bikemate 710418 Rear Bike Camera with Light User Guide

REAR BIKE CAMERA WITH LIGHT
USER GUIDE

Overview

Congratulations!
You have made an excellent choice with the purchase of this quality BIKEMATE® product.
By doing so you now have the assurance and peace of mind which comes from purchasing a product that has been manufactured to the highest standards of performance and safety, supported by the high-quality standards of Aldi. We want you to be completely satisfied with your purchase, so this BIKEMATE® product is backed by a comprehensive manufacturer’s 3-year warranty and outstanding after-sales service through our dedicated helpline.
We hope you enjoy using this product for many years to come.
If you require technical support or in the unlikely event that your purchase is faulty, please telephone our helpline for immediate assistance. Faulty product claims made within the 3-year warranty period will be repaired or replaced free of charge provided that you have satisfactory proof of purchase.
(keep your receipt safe)
This does not affect your statutory rights. However be aware that the warranty will become null and void if the product is found to have been deliberately damaged, misused, and/or disassembled.

Scope Of Delivery

Components

1. Rear Camera & Light
2. 2 x Mounting Strap
3. Charge Cable
4. 32Gb, Class 10, Micro SD Card
5. Rubber Wedge

General Information

This user guide is based on the standards and regulations that are valid within the UK and EU. Also the country-specific directives and laws outside of the EU.
Reading and storing the user guide
This user guide belongs to this Rear Camera Bike Light (referred to as the “product” below). It contains information on how to set up and use the product. Read the user guide carefully, particularly the safety instructions before using the product. Failure to follow this user guide may lead to severe injury or product damage.
Intended Use
This product is exclusively designed to amplify compatible entertainment devices.
This product is not intended for commercial use.
Only use the product as described in this user guide. Any other use other than directed may lead to damage of the product or equipment and even possible injury. The manufacturer or retailer assumes no liability of damaged caused by improper or incorrect use.
This product IS NOT a toy.

Safety
Explanation of symbols
The following symbols are used on the product and packaging:

| This symbol indicates additional information on the assembly or operation of the product.
---|---
| This symbol refers to the declaration of conformity. Products marked with this symbol meet all the applicable community regulations of the United Kingdom.
| This symbol refers to the declaration of conformity. Products marked with this symbol meet all the applicable community regulations of the European economic area.
| This symbol refers to the disposal of waste electrical and electronic equipment according to Directive 2012/19/EU of the European Parliament and of the Council. The device and the batteries must not be disposed of together with domestic waste. If you want to dispose of the device, do it in an environmentally friendly way by bringing it and the batteries to a public collection point.
| This symbol refers to the box packaging.
The card used is made from widely recycled material.

Safety

Explanations of instructions
The following symbols and signal words are used in this user guide.

WARNING!| This symbol denotes situations that could cause injury to yourself or others.
---|---
CAUTION!| This symbol denotes situations that could cause damage to the product or equipment as well as possible injury to yourself.

NOTE!

| This symbol denotes important information or advice regarding the correct use of the product.

General Safety Instructions

Please read this important safety information before you use this product.
The following warning and caution information is to prevent injury to yourself or others and to prevent damage to your product or equipment.

WARNING!
Risk of electric shock!
Failure to comply with safety warnings and regulations can cause serious injury or death.

• Only connect the product if the mains voltage of the sockets matches the information shown on the rating plate.
• Only connect the product to an easily accessible socket so that you can quickly disconnect it from the mains power in the event of a malfunction.
• DO NOT operate this product if it has visible damage or if the power cables or plug is faulty.
• DO NOT operate this product with wet or damp hands or other body parts.
• DO NOT immerse the product, power cable, plug in water, or other liquids, or expose them to damp or moist conditions.
• DO NOT pull the power cable excessively when disconnecting it to prevent possible shock, fire, or damage to yourself or the product.
• DO NOT excessively bend the power cable. This will minimize excessive wear to the connectors and the power cables.
• If the power cable of the product is faulty it must be replaced to prevent any possible damage to the product and/or user.
• DO NOT open the housing; have repairs performed by qualified professionals. Contacts the service center. No liability is assumed and warranty claims shall be void in the case of unauthorized repairs, improper connection, or incorrect operation.
• DO NOT carry this product in your pockets. If the product is faulty or damaged it may explode or result in a fire if too much pressure is applied to it.
• DO NOT drop this product.
• DO NOT place this product on or in a heating device, such as a microwave, oven, stove, or radiator. This product may explode when overheated.

