Ningbo Hi Yanka Imp Exp YANKA2020 True Wireless Stereo Earbuds User Manual
- June 5, 2024
- Ningbo Hi Yanka Imp Exp
Table of Contents
Ningbo Hi Yanka Imp Exp YANKA2020 True Wireless Stereo Earbuds
CONTROLS AND CONNECTIONS
- SD input
- Recording
- Mode(USB,SD,FM,BLUETOOTH)
- Play/Pause /FM SCAN
- XLR&6.35MM MIC1 input
- Volume control
- XLR&6.35MM MIC2 input
- Volume control
- RCA Line output
- RCA Line input
- MP3 / Line button
- MP3&Line level control
- Voltage button (AC 115v 60Hz/ AC230V 50Hz)
- LCD screen
- USB input
- Recycle(single song recycle all songs recycle)
- Next song/Next channel
- Previous song/Previous channel
- 5 Band EQ control
- EFF control
- Delay volume control
- Repeat volume control
- EFF control
- Master volume control
- EFF level volume control
- LED lights switch
- Fused IEC mains inlet
- Mains power switch
MASTER SLAVE
-
Press MODE button to transfer the speaker under Bluetooth mode.
-
Press PLAY button 3s-5s to initiate the connectivity.
-
Connect the Bluetooth with your phone.
- BT: Connected .( The phone only can be connected with MP3 module on the MASTER speaker)
- BT: Disconnected .(Phone was disconnected with MP3 module)
- TWS: Disconneted .(There’s no interconnection on TWS)
- TWS: SLAVE .( TWS connected successfully, Slave, right channel)
- TWS: MASTRE. (TWS connected successfully, Master, left channel)
SPECIFICATION
- RMS： 250W
- Music: 500W
- Woofer: 2×15’’ 50 OZ Y30 magnet
- Tweeter: 1.35’’ 13 OZ 8 ohm, Ti driver
- Voice Coil: 25.6’’
- Frequency response: 40hz-20Khz
- Coverage: H90°x V 60°
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>