OKYANUS FT-06DCH Active Reader Router Device User Manual
- June 5, 2024
- OKYANUS
Table of Contents
OKYANUS FT-06DCH Active Reader Router Device
SETTING UP DEVICES & RF NETWORK
Rest of the manual guides you through the steps necessary for setting up and configuring your Wipelot devices. Please read this manual before system setup.
Safety
The device must be used solely with its original power adaptor. Please note that the adapter is 110/220V AC
Introduction
Wipelot devices are based on 2.4GHZ IEEE 802.15.4 compliant RF wireless network. To form a minimal 802.15.4 RF Network, you should have at least 1-Router, 1-Reader and Mobile Devices. Main coordinator (router) establishes a mesh network once it is installed. Each plugged reader (receiver), attends this network automatically and relays data for the network. All reader nodes cooperate in the distribution of data in the network. Wipelot’s small sized newborn baby tag is affixed to the ankle of the newborn infant to be tracked. The tag contains an RF transmitter circuit. It transmits message signal, comprising unique identity information, to receivers which are strategically placed within the hospital. The message is propagated along a path by hopping from node to node until it reaches the port wihch is being listened by the Location Provider Service software. Location Provider Software calculates tags’ positions by using RSSI (received signal strength indicator) levels, dimensions of the region to be tracked and fixed position information of the receivers on that region.
Calculated positions are being written on the Location Provider System database. These positions can also be used in real time by remoting technology. This architecture provides flexiblity in integration with third party softwares. Wipelot H-RTLS application comprises an independent service which listens the Location Provider System database. It interpretes fetched information and applies some business rules on it prior to UI interaction. Tags comprise a conductive security element attachment having two ends, whose electrical state will change when stretched, severed, or removed by parting the end. When the electrical state changes an alarm code will be generated and sent to receivers. This information will then be processed as explained above. Built in motion sensor is able to detect unnatural movements like falling, being idle for a certain period of time etc. Alarm will be generated as soon as this kind of movement is detected.
RF affecting factors
All devices’s RF signals can affect some material some extent. If our devices’s RF signal encounter some material especially high-level obstacle severity material as stated in Table 1. Router, Reader and Tags will be decreased range of distance. For this reason, all device have to position as far as possible from especially obstruction of high level obstacle severity material as in Table 1.
Obstruction
|
Obstacle Severity
|
Sample Use
---|---|---
Wood / Wood paneling| Low| İnside a wall or hollow door
Drywall| Low| İnside Walls
Furniture| Low| Couches or office partitions
Clear glass| Low| Windows
Tinted glass| Medium| Windows
People| Medium| High-volume traffic areas that have consirable pedestrian
traffic
Ceramic tile| Medium| Walls
Concrete blocks| Medium/High| Outer wall construction
Mirrors| High| Mirror or reflective glass
Metals| High| Metal office partitions, doors, metal office furniture
Water| High| Aquariums, rain, fauntains
Device Definitions
Active RFID Reader (Wipelot Model No: FT-06DCH)
Router is hierarchically the top-most Node of 802.15.4 RF Network. It forms/manages RF Network, collects all RF Network data and behaves as a gateway from RF Network to upper media. Reader device has red led and green led on itself.
- If green led blinks, it means that the router device tries to form Rf network.
- If green led lighten constantly, it means that the router device forms Rf Network succesfully.
- If red led blinks, it means that the router device take places data communication
- Power: Wipelot FT-06DCH feeds 100-240V AC 50/60Hz and supports working with a battery which has 2900 mAh lithium battery
Wipelot FT-06DCH device has RF propagation (jn5168 chip) that +13 dBm output
power level and it has 2,4 GHz uFl tranmitter antenna which is has 2dBi gain.
Also, FT-06DCH device has and approved UWB module (DWM1000 module) that has
3.1 ~ 8 GHz monopole antenna. We operate at 4.4GHz due to special reason. UWB
Module output power is fully adjustable from 0 dBm to +15.5 dBm via firmware
set by the manufacturer. The device’s antenna type is omnidirectional.
Therefore, the Wipelot FT-06DCH can take signal every direction. If Wipelot
FT-06DCH obstructs by obstacle of in Table 1. The device’s RF signal will
decrease as stated in Table 1. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC
RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS. (1) THIS DEVICE
MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>