DELTACO EV-3226 Electric Vehicle Charger User Manual

: June 13, 2024
: DELTACO

Table of Contents

DELTACO EV-3226 Electric Vehicle Charger
Product Information
Product Usage Instructions
Safety instructions
CONTROL PANEL
Use
Use locations
Compatibility
LED status
Error codes
Electrical protections
Self-test
Cleaning
Storage
USING INSTRUCTION
Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DELTACO EV-3226 Electric Vehicle Charger

Product Information

Product Name: EV-3226 EV Charger
LED Status:
- Ready (6A): Off
- Ready (8A): Off
- Ready (10A): Off
- Ready (13A): Off
- Ready (16A): Off
- Preparing: Off
- Charging: Off
- Charge Complete: Off
- Fault: Flashing
Compatibility:
- Charger EV-3226 is compatible with all electrical vehicles with Type 2 contacts.
- Do not use with other types of vehicles.
Use Locations:
This product is suitable for sheltered locations or areas with roofs, such as a garage or a parking lot with a roof.

Product Usage Instructions

Button:
- Press and hold the button to switch between charging currents (6/8/10/13/16A).
- Single press the button to set a delay timer from 30 minutes to 10 hours.
Charging Current:
The charging current is displayed in ampere (A).
Charging Time:
The charging time is not specified in the manual.
Charge Effect:
The charge effect is displayed in kilowatt-hours (kW/h).
Ready Indicator:
The green LED indicates that the charger is ready.
Connection Indicator:
The green LED indicates that the charger is connected to an electrical vehicle.
Power Indicator:
The green LED indicates that the charger is connected to power.
Charging Status:
The LED status indicates the charging status:
- Ready (6A): Off
- Ready (8A): Off
- Ready (10A): Off
- Ready (13A): Off
- Ready (16A): Off
- Preparing: Off
- Charging: Off
- Charge Complete: Off
- Fault: Flashing
Delayed Start Timer:
The charger has a delayed start timer feature. Please note that the manual does not provide detailed information on how to operate the charger or connect it to an electrical vehicle.
For specific usage instructions, please refer to the manufacturer’s instructions or contact their support.

Safety instructions

Follow the manual to use this device. Failure to follow instruc-tions may result in danger to person or damage to property.
You must also follow the documentation regarding charging of your electric vehicle.
May not operate if used on IT or other unearthed systems such as an isolated winding generator or isolating transformer.
Do not use this product if the cable, plug or this control box is damaged.
Use only for electric vehicle charging.
May only be used under the protection of residual-current circuit breaker.
The device contains no user serviceable parts. Do not open up or modify any part of the device by yourself. Only authorized electricians with safe tools may perform maintenance.
If this product fails to operate correctly, stop using it. Instead contact the retailer where you bought the product or an author-ized electrician or Deltaco’s support.
Do not leave the charger unattended until it is in charging status.
Regularly check the charger for visible damages. Risk of electric shock when using a damaged charger.
Do not disconnect while the device is charging. Neither the ve-hicle plug nor the power plug may be disconnected while in use.
Protect this device from liquids/water, rain, wind, snow and sand, even if it is IP rated, safety first.
Do not immerse this product in water or other liquids.
Should not be used or stored or transported in extreme heat or extreme cold, please see operating and store temperatures.
Operating temperature min -25°C max +50°C ambient temperature. The ambient air should not contain acids or other corrosive or explosive gases.
This product should not be used in proximity of a strong magnetic field.
This product is expected to work normal at altitudes up to 2000 m. At higher altitudes the product might behave unex-pected or there could be risk of electrical hazard.
Do not let the charger hang by the cable, the wear damage on the cable and the contacts can become considerable high since the cable and charger are heavy. Risk of electric shock, damage to property and injury to person. You must support the weight of the charger and cable in safe and stable way. For example, hang the charger on a hook, via the hang hole on the back of the product.
If you have the charger or cable on the ground, they can be easily damaged, keep them off the ground and protected from fall damage.
This product may cause a tripping hazard.
Old or erroneous contacts or cable line branches in the building can cause overheating at high loads, which in turn can be a fire risk. Because of this risk, let an authorized electrical installation company check the electrical installation.
The product shall be plugged directly to a power outlet without the use of an extension cable.
The product shall be connected without the use of an adapter.
This device must be earthed.

CONTROL PANEL

DELTACO-EV-3226-Electric-Vehicle-Charger-fig-8

Button: Switches between 6/8/10/13/16A (Press and hold) Single press to set a delay timer from 30 minutes to 10 hours.
Charging current (In “A” = ampere)
Charging time
Charge effect in kW/h (currently)
Indicates it is ready
Indicates it is connected to an electrical vehicle
Indicates this device is connected to power.
Charging status
Delayed start timer

Use

The control box must be hanged up to reduce cable strain on CEE 16A connector. We recommend that you hang up the control box via the hook.
Connect the power plug to the power outlet, 3 phase contact. The display and LEDs will turn on.
Press and hold the button to switch current before connecting to your car. You can switch between 6/8/10/13/16A.
Single press the button to set a delay timer from 30 minutes to 10 hours. The timer is the time before charging starts. Each long press increases the time with 30 minutes.
To restart the timer from 0 keep pressing until it reaches 0. To completely reset the timer, please disconnect the cable from the power supply and reconnect.
Connect the type 2 plug to your electric vehicle.
The charger automatically detects the connection status and handshaking protocol and starts charging.
Check the display to confirm it is charging.

Use locations

Typical use locations for this product would be sheltered locations or areas with roofs, such as a garage or a parking lot with a roof.

Compatibility

Charger EV-3226 is for all electrical vehicles with Type 2 contacts. Don’t use them with other types.

LED status

DELTACO-EV-3226-Electric-Vehicle-Charger-fig-9

Set timer: if a timer is being set, one of the LEDs will be flashing. Reserved: if the device is in reserved mode the LEDs will be flashing depending on the currently set current. For example, with 6A the 3rd LED will flash.

Error codes

If the there is an on-going fault currently in the device, the display will indicate an error code.
Example: If the residual current device (RCD) has activated it will show: “01” where “01” is the error code.
Display code: 01. Red LED flashes 1 time. Indicates: current leak-age, residual current device(RCD) has activated. Solution: Power the device off and check the electric car and charger.
Display code: 02. Red LED flashes 2 times. Indicates: overcurrent protection activated. Solution: Power the device off and check the electric car.
Display code: 03. Red LED flashes 3 times. Indicates: Earth fault protection activated. Solution: Power the device off and check the distribution grid.
Display code: 04. Red LED flashes 4 times. Indicates: overvolt-age/undervoltage protection activated. Solution: Power the device off and check the distribution grid.
Display code: 05. Red LED flashes 5 times. Indicates: Welding fault protection activated. Solution: Please contact our support. Display code: 06. Red LED flashes 6 times. Indicates: communi-cation error (between control box and car.
Solution: Check if the connectors are tight. Try reconnecting the cables.

Electrical protections

This product has built-in electrical protections. Please see error codes for trouble shooting.

Self-test

When this product starts up, it runs a self-test to ensure safety. It checks electrical protections.
The display will turn on. If the self-test is ok, the display stays on, indicating it is ready.
This is done automatically, and no user action is needed. This information is provided for troubleshooting purposes.

Cleaning

Disconnect from power and use a dry cloth for cleaning this device. For difficult stains use a mild detergent and moist cloth and wipe off with a dry cloth.