Univivi HDMI Switch 4K 5 Ports HDMI Splitter with Remote Control and Power Adapter-Complete Features/User Instruction
- June 5, 2024
- Univivi
Table of Contents
Univivi HDMI Switch 4K 5 Ports HDMI Splitter with Remote Control and
Power Adapter
Specifications
- COLOR: Black and silver
- CONNECTOR TYPE: HDMI
- BRAND: Univivi
- COMPATIBLE DEVICES: PS4, Laptop, PS3, PC, Television, DVD Player, Blu-ray, Xbox
- CABLE TYPE: HDMI
- PRODUCT DIMENSIONS: 4.33 x 2.36 x 0.7 inches
- ITEM WEIGHT: 8.8 ounces
- COMPATIBILITY: Nintendo switch, Blu-ray, PS3, PS4, Xbox, HD-DVD, PC, fire TV, fire TV stick, Roku
- HEIGHT: 26ft
Introduction
A single HDTV can effortlessly switch between 5 HD sources thanks to a multi- HDMI port splitter, which also simplifies the cable tangle and provides a crystal-clear, high-definition viewing experience that is ideal for use in the home, workplace, conference room, and other settings. Our 4k HDMI switch with remote supports ultra HD, 3D, and 36-bit deep color at a maximum resolution of 4k@30hz. With the Nintendo Switch, Blu-ray, PS3, PS4, Xbox, HD-DVD, PC, fire TV, fire TV stick, Roku, and other devices, the HDMI Selector works nicely. Please make sure the resolution of your TV is 4K as well. And to transmit a smooth output, connect our device to your TV within 26 feet using an approved HDMI 2.0 cable. When only one input is active, this HDMI splitter with remote will automatically switch to the current active port. Without getting out of your chair, you may manually pick input sources for several active inputs using built-in buttons or an IR remote controller.
Ultra HD gold-plated 24K connector with quick signal transfer, increased service life, and resistance to oxidation and corrosion. Elegant piano paint design surface, aluminum frame for enhanced heat dissipation.
PACKAGE CONTENTS
- 1x HDMI input splitter
- 1x remote controller
- 1x power adapter
- 1x manual
HOW TO USE
- Plug the HDMI cable source into the input port of the HDMI Splitter Box. (Cable for HDMI input).
- Plug the HDMI output devices into the output ports of the HDMI Splitter Box. (Cables for HDMI Output).
- Connect the HDMI Splitter Box to the 5V/1A power converter before plugging the power supply into a wall socket.
HOW TO SWITCH
METHOD 1
Select the precise input you want by pressing the switch button on the
box.
METHOD 2
Remote Switch: Use your remote switch to pick the desired HDMI input for your HD-TV by aiming it at the IR receiver box.
TROUBLESHOOTING
REMOTE NOT FUNCTIONING
- Verify that the film has been removed from the remote control’s back.
- Check to see if the remote’s battery is still active.
- If the preceding two steps have proven your failure, contact us directly.
NO IMAGE
- Verify that the switcher is connected and that the TV is on.
- Verify the signal source’s power and connectivity.
- Verify the quality of the system connection.
- Examine the cable’s quality.
UNKNOWN IMAGE
- To escape the bad connection, try connecting the wire once again.
- Examine the HDMI cable’s quality.
Frequently Asked Questions
-
How can I make my HDMI splitter function?
Connect the HDMI splitter to your television’s side or back HDMI port. Then, attach the HDMI devices to the available HDMI splitter ports (source devices). Keep in mind that your HDMI splitter can only accept one or two sources at a time. All sources connected to your HDMI splitter and your TV should be turned on. -
Is it possible to combine an HDMI switch with an HDMI splitter?
Due to the differences in its technology, an HDMI splitter cannot be used as an HDMI switch. You cannot swap the two devices, despite the fact that both will let you broadcast the source signal to more devices than there are HDMI ports for. -
Why won’t my TV recognize my HDMI splitter?
Keep your displays and video source powered on, but disconnect the power and HDMI cords from the HDMI splitter.
After a brief delay, re-plug one of the Displays into the splitter. After another brief delay, re-plug the power line into the splitter. -
How does a splitter for 4K HDMI operate?
HDMI splitters receive a signal from a source device and distribute it to several monitors at the same time. The splitter can read and match the signal that each display device is anticipating because HDMI as a signal protocol supports digital handshaking. -
Does 4K support all HDMI splitters?
No, you need pay close attention to an HDMI 4K splitter. Although not all of them, today’s splitters and HDMI switches will enable 4K. It’s less likely to support 4K if you have an older splitter. High-speed cables that work with 4K resolutions are also required. -
Why doesn’t my HDMI switcher function?
Take care to thoroughly re-insert each HDMI cable after carefully unplugging it. Attempt various HDMI cables. Make sure to use the shortest cords feasible if your switch is passive. With a passive switch, your devices might not function. -
What distinguishes an HDMI switcher from an HDMI splitter?
In brief, an HDMI switch accepts several sources and enables you to select (switch) between them while connecting just one cable to your TV. We’ll go into more depth later. A splitter divides a single signal among several HDMI cables, as you’ve probably already guessed. -
What distinguishes an HDMI splitter from an HDMI adapter?
An HDMI splitter accepts a single source and distributes it to several televisions. In contrast, an HDMI switch accepts more than one source and distributes it to a single device or TV via cable output. -
Does quality suffer while using an HDMI splitter?
Because HDMI Splitters are replicating a digital signal, quality is not necessarily reduced. However, there is less of a guarantee when utilizing inferior hardware or an unpowered HDMI Splitter. Due to the length of the HDMI connection, splitters used with excessively lengthy HDMI cables may experience signal quality concerns. -
Do two monitors operate with an HDMI splitter?
A single video stream can be sent simultaneously to two HDMI monitors using HDMI splitters (and graphics cards).