Quanta NX2KA1 Dev Board Mini User Manual
- June 5, 2024
- Quanta
Table of Contents
NX2KA1 Dev Board Mini
User Manual
NX2KA1 Dev Board Mini
Legal Compliance and operating information
Coral Dev Board and SoM Compliance Statements
Coral USB Accelerator Compliance Statements
Coral Mini PCIe and M.2 Accelerator Compliance Statements
Coral Camera Compliance Statements
Coral Environmental Sensor Board Compliance Statements
Coral Dev Board Mini Compliance Statements
Coral Dev Board and SoM Compliance Statements
Regulatory information
The regulatory information, certification, and compliance marks can be found
on your device. Manufacturer address:
Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA 94043
EMC compliance statement
Important: This device, power adaptor, and other in-box accessories have
demonstrated Electromagnetic Compatibility (EMC) compliance under conditions
that included the use of compliant peripheral devices and shielded cables
between system components. It is important that you use compliant peripheral
devices and shielded cables between system components to reduce the
possibility of causing interference to radios, televisions, or other
electronic devices.
Copyright 2020 Google LLC. All rights reserved.
Regulatory information: United States
See the full Dev Board declaration of conformity for USA here (PDF).
FCC Regulatory Compliance
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by Google could void your
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: This device may not cause harmful interference.
This device must accept any interference received, including interference that
may cause undesired operation.
Radio Frequency Exposure
This device meets the U.S. Federal Communications Commission’s (FCC)
requirements for exposure to radio waves and is designed and manufactured not
to exceed the FCC’s emission limits for exposure to radio frequency (RF)
energy. To comply with FCC RF exposure compliance requirements, a separation
distance of at least 20 cm should be maintained between the antenna of this
device and persons during device operation.
Regulatory information: EU
See the full Dev Board declaration of conformity for EU here (PDF).
EU Compliance Notice
Hereby, Google LLC declares that AA1 is in compliance with Radio Equipment
Directive 2014/53/EU.
Serial number decoder for Dev Board (contains 10 digits):
| Field | Definition | Allowed values |
|---|---|---|
| Y | Last digit of the year of manufacture | 0 to 9 |
| M | Month of manufacture | 1 to 9 (Jan to Sep), A (Oct), B (Nov), C (Dec) |
| DD | Date code of manufacture | 01 to 31 (1st to 31st) |
| P | Product code. Must be unique. | A |
| XXXXX | Number. Must be unique. | Per digit, 0 to 9 and A to Z |
Serial number decoder for System-on-Module (contains 9 digits):
| Field | Definition | Allowed values |
|---|---|---|
| Y | Last digit of the year of manufacture | 0 to 9 |
| M | Month of manufacture | 1 to 9 (Jan to Sep), A (Oct), B (Nov), C (Dec) |
| D | Date code of manufacture | 1 to 9 (1st to 9th), A to X—skip “I” and |
“0”—(10th to 31st)
P| Product code. Must be unique.| A
XXXXX| Number. Must be unique.| Per digit, 0 to 9 and A to Z
Restrictions and Requirements under Directive 2014/53/EU
The device is restricted to indoor use only when operating in the 5150 to 5350
MHz frequency range in AT, BE, BG, CY, CZ, DE, DK, EE, EL, ES, FI, FR, HR, HU,
IE, IT, LT, LU, LV, MT, NL, PL, PT, RO, SE, SI, SK, UK, CH, IS, LI, NO, and
TR.
Frequency Bands and Power
European Union, United Kingdom Data are given here is the maximum radio-
frequency power transmitted in the frequency band(s) in which the radio
equipment operates.
| Frequency | Power |
|---|---|
| WiFi 2400-2483.5 MHz | Max 18 dBm |
| WiFi 5150-5250 MHz | Max 15 dBm |
| WiFi 5250-5350 MHz | Max 15 dBm |
| WiFi 5470-5725 MHz | Max 15 dBm |
| WiFi 5745-5825 MHz | Max 14 dBm |
| Bluetooth 2400-2483.5 MHz | Max 10 dBm |
Radio frequency interference
Google is not responsible for any radio or television interference caused by
unauthorized modification of these devices or accessories, or by the
substitution or attachment of connecting cables and equipment other than that
specified by Google. The correction of interference caused by such
unauthorized modification, substitution, or attachment is the responsibility
of the user. Google and its authorized resellers or distributors are not
liable for any damage or violation of government regulations that may arise
from the user failing to comply with these guidelines.
