Shenzhen Smart Device Technology SW-1082X Smart Pass Management Module User Manual

Shenzhen Smart Device Technology SW-1082X Smart Pass Management Module

Parameters

Camera

| Resolution| 2 million pixels
---|---|---
Type| Binocular wide dynamic camera
Aperture| F2.4
Focusing distance| 50-150cm
White balance| auto
Photo flood light| LED and IR dual photo flood light

Screen

| Size| 8.0 inch IPS LCD screen
Resolution| 800 X 1280
Touch| Not supported (optional support)

Processor

| CPU| RK3288 quad-core (optional RK3399 six- core, MSM8953 eight- core)
Storage| EMMC8G

nterface

| Network module| Ethernet and wireless (WIFI)
Audio| 2.5W I 4R speakers
USB| 1 USB OTG, 1 USB HOST standard A port
Serial communication| 1 RS232 serial port
Relay output| 1 door open signal output
Wiegand| One Wiegand 26/34 output, one Wiegand 26/34 input
Upgrade button| Support Uboot upgrade button
Wired network| 1 RJ45 Ethernet socket

Function

| Credit card reader| None (optional IC card reader, ID card, ID card)
---|---|---
Face Detection| Supports detection and tracking of multiple people at the same time
Face library| Up to 30,000
1: N face recognition| Support
1: 1 face comparison| Support
Stranger detection| Support
Identify distance configuration| Support
UI interface configuration| Support
Upgrade remotely| Support
Interface| Interfaces include device management, personnel

/ photo management, record query, etc.

Deployment method| Support public cloud deployment, privatized deployment, LAN use, stand-alone use

Infrared thermal imaging module

| Temperature detection| Support
Temperature detection distance| 1 meter (optimal distance 0.5 meter)
Temperature measureme n t

accuracy

| ,,; ±0.5°C
Temperature measurement range| 10’C-42’C
Pixels| 32 X 32 dots (total 1024 pixels)
Visitors’ temperat u- re is normal and

released d i re c tly

| Support
Abnormal tern- perature alarm| Support (temperature alarm value can be set)

General parameters

|

Power

| DC12V ( ± 10%)
Operating temperature|

0’C~40’C

General parameters

| Storage temperature| -20’C-60’C
---|---|---
Power consumption| 13.5W (Max)
Installation method| Gate bracket installation

Size

| Standard: 274.2412821.48 (mm)
IC card/ ID card: 296.18132.8825 (mm)
Packing list| Machine 1, power adapter 1, manual 1, certificate of conformity 1

Installation Notes

1. .Module structure description

2. Port description

3. Installation method (installed with SV-10810) CD

4. According to the requirements of the installation site, open a 35mm diameter hole (as shown in the figure below) in the space position of the gate (usually the middle or front side).
   Single channel gate Dual-channel gate

5. Unscrew the nut at the bottom of the gate head post, thread the cable out of the nut, and remove the nut.

6. Under the gate, insert the cable and cable interface into the gasket and nut in turn, tighten the nut, connect the power supply, and the screen will start.

Note: The brackets in the figure above are for installation reference only, non-standard accessories.

FCC Statement

Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct th interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver .
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: ( 1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Non-modification Statement:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Care and Maintenance

1. During the installation and use of the product, all electrical safety regula­tions must be strictly observed.
2. Please use the power adapter provided by the regular manufacturer. For specific requirements of the power adapter, see the product parameter table.
3.  When installing on the gate, please make sure that the product is installed firmly.
4. lf the product does not work properly, please contact the after-sales service personnel. Do not disassemble or modify the product in any way. (The company does not assume any responsibility for problems caused by unauthorized modification or repair.
5. Do not immerse the product in water. When the product is installed outdoors, try to use it with the rain cover provided by our company.
6. Please understand that you are responsible for properly configuring all passwords and other related product security settings, and keeping your username and password properly.
7. If the equipment does not work properly, please do not disassemble it for repair, otherwise it will affect the equipment warranty.
8. Avoid extreme or extreme environments such as extreme high temperature (or low temperature), high humidity, vibration, radiation, and chemical corrosion during installation and use.

Warranty Card

Dear customer, thank you for purchasing the Face Recognition Pass Management Module. In order to better serve you, please read, fill in and properly keep the warranty card after purchasing the product.

Warranty description:

1.  This warranty card is required to be properly kept by the user as a proof of repair.
2.  This product is guaranteed for one year from the date of purchase.
3. Warranty Equipment During the warranty period, under normal use and maintenance conditions, the machine itself malfunctions. Upon inspection, the company will provide free repair and parts replacement.
4. During the warranty period, if the following events occur, the company has the right to refuse service or charge materials and maintenance service fees as appropriate.
5. This warranty card and valid proof of purchase cannot be provided.
6.  Product failure and damage caused by improper user use.
7.  Damage due to abnormal external forces.
8. It is not our maintenance service, and the user dismantles it to cause damage.
9.  Failures and damage caused by natural disasters or other force majeure factors.
10. Others intentionally damaged.
11. The company reserves the right to modify and interpret all content.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>