Jingmu JMDW001 Fast Wireless Charger User Manual

Jingmu JMDW001 Fast Wireless Charger User Manual

Quick wireless charger user guide

Thank you for choosing our product! It is a wireless smartphone charger that allows you to easily enjoy the use of digital products. Read the instruction manual before use and keep it for future reference.
Connection to the adapter

1. Connect the adapter to the socket.The wireless charger can choose to work vertically or horizontally. If you choose the vertical, you need to open the rear bracket and hear the sound of click
2. Connect the adapter to the USB 2.0 interface. and a second USBType-C connector for a wireless charger. Standby: LED is off Switching on: the LED lights flashes 3times and then goes out Charging: LED light is onand flashes once every 2 second FOD (foreign object detector): the LED light flashes once every second until foreign objects disappear Full charge: Green LED lights up (on some models) Sketches show the final product. The product packaging contains: a wireless charger. charging cable manual user instructions.

• The network adapter is not included in the set, please buy separately or, if necessary, use the original sticker on your cell phone.

Specification

Input: 5V /2A 9V/1.6A Receiving distance:2-10mm
Output phone: 5W-7.5W-10WConversion: ≥73%
Output watch: 3W Frequency: 100-205KHz NW: 1529 Size: 12.8101cm

Compatibility

Apple phone: iPhone 11/11P/11MAX/Xs/MAX/XR/X/8/8 Plus Samsung phone: Galaxy Note 10+/10/9/8/7 /5/S10+/S10/S9/S9
Plus/S8/S8 Plus/S7IS7 edge/S6 edge plus Any one of the QI protocol phones can support
Headphones: Apple original headsets Air pods

Notes:

Please pay attention to the following issues, otherwise it may cause abnormal charging, high charging temperature, intermittent charging, or even not charging.

1. Please put the phone/watch at the center of charge area
2. Please use common USB Cable or original cable, Otherwise, it may result to danger. When you use a charger for charging, adapter shall be installed nearthe equipment and shall be easily accessible.We recommend QC2.0/3.0 Quick charger adapter (9V /1.67 A). 5V/2A is normal charge, the charging speedwould be slower.）：The productshall only be connected to a USB interface of version USB2.0
3. The charging distance is 2-10 mm, please don’t wear protective case which is over 3mm thick.
4. No metal or magnetic objects around 6cm ·at the back center of the phone during charging.
5. The lower temperature, the faster charging speed. The charging speed is faster in winter than in summer.
6.  Please don’t charge in high temperature and humid environments to avoid damage of circuit.）：Extreme Temperature: 45℃max.
7. Put it at the place that children can’t reach to avoid unnecessary accidents.
   The involved images are sketch maps, the final product as per the material subjects includes: wireless charger, 100cm power cable, user manual *No power adapter, if you need, please purchase separately

FCC Statement:

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could u ’ authority to operate the equipment. Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator & your body

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>