REACH
REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals,
EC No 1907/2006) is the EU regulation addressing the safe production and use
of chemicals. Google complies with all requirements of the regulation and we
are committed to providing our customers with information about the presence
of REACH Substances of Very High Concern (SVHCs). For information, you can
contact Google at coral-compliance@google.com.
The point of contact for regulatory matters in the EU is Mouser Electronics,
Inc., Elsenheimerstr. 11, 80687 Munich, Germany.
RoHS3 Compliance
This product is in compliance with Directive 2011/65/EU of the European
Parliament and of the Council of 8 June 2011, and with Directive EU/2015/863,
on the restriction of the use of certain hazardous substances in electrical
and electronic equipment (RoHS) and its amendments.
Manufacturer info.
Manufacturer: Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA, USA,
94043
EU Importer info
Mouser Electronics, Inc., Elsenheimerstr. 11, 80687 Munich, Germany
Coral USB Accelerator Compliance Statements
Regulatory information
The regulatory information, certification, and compliance marks can be found
on your device. Manufacturer address:
Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA 94043
EMC compliance statement
Important: This device, power adaptor, and other in-box accessories have
demonstrated Electromagnetic Compatibility (EMC) compliance under conditions
that included the use of compliant peripheral devices and shielded cables
between system components. It is important that you use compliant peripheral
devices and shielded cables between system components to reduce the
possibility of causing interference to radios, televisions, or other
electronic devices.
Regulatory information: United States
See the full USB Accelerator declaration of conformity for the USA here (PDF).
FCC Regulatory Compliance
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Copyright 2020 Google LLC. All rights reserved.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by Google could void your
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: This device may not cause harmful interference.
This device must accept any interference received, including interference that
may cause undesired operation.
Radio Frequency Exposure
This device meets the U.S. Federal Communications Commission’s (FCC)
requirements for exposure to radio waves and is designed and manufactured not
to exceed the FCC’s emission limits for exposure to radio frequency (RF)
energy. To comply with FCC RF exposure compliance requirements, a separation
distance of at least 20 cm should be maintained between the antenna of this
device and persons during device operation.
Regulatory information: EU
See the full USB Accelerator declaration of conformity for EU here (PDF).
EU Compliance Notice
Hereby, Google LLC declares that WA1 is in compliance with EMC Directive
2014/30/EU.
Serial number decoder for USB Accelerator:
| Reid | Definition | Allowed values |
|---|---|---|
| Y | Last digit of the year of manufacture | 0 to 9 |
| M | Month of manufacture | 1 to 9 (Jan to Sep), A (Oct), B (Nov), C (Dec) |
| D | Date code of manufacture | 1 to 9 (1st to 9th), A to X, skip ‘I’ and ‘0’ |
(10th to 31st)
P| Product code. Must be unique.| W
XXXXX| Number. Must be unique.| Per digit, 0 to 9 and A to Z
Radio frequency interference
Google is not responsible for any radio or television interference caused by
unauthorized modification of these devices or accessories, or by the
substitution or attachment of connecting cables and equipment other than that
specified by Google. The correction of interference caused by such
unauthorized modification, substitution, or attachment is the responsibility
of the user. Google and its authorized resellers or distributors are not
liable for any damage or violation of government regulations that may arise
from the user failing to comply with these guidelines.
REACH
REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals,
EC No 1907/2006) is the EU regulation addressing the safe production and use
of chemicals. Google complies with all requirements of the regulation and we
are committed to providing our customers with information about the presence
of REACH Substances of Very High Concern (SVHCs). For information, you can
contact Google at coral-compliance@google.com.