WARNING!
Risk of electric shock!
Failure to comply with safety warnings and regulations can cause serious injury or death.

• Avoid exposing your product to very cold or very hot temperatures.
  Extreme temperatures can damage the product and reduce the charging capacity and life of the installed battery.

• DO NOT directly connect the positive and negative terminals.
  Doing so will cause the product to malfunction.

• DO NOT leave children unsupervised with this product. It is not a toy.

CAUTION!
Failure to comply with safety cautions and regulations can cause injury or property damage.

• Secure all cables to prevent any possible trip hazards.

NOTE!

• Handle and dispose of this product with care. Never dispose of this product in a fire. Never crush or puncture the product. Contact your local council for safe disposal of this product as it contains a rechargeable Li-Ion battery.

Product Description

Description

1. Camera
2. Rear Light
3. Light Mode Button
4. Dust Cover
5. Light Mount
6. On/Off Button
7. Speaker| 8. Microphone
9. Mounting Bracket
10. Release Catch
11. Vertical Adjustment Screw
12. Velcro Strap
13. Rear Strap Mount
14. Velcro Strap Loop
---|---

Setup

This product has the micro SD card pre-formatted and pre-installed for your convenience. It is recommended that you fully charge the product before use for the best first time experience.
Charging The Camera
To charge the camera, lift the dust cover B 1 and connect the mini USB end of the supplied charge cable B 2 . Connect the other end of the charging cable to an appropriate 5V/1A DC out port on a USB main adaptor.

**** Read the information label on the USB adaptor before use.

Charging Time
The camera will take approximately 4 hours and minutes to fully charge.
A full charge will last approximately up to 8 hours.
Standard Seat Mounting
The camera is mounted to the bicycle seat pole. To fit the camera, first, take the mounting strap C 1 and place the mounting bracket against the seat post. Next, adjust the strap C 4 so that the rear mount C 2 is on the opposite side to the mounting bracket C 1 . Thread the velcro strap C 4 through the strap loop C 3 , pull firmly, and fix it into place.

Aero Seat Mounting
To mount the camera to an aero seat pole, use the same process as previously directed in the Standard Seat Mounting section (page 10). 

Fitting The Camera
Use the vertical adjustment screw E 1 to release and align the bracket to the preferred position for the camera.

Take the camera F 1 and slide it onto the mounting bracket F 2.
When you hear a small click the camera is locked in place.

To release the camera, raise the clip F 3 and slide the camera F 1 off the mount.
**** It is advisable to take the camera with you when you’ve secured your bicycle.

Using The Camera

This product has the micro SD card pre-formatted and pre-installed for your convenience. It is recommended that you fully charge the product before use for the best first-time experience.

Turning The Camera On/Off
To turn the camera on, press and hold the power button A 3 for 3 seconds. You will hear two beeps. The camera will automatically start recording if there is a micro SD card installed and the light will turn on.
To turn the camera off, press and hold the power button A 3 for 3 seconds. You will hear two beeps as before, the light will turn off and the camera will stop recording.

**** When the camera reaches 5% power, it disables the recording function and only allows the use of light.

Recording Confirmation
As covered in the previous section the camera will automatically start recording when it is turned on. This is confirmed with a chasing pattern LED around the lens housing square.

Rear Light Options
The camera has 3 light modes for the rear light:

• Constant
• Flashing
• Multi Strobe

To change between light modes give the power button 3 a quick press.

Brightness Control
The camera has 4 brightness levels for the rear light:

• High
• Medium
• Low
• Off

To change between brightness modes give the light button 6 a quick press.

Digital Storage

Card Installation & Removal
To install the micro SD card, raise the dust cover G 1 to expose the ports. Insert the provided micro SD card G 2 into the card slot G 3 . Push the card in until you hear a click.  The click will indicate that the card is secured in place.

