Blutron Power Blurton One Series S40 Electric Scooter User Manual

Blutron Power Blurton One Series S40 Electric Scooter

Riding Safety

1. The electric scooter is a recreational product. Before mastering riding skills, you need to practice. Neither Blutron Power Inc. nor its subsidiaries and affiliates) nor the manufacturer is responsible for any injuries or damage caused by a rider’s inexperience or failure to follow the instructions in this document.
2. Please understand that you can reduce the risk by following all the instructions and warnings in this manual, but you cannot eliminate all the risks. Remember that whenever you ride the scooter you risk injury from loss of control, collisions, and falls. When entering public spaces always comply with the local laws and regulations. As with other vehicles, faster speeds require a longer braking distance. Sudden braking on low traction surfaces could lead to wheel slip or falls. Be cautious and always keep a safe distance between you and other people or vehicles when riding. Be alert and slow down when entering unfamiliar areas.
3. Always wear a helmet when riding. Use an approved bicycle or skateboard helmet that fits properly with the chin strap in place, and provides protection for the back of your head.
4. Do not attempt your first ride in any area where you might encounter children, pedestrians, pets, vehicles, bicycles, or other obstacles and potential hazards.
5. Respect pedestrians by always yielding the right of way. Pass on the left whenever possible. When approaching a pedestrian from the front, stay to the right and slow down. Avoid startling pedestrians. When approaching from behind, announce yourself and slow down to walking speed when passing. Please obey local traffic laws and regulations if the situation is different.
6. In places without laws comply with the safety guidelines outlined in this manual. Neither Blutron Power Inc. and its subsidiaries and affiliates) nor the manufacturer is responsible for any property damage, personal injury/death, accidents, or legal disputes caused by violations of the safety instructions.
7. Do not allow anyone to ride your scooter on his/her own unless they have carefully read this manual. The safety of new riders is your responsibility. Assist new riders until they are comfortable with the basic operation of the scooter. Make sure each new rider wears a helmet and other protective gear.
8. Before each ride check for loose fasteners and damaged components. If the scooter makes abnormal sounds or signals an alarm, immediately stop riding. Diagnose your scooter carefully and call your dealer/distributor for service.
9. Be alert! Scan both far ahead and in front of your scooter — your eyes are your best tool for safely avoiding obstacles and low traction surfaces (including, but not limited to, wet ground, loose sand, loose gravel, and ice).
10. To reduce the risk of injury, you must read and follow all “CAUTION” and “WARNING” notices in this document. Do not ride at an unsafe speed. Under no circumstance should you ride on roads with motor vehicles? The manufacturer recommends riders be 14+ years old. Always follow these safety instructions:
    • People who should not ride the scooter include:
    • Anyone under the influence of alcohol or drugs.
    • Anyone who suffers from a disease that puts them at risk if they engage in strenuous physical activity.
    • Anyone who has problems with balance or with motor skills that would interfere with their ability to maintain balance.
    • anyone whose weight is outside the stated limits (see Specifications).
    • Pregnant women.
    • Riders under the age of 18 years old should ride under adult supervision.
    • Comply with local laws and regulations when riding this product. Do not ride where prohibited by local laws.
    • To ride safely, you must be able to clearly see what is in front of you and you must be clearly visible to others.
    • Do not ride in the snow, in the rain, or on roads that are wet, muddy, icy, or that are slippery for any reason. Do not ride over obstacles (sand, loose gravel, or sticks). Doing so could result in a loss of balance or traction and could cause a fall.
11. Do not attempt to charge your scooter if the charge port or the charger is wet.
12. As with any electronic device, use a surge protector when charging to help protect your scooter from damage due to power surges and voltage spikes. Only use the original charger. Do not use a charger from any other product.
13. Do not modify your scooter. Modifications to your scooter could interfere with the operation of the scooter, could result in serious injury and/or damage, and could void the Limited Warranty.