The point of contact for regulatory matters in the EU is Mouser Electronics,
Inc., Elsenheimerstr. 11, 80687 Munich,
Germany.
RoHS3 Compliance
This product is in compliance with Directive 2011/65/EU of the European
Parliament and of the Council of 8 June 2011, and with Directive EU/2015/863,
on the restriction of the use of certain hazardous substances in electrical
and electronic equipment (RoHS) and its amendments.
Manufacturer info
Manufacturer: Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA, USA,
94043
EU Importer info
Mouser Electronics, Inc., Elsenheimerstr. 11, 80687 Munich, Germany
Coral Mini PCIe and M.2 Accelerator Compliance Statements
Regulatory information
The regulatory information, certification, and compliance marks can be found
on your device.
Manufacturer address: Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA
94043
EMC compliance statement
Important: This device has demonstrated Electromagnetic Compatibility (EMC)
compliance under conditions that included the use of compliant host devices
and shielded cables between system components. It is important that you use
compliant host devices and shielded cables between system components to reduce
the possibility of causing interference to radios, televisions or other
electronic devices.
Regulatory information: United States
FCC Regulatory Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by Google could void your
authority to operate the equipment.
Regulatory information: EU
See the full Mini PCIe / M.2 Accelerator declaration of conformity for EU here
(PDF).
Serial number decoder for Mini PCIe and M.2 Accelerator:
| Field | Definition | Allowed values |
|---|---|---|
| Y | Last digit of the year of manufacture | 0 to 9 |
| v | Month of manufacture | 1 to 9 (Jan to Sep) |
An (Oct), B (Nov), C (Dec)
D| Date code of manufacture| 1 to 9 (1st to 9th)
A to X, skip ‘I’ and ‘0’ (10th to 31st)
P| Product code. Must be unique.| M.2 A/E Key = R
M.2 B/M Key = N
Mini PCIe = U
XXXXX| Number. Must be unique.| Per digit, 0 to 9 and A to Z
Radio frequency interference
Google is not responsible for any radio or television interference caused by
unauthorized modification of these devices or accessories, or by the
substitution or attachment of connecting cables and equipment other than that
specified by Google. The correction of interference caused by such
unauthorized modification, substitution, or attachment is the responsibility
of the user. Google and its authorized resellers or distributors are not
liable for any damage or violation of government regulations that may arise
from the user failing to comply with these guidelines.
REACH
REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals,
EC No 1907/2006) is the EU regulation addressing the safe production and use
of chemicals. Google complies with all requirements of the regulation and we
are committed to providing our customers with information about the presence
of REACH Substances of Very High Concern (SVHCs). For information, you can
contact Google at coral-compliance@google.com.
The point of contact for regulatory matters in the EU is Google Commerce
Limited, 70 Sir John Rogerson’s Quay, Dublin 2, Ireland.
RoHS3 Compliance
This product is in compliance with Directive 2011/65/EU of the European
Parliament and of the Council of 8 June 2011, on the restriction of the use of
certain hazardous substances in electrical and electronic equipment (RoHS) and
(EU)2015/863.
Manufacturer info.
Manufacturer: Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA, USA,
94043
Coral Camera Compliance Statements
Regulatory information
The regulatory information, certification, and compliance marks can be found
on your device. Manufacturer address:
Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA 94043
EMC compliance statement
Important: This device, power adaptor, and other in-box accessories have
demonstrated Electromagnetic Compatibility (EMC) compliance under conditions
that included the use of compliant peripheral devices and shielded cables
between system components. It is important that you use compliant peripheral
devices and shielded cables between system components to reduce the
possibility of causing interference to radios, televisions, or other
electronic devices.
Regulatory information: United States
See the full Camera declaration of conformity for the USA here (PDF).
FCC Regulatory Compliance
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by Google could void your
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: 1. This device may not cause harmful
interference. 2. This device must accept any interference received, including
interference that may cause undesired operation.