The micro SD card will only fit one way into the slot, data pins towards the lens.
To remove the micro SD card, press the card in until you hear a click. Let go of the card so it protrudes further out of the slot. Now you are able to remove it from the slot.
Please note that the card system is only compatible with Microsoft Windows OS.

Accessing Footage
There are 2 methods to access the footage stored on the card. Directly off the card and via the use of the USB cable.
To access the card directly from the card you will need the use of a Micro SD card adaptor. Insert the micro SD card into the adaptor H 1 . Finally, insert the combined card into an SD card reader.

To access the card from the camera, connect the supplied charge cable H 2 to the mini USB port on the camera and the other end to a USB port on a PC or laptop.
Once connected using either method, the card’s root fold should automatically be displayed on the desktop of the PC or laptop. If not, it is possible to access the card through Windows Explorer.

Double left-click with the mouse on the folder icon named “DCIMA”. This folder will give access to all of the recorded video AVI files.

Double left-click on any of the AVI files to view it in your default playback application.
**** You are able to transfer files to a PC or laptop from the DCIMA folder with either the copy and paste or drag and drop functions.

Repairing The Micro SD Card
In the event that the micro SD card becomes corrupt or doesn’t play/record, try formatting the card. You can do this with either a micro USB adaptor or with the charge cable connected to a PC or laptop.
Once connected in either of the aforementioned methods, right-click on USB Drive-in Windows Explorer and select ‘Format’.

On the ‘Format USB Drive’ dialogue box, make sure FAT32 is selected.
Firstly try ‘Quick Format’ by making sure the check box is ticked and left- click on  ‘Start’. A warning box will show, left click to continue to format the card. This will take a few minutes to perform.

Disconnect the cable and turn the camera off once the formatting is completed. If you have formatted the card directly, remove the card once the formatting has completed, then insert the card into the camera making sure the camera has been turned off beforehand. When the camera is turned on the card will automatically be updated and ready for use.
**** If the card still presents issues, repeat the process, but uncheck the ‘Quick Format’ box. This will take much longer.

Setting Date/Time

Setting The Date & Time
In the root folder, there is a .txt file titled ‘SET TIME’ which contains a brief set of instructions for adjusting the date and time that is displayed in the footage.

In the root folder, double left click on the file titled ‘TIME’ to open it.

• Modify the first line ‘0’ to ‘1’.
• 0n the next line down, modify the line to the correct date and time using YYYY-MM-DD HH:MM:SS format.

• Save the file.
• Restart the camera by turning it off and on again.

Product Care

Please read this important product care information before you store or clean this product. The following information is to prevent damage to your product and to keep it in good working condition.

Storing
It is recommended for long term storage that you do the following:

• DO NOT place heavy items on top of the Camera.
• Always charge the camera before long tern storage.
• Check the battery’s condition every 6 month and recharge if required to keep the battery in optimum condition.
• Always store the camera in a dry ambient temperature place (0 o C – 45 o  ).

Cleaning
It is recommended that to clean your product you do the following:

• Use a damp lint free cloth to wipe over the housing of the alarm clock.
• DO NOT use chemicals or detergents.
• DO NOT attempt to clean the terminals in the charge port.

****Chemicals and detergents can corrode the alarm clock’s housing and could damage the product if there is any liquid ingress.

Technical Data

General
Approx Weight: 140g
Approx Dimensions: 87mm x 40mm x 60mm
Mains Power: 5V/1A
Available Ports: Mini USB
IPX Rating: IPX4

Battery
Battery Type: Internal Li-Ion
Capacity: 3000mAH
Use Time: Approximately 8 hours

Camera
Sensor Solution: Jieli
Sensor Type: CMOS
Video Resolution: 1MP
Viewing Angle: 135°
Minimum Focus Distance: 50mm
Maximum Focus Distance: Indfinity
Video Output Size:1080P
Video Format: AVI

Micro SD Card
Max Size: 32Gb
Supported Version: FAT32
Class: 10

Declaration Of Conformity
Hereby, Quesh Ltd declares that this product is in compliance with:
Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet  address: www.quesh.co.uk/DOC/

Disposal Information

Packaging
The card used in the packaging is made from widely recycled material. Dispose of the box in the council-approved recycle bin. Check with your local authority or at  ww.recyclenow.com to see hich items are collected in your area.