Packing List

When unpacking your scooter, please verify that the above items are included in the package. If you are missing any components, please contact your dealer/distributor or nearest service center (see contact in the user manual). After verifying that all components are present and in good condition, you can assemble your new scooter. Please retain the box and packaging materials in case you need to ship your scooter in the future. Remember to power off your scooter and unplug the power cord before assembling, mounting accessories, or cleaning the mainframe.

Diagram

Dashboard

Could be set between lSkm/h and 32km/h via APP

| Default 12.4 mph (20 km/h)

Could be set between lSkm/h and 25km/h via APP

Sport Mode| 20 mph (32 km/h)| 15.5 mph (25 km/h)

Assembling Your Scooter

1. Unfold the handlebar stem and fasten it. Then unfold the kickstand to support the scooter.
2. Firmly connect the wires inside the handle and the stem. Slide the handle onto the stem. Be aware of the correct orientation.
3. Install six screws (two on each side) with the included hex wrench.
4. Long press the power bottom to verify that your scooter can be powered on

Charging

WARNING
Do not charge if the charge port or power cord is wet. Do not charge or use your battery if it is damaged or see trace of water. Close the charge port cover when not charging.

Learning to Ride

There are safety risks when learning to ride the scooter. You must read the Riding Safety before your first ride.

Wear an approved helmet and other protective gear to minimize any possible injury.

1. Power on the Scooter and check the power level indicator. Charge the Scooter if the battery level is low.

2. Stand on the footrest with one foot and push off with another foot to start gliding.

3. Push the scooter forward to reach 2.5 mph (4 km/h), put your other foot on the footrest to keep both feet stable, and press the throttle to speed up.
   Please note, for your safety, the motor will not engage below 2.5 mph (4 km/h ).

4. Slow down by releasing the throttle; and brake by squeezing the brake lever.
   WARNING
   When hard braking, you risk serious injury due to loss of traction and falls. Maintain a moderate speed and look out for potential hazards.
   

5. To turn, shift your body weight and turn the handle slightly.

Warnings

• DO NOT ride the Scooter in the rain. DO NOT get wet.
• Watch your head when passing through doorways.
• Do not keep your feet on the rear fender.
• DO NOT press the throttle when walking with the Scooter.
• DO NOT carry heavy objects on the handlebar.
• DO NOT ride the scooter with only one foot or one hand.
• DO NOT ride on public roads, motorways, or highways.
• Do not ride through puddles or any other (water) obstacles. In such a case please lower your speed and bypass the obstacle.
• The Scooter is for one rider only. Do not carry any passengers. Do not carry a child. Do not ride when pregnant.
• DO NOT touch the hub motor after riding because it can get hot.
• DO NOT ride up and down stairs or jump over obstacles.
• Do not use a mobile phone or wear earphones when operating the scooter.

WARNING
Always keep both hands on the handlebar, or you risk serious injury due to loss of balance and falls.

Folding and Carrying

Folding

• Turn off your scooter. Release the folding lever and fold the stem down.
• Align the snap hook and the buckle and hook them.

Carrying
When your scooter is folded up, carry it by holding the stem, or drag it by grabbing the handlebar.

Maintenance

Cleaning and Storage
Use a soft, wet cloth to wipe the scooter clean. The scooter need to be dry before storage.

NOTE
Do not wash your scooter with alcohol, gasoline, acetone, or other corrosive/volatile solvents. These substances may damage the appearance and internal structure of your scooter. Do not wash your scooter with a power washer or hose

WARNING
Make sure the scooter is powered OFF, the power cord is unplugged, and the rubber cap on the charge port is tightly sealed before cleaning; otherwise you may damage the electronic components.
Store your scooter in a cool, dry place. Do not store it outdoors for extended periods of time. Exposure to sunlight and temperature extremes (both hot and cold) will accelerate the aging process of the plastic components and may reduce battery life.

Tire Pressure
Inflate tires to 30 psi (210kPa). Inflate both tires equally.

Battery Pack Maintenance
Do not store or charge the battery at temperatures outside the stated limits (see Specifications). Do not puncture the battery. Refer to your local laws and regulations regarding battery recycling and/or disposal.

