Intuitive Surgical ACCRX02 RFID Module Installation Guide
- June 5, 2024
- Intuitive Surgical
Table of Contents
TITLE: Installation Instructions for RFID
Module ACCRX02
DOCUMENT: 818385-02
REVISION: A
PAGE: 1 of 4
The RFID module (Model: ACCRX02) is used with the host devices (model PS4000
and PS4200) and as such, required testing and approval is completed. Use with
any other host device may or may not require additional testing and approval.
Consult Hardware Compliance Engineering for assistance.
The RFID module includes the main block (P/N 318215), the top plate (P/N
318216), the ACCR PCA (P/N 353240-08), ACCRA PCA (P/N 343460-05), the pod
support (P/N 318273), and board support (P/N 318230).
For instruction on how to install RFID module to the host device (PS4000 and
PS4200), refer to Manufacturer Process Instruction, Carriage, Housing
Assembly, USM, IS4000 (P/N 1001924) and Manufacturer Process Instruction,
Carriage Integration, USM, IS4000 (P/N 844505-01). USM = Universal Surgical
Manipulator (aka. Robot Arm).
The label (P/N 510196-02) contains FCC ID (2AAZF-ACCRX02), IC ID
(11508AACCRX02), and RFID Model name (ACCRX02) for identification. See Figure
- The label having white background with black text, is affixed to the module in a manner such that it will remain adhered to the module during the expected life of the product. The minimum size of the font is 4 pt. The label is applied on the main carriage block near the ACCR PCA location. See Figure 2.
Figure 1: Label of RFID module (P/N 510196-01)
Figure 2: Location of Label of RFID module
The label of RFID module is not visible when RFID module is installed on host
device. This is acceptable because FCC ID and IC ID information are also
marked on the rear vent panel of the host device. See Figure 4 for example of
label of the host device containing FCC ID and IC ID information of RFID
module. See Figure 5 for the location.
In addition, the intentional radiator symbol (see Figure 3) is also affixed
along with FCC ID and IC ID information (refer to Label P/N 880175-06 for
PS4000 and P/N 880341-03 for PS4200) on the host device, per EN 60601-1-2
Ed.3. This marking is readily visible to the user of the host device without
the use of tools.
Figure 3: Intentional radiator symbol
Figure 4: Example of label of host device containing FCC ID and IC ID of RF-ID module
Figure 5: Location of label on rear vent panel of host device
Note: Statements below that are within quotation marks have fixed wording.
FCC
The host product must be labeled with the following: “Contains FCC ID: 2AAZF-
ACCRX02”
The host product manual must include following statements:
“This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.”
Changes or modifications, not expressly approved by Intuitive Surgical, may
void the user’s authority to operate the equipment. (Note: the wording for
this statement is not fixed)
Industry Canada
The host product must be labeled with the following (in English and French): “Contains IC: 11508A-ACCRX02”
The host product manual must include following statements (in English and French):
“Under Industry Canada regulations, this radio transmitter may only operate
using an antenna of a type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential radio interference to
other users, the antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (eirp) is not more than necessary for
successful communication.”
“This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.”
CONFIDENTIAL AND PROPRIETARY Intuitive Surgical Inc. Prior to use, use ACCS
to verify that this is the current revision
Template File: 853244 Form_Template Rev D.doc
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>