Product
This product uses a 3000mAh Li-Ion internal battery.
Do not dispose of batteries in your household waste.
Please contact your local authority for details on safe disposal.

• Never throw batteries into a or expose to excessive heat sources.
• If batteries are swallowed, please seek immediate medical attention.
• Always ensure correct +/- battery polarity when installing batteries.
• Do not recharge non-rechargeable batteries.

Batteries, should not be thrown away with your household waste. Contact your local authority waste disposal department, as they will be able to provide details of the recycling options available in your area.

Electrical and electronic equipment (EEE) contains materials, partsand substances, which can be dangerous to the environment and harmful to human health. Therefore waste electrical and electronic equipment (WEEE) must be disposed of correctly.
Equipment, which is marked with the WEEE logo (as shown on the left), should not be thrown away with your household waste. Contact your local authority waste disposal department, as they will be able to provide details of the recycling options available in your area.

Warranty Conditions

Dear Customer,
This warranty offers you extensive benefits:
Warranty period: 3 years from the date of purchase. 6 months for wear of parts and consumables under normal and proper conditions of use (e.g. Rechargeable batteries).
Costs:   Free repair/exchange. Refundable postage cost.
Hotline:   01270 508538 (UK) – 11p/min from a BT landline. 1800 995 036 (IE) – free phone service. Calls from mobiles may cost considerably more.
Phone lines Available: Monday to Friday, 9 am to 5 pm (excluding UK bank holidays).
Please contact our AFTER-SALES SUPPORT by phone or email before sending in the device. This allows us to provide support in the event of a possible operator error.
In order to make a claim under the warranty, please send us:

• The completed warranty card with a copy of the original purchase receipt.
• The faulty device with all the accessories included within the packaging.

This warranty does not cover damage caused by:

• Accidental damage or unanticipated events (e.g. Lightning, fire, water, etc).
• Improper use or transportation.
• Disregard the safety and maintenance instructions.
• Other improper treatment or modification of the product.

After the expiry of the warranty period, you still have the possibility to have your product repaired at your own expense. If the repair or the estimate of costs is not free of charge you will be informed accordingly in advance.
This warranty does not affect your statutory rights. In the event that a product is received for repair, neither the service company nor the seller will assume any liability for data or settings possibly stored on the product by the customer.

WARRANTY CARD
REAR BIKE CAMERA WITH LIGHT

Please contact our AFTER-SALES SUPPORT by phone or email before sending in the device. This allows us to provide support in the event of possible operator errors.

MODEL: BLR-12

AFTER-SALES SUPPORT
**** 01270 508538 (GB) 1800 995 036 (IE)
enquiries@quesh.co.uk

PRODUCT CODE
710418
SERVICE CENTRE
Quest LTD.
B7, First Business Park,
First Avenue, Crewe,
Cheshire, UK. CW16BG.
www.quesh.co.uk
Description of malfunction:

Your details:
Date and location of purchase:…………..
Name:……………………………………………….
Address:…………………………………………..
Email:…………………………………………….

Great care has gone into the manufacturing of this product and it should therefore provide you with years of good service when used properly. In the event of a product failure within its intended use of the course of the first 3 years after the date of purchase, we will remedy the problem as quickly as possible once it has been brought to our attention. In the unlikely event of such an occurrence or if you require any information about the product, please contact us via our helpline support services, details of which are to be found both on this user guide and on the product itself.

PRODUCED IN CHINA FOR:
QUEST LTD. B7 FIRST BUSINESS PARK, FIRST AVENUE, CREWE, CHESHIRE. CW16BG.
Visit us at www.quesh.co.uk

AFTER-SALES SUPPORT
710418
01270 50853
www.quesh.co.uk 
MODEL:
Rear Bike Camera With Light
03/2022

References

• Home - Quesh

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>