets with the best vision angle.
Feeding less amount, more times
Comparing with most pet feeders, the pet treat camera is capable of tossing
much less amount each time, which means one pack with a mere 100g pet snack
could be divided into about 30 triggers. Having more fun with less food, and
also prevent pets from being overweight.
Good sealing, Keep fresh
The top cover of storage space is made of food-grade silicon, also with good
sealing design， pet treats stored will remain fresh and delicious even the
product is placed in high humidity environment.
Instruction manual
Initial mounting and setup
First, plug in the power adapter, which is shown in figure 4-1
Figure 4-1. Power adapter of the pet treat camera
The detail of three recommendation ways of mounting the product is listed in
the table below:
Mount way detail| Stand on the floor| Mount on wall| Place
on table
---|---|---|---
How to fix| Anti-slip silicon foot pad to fix on flat surface
(foot pads are shown in figure 4-2)
| Latch structure designed on the back and a wall hanging hook delivered
together with the product (latch structure and wall hanging hook are shown in
figure 4-3)| Anti-slip silicon foot pad to fix on flat surface
Pet treats tossing
distance
| Short (about 30-50cm)| medium （about 1.2-1.5m）| medium （about 1.2-1.5m）
Matters of attention| 1.Place on flat and smooth surface 2.recommand to place
aside the wall to prevent the product from knocked over by pets| 1. Ensure
latches on the back has been completely plugged in the slot of wall hanging
hooks.
2. Suggest mounting
height of 1-1.5m, as described in section 3.
| 1. Place on flat table surface
2. Suggest mounting height of 1-1.5m, as described in section 3.
Figure 4-2. Anti-slip silicon foot pad on the bottom surface of the product
Figure 4-3. Latch structure (lower) and wall hanging hook (upper)
Wireless network connection
Following the instruction of mobile app, register user account, setup wireless
connection between the product and home wireless networks
Pour in pet treats
Figure 4-4. Pour pet treats into the product
Open the top cover, and pour pet treats in, as illustrated in figure 4-4.
Use mobile app to interact with pets
With mobile app, pet owners could start to interact with their pets.
Specifically, the main user interface is shown in figure 4-5.
- Hit the “feed” button will trigger a tossing process.
- Holding the “talk” button and talk to the microphone of the mobile, the device will start playing the voice.
- Push the “filming” button will enable the user to take a photo
Figure 4-5. Main user interface of mobile app
Pet treats tossing button
A button is designed on one side of the product, pressing this button will
also trigger a pet treats tossing process, this enable pet owners to feed
their pets directly through the device, without opening the mobile app.
Figure 4-6 Pet treats tossing button on one side of the product
Product model list of pet treat camera
| 
| 
| 
---|---|---|---
LMC-001| LMC-002| LMC-003| LMC-004
White| White-Light green| White-Polka dot| Grey
FCC WARNING:
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>