NOTE
Typically, a fully charged battery should retain power for 120-180 days. A low-power battery should retain power for 30–60 days. Remember to charge the battery after each use. Completely draining the battery may cause permanent damage to the battery.
Electronics inside the battery record the charge-discharge condition of the battery; damage caused by over-charging or under-charging will not be covered by the Limited Warranty.

WARNING

• Do not attempt to disassemble the battery. Do not touch battery contacts. Do not dismantle or puncture the casing. Keep the battery contacts away from metal objects to prevent short circuits. Risk of fire and electric shock. No user-serviceable parts. Do not charge or use your battery if it is damaged or see a trace of water
• Do not ride when the ambient temperature is outside the machine operation temperature (see specifications) because low/high temperature will limit the maximum power/torque. Doing so could cause personal injury or property damage due to slips or falls.

Specifications

| Model No.| S40| S65
---|---|---|---
Dimensions| Unfold: Length x Width x Height| 45.5 × 20 × 46.8 in (1155 × 510 × 1190 mm)
Fold: Length x Width x Height| 45.5 × 20 × 19.1 in (1155 × 510 × 486 mm)
Weight| Net Weight| Approx. 36.2 lbs (16.4 kg)| Approx. 38.8 lbs (17.6kg)

Rider

| Max. Payload| 265 lbs (120 kg)
Recommended Age| 14+ years old
Required Height| 3’11″–6’6″ (120–200 cm)

Machine Parameters

| Typical Range*| Approx. 25 miles (40 km)| Approx. 40 miles (65 km)
Max. Speed| US Version: 20 mph (32 km/h)
EU Version: 15.5 mph (25km/h)
Max. Uphill Slope| Approx. 20%| Approx. 22%
Operating Temperature| 14–104°F (-10–40°C)
Storage Temperature| -4–122°F (-20–50°C)
IP Rating| IPX5

Battery

| Nominal Voltage| 36 VDC
Nominal Capacity| 360 Wh| 540 Wh
Max. Charging Voltage| 42 VDC
Charging Temperature| 32–104°F (0–40°C)
Duration of Charging| 6.5 h| 7.5 h
Motor| Nominal Power| 400 W
Max. Power| 700 W| 800 W

Charger

| Input Voltage| 100–240V 50/60Hz
Output Voltage| 42 VDC
Output Current| 1.5 A| 2A
| Headlight| 2.5 W LED headlight
Features| Brake Light| LED rear light
| Brakes| Front drum brake + rear electric brake
| Tires| 10″pneumatic tires
| Riding Modes| Pedestrian mode (EU only), ECO mode, customizable mode, sport mode

Typical Range: tested while riding under the full battery, 165.3 lbs (75.0 kg) load, 77°F (25°C), 15km/h speed on average on pavement.

Blutron APP

1. Go to the Google Play Store (Android) or the Apple App Store (iOS) and search “Blutron” to download. Install the App and register/log in.
2. Power on the scooter. Please make sure to turn on the Bluetooth function on your mobile device. In the APP, Click “Add Device” to connect to your scooter. When the connection is successful, the scooter will beep and the Bluetooth icon will be illuminated on the dashboard.
3. When the scooter successfully connects to your mobile device, it’s also bound to your Blurton account. If you need to share or transfer the scooter to others, with full APP function, you need to click the info button on the upper right corner of the APP main interface, select “Share Device” or “Remove Device”, then others can connect the scooter to their own Blutron account.
4. The APP’s main interface will display battery level, total and single mileage, and vehicle and battery status. You can lock the scooter, turn on/off cruise control, set speed limit and acceleration for the custom mode, set energy recovery level, and explore more functions in the Blutron APP.

Contact
Contact Blurton or your local dealer/distributor if you experience issues relating to riding, maintenance, and safety, or errors/faults with your scooter. Blutron Power Inc. E-mail Service: [email protected] Website: www.blutronpower.com Have your scooter serial number on hand when contacting Blutron. You can find your serial number on the underside of your scooter.

References

• Blutron Electric Scooters: Urban Transport Revolution | Official Store

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>