Shenzhen Good Lighting GD-TLRW-03A21 A3 Wooden