Radio Frequency Exposure
This device meets the U.S. Federal Communications Commission’s (FCC)
requirements for exposure to radio waves and is designed and manufactured not
to exceed the FCC’s emission limits for exposure to radio frequency (RF)
energy. To comply with FCC RF exposure compliance requirements, a separation
distance of at least 20 cm should be maintained between the antenna of this
device and persons during device operation.
Regulatory information: EU
See the full Camera declaration of conformity for the EU here (PDF).
EU Compliance Notice
Hereby, Google LLC declares that AA1 is in compliance with Radio Equipment
Directive 2014/53/EU.
Serial number decoder for Camera:
| Reid | Definition | Allowed values |
|---|---|---|
| Y | Last digit of the year of manufacture | 0 to 9 |
| M | Month of manufacture | 1 to 9 (Jan to Sep), A (Oct), B (Nov), C (Dec) |
| D | Date code of manufacture | 1 to 9 (1st to 9th), A to X, skip ‘I’ and ‘0’ |
(10th to 31st)
P| Product code. Must be unique.| C
XXXXX| Number. Must be unique.| Per digit, 0 to 9 and A to Z
Radio frequency interference
Google is not responsible for any radio or television interference caused
by unauthorized modification of these devices or accessories, or by the
substitution or attachment of connecting cables and equipment other than that
specified by Google. The correction of interference caused by such
unauthorized modification, substitution, or attachment is the responsibility
of the user. Google and its authorized resellers or distributors are not
liable for any damage or violation of government regulations that may arise
from the user failing to comply with these guidelines.
REACH
REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals,
EC No 1907/2006) is the EU regulation addressing the safe production and use
of chemicals. Google complies with all requirements of the regulation and we
are committed to providing our customers with information about the presence
of REACH Substances of Very High
Concern (SVHCs). For information, you can contact Google at coral-
compliance@google.com.
The point of contact for regulatory matters in the EU is Google Commerce
Limited, 70 Sir John Rogerson’s Quay, Dublin
2, Ireland.
RoHS Compliance
This product is in compliance with Directive 2011/65/EU of the European
Parliament and of the Council of 8 June 2011, on the restriction of the use of
certain hazardous substances in electrical and electronic equipment (RoHS) and
its amendments.
Manufacturer info.
Manufacturer: Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA, USA,
94043
EU Importer info
Mouser Electronics, Inc., Elsenheimerstr. 11, 80687 Munich, Germany
Coral Environmental Sensor Board Compliance Statements
Regulatory information
The regulatory information, certification, and compliance marks can be found
on your device. Manufacturer address: Google LLC, 1600 Amphitheatre Parkway,
Mountain View, CA 94043
EMC compliance statement
Important: This device, power adaptor, and other in-box accessories have
demonstrated Electromagnetic Compatibility (EMC) compliance under conditions
that included the use of compliant peripheral devices and shielded cables
between system components. It is important that you use compliant peripheral
devices and shielded cables between system components to reduce the
possibility of causing interference to radios, televisions, or other
electronic devices.
Regulatory information: United States
See the full Environmental Sensor Board declaration of conformity for the USA
here (PDF).
FCC Regulatory Compliance
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by Google could void your
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: 1. This device may not cause harmful
interference. 2. This device must accept any interference received, including
interference that may cause undesired operation.
Radio Frequency Exposure
This device meets the U.S. Federal Communications Commission’s (FCC)
requirements for exposure to radio waves and is designed and manufactured not
to exceed the FCC’s emission limits for exposure to radio frequency (RF)
energy. To comply with FCC RF exposure compliance requirements, a separation
distance of at least 20 cm should be maintained between the antenna of this
device and persons during device operation.
Regulatory information: EU
See the full Environmental Sensor Board declaration of conformity for EU here
(PDF).
EU Compliance Notice
Hereby, Google LLC declares that AA1 is in compliance with Radio Equipment
Directive 2014/53/EU.
Serial number decoder for Environmental Sensor Board:
| Field | Definition | Allowed values |
|---|---|---|
| Y | Last digit of the year of manufacture | 0 to 9 |
| M | Month of manufacture | 1 to 9 (Jan to Sep), A (Oct), B (Nov), C (Dec) |
| D | Date code of manufacture | 1 to 9 (1st to 9th), A to X, skip ‘I’ and ‘0’ |
(10th to 31st)
P| Product code. Must be unique.| I
XXXXX| Number. Must be unique.| Per digit, 0 to 9 and A to Z
Radio frequency interference
Google is not responsible for any radio or television interference caused by
unauthorized modification of these devices or accessories, or by the
substitution or attachment of connecting cables and equipment other than that
specified by Google. The correction of interference caused by such
unauthorized modification, substitution, or attachment is the responsibility
of the user. Google and its authorized resellers or distributors are not
liable for any damage or violation of government regulations that may arise
from the user failing to comply with these guidelines.
REACH
REACH (Registration, Evaluation, Authorisation and Restriction of
Chemicals, EC No 1907/2006) is the EU regulation addressing the safe
production and use of chemicals. Google complies with all requirements of the
regulation and we are committed to providing our customers with information
about the presence of REACH Substances of Very High Concern (SVHCs). For
information, you can contact Google at coral-compliance@google.com.
The point of contact for regulatory matters in the EU is Google Commerce
Limited, 70 Sir John Rogerson’s Quay, Dublin 2, Ireland.
RoHS Compliance
This product is in compliance with Directive 2011/65/EU of the European
Parliament and of the Council of 8 June 2011, on the restriction of the use of
certain hazardous substances in electrical and electronic equipment (RoHS) and
its amendments.
Manufacturer info.
Manufacturer: Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA, USA,
94043
EU Importer info
Mouser Electronics, Inc., Elsenheimerstr. 11, 80687 Munich, Germany
Coral Dev Board Mini Compliance Statements
Required End Product Labeling
Any device incorporating this module must include an external, visible,
permanent marking or label that states: “Contains FCC ID: HFS-NX2KA1”
Additional testing, Part 15 Subpart B disclaimer
The KA1 modular transmitter is only FCC authorized for the specific rule
parts (i.e., FCC transmitter rules) listed on the grant, and the host product
manufacturer is responsible for compliance with any other FCC rules that apply
to the host not covered by the modular transmitter grant of certification.
The final host product still requires Part 15 Subpart B compliance testing
with the modular transmitter installed.
FCC
This module has been tested and found to comply with the following
requirements for Modular Approval.
- Part 15.247 – Operation within the bands 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz.
- Part 15.407 – General technical requirements.
Test Modes
This device uses various test mode programs for test set up which operate
separately from production firmware. Host integrators should contact grantees
for assistance with test modes needed for module/host compliance test
requirements.
Antennas
The following external antenna type has been approved for use with the “KA1”
| Radio | Antenna Type | Freq. (MHz) | Max. Peak Antenna Gain (dBi) |
|---|---|---|---|
| Bluetooth | Chip | 2402-2480 | 0.9 |
| WiFi 2.4GHz | Chip | 2412-2462 | 0.9 |
| Radio | Antenna Type | Freq. (MHz) | Max. Peak Antenna Gain (dBi) |
Antenna Gain (dBi)
---|---|---|---|---
WiFi 5GHz| Chip| 5150-5250| 2.| -15.
5250-5350| 2.| -15.
5470-5725| 2.| -19.
5725-5850| 3.| -16.
The OEM integrator has to be aware not to provide information to the end user
regarding how to install or remove this RF module in the user’s manual of the
end product which integrates this module. The end user manual shall include
all required regulatory information/warning as shown in the User manual.
In the end product, the antenna(s) used with this transmitter must be
installed to provide a separation distance of at least 20cm from all persons
and must not be co-located or operated in conjunction with any other antenna
or transmitter except in accordance with FCC multi-transmitter product
procedures. Users and installers must be provided with antenna installation
instructions and transmitter operating conditions for satisfying the RF
exposure compliance.
Copyright 2020 Google LLC. All rights reserved.
Documents / Resources
|
Quanta NX2KA1 Dev Board
Mini
[pdf] User Manual
NX2KA1 Dev Board Mini, Dev Board Mini, Board Mini
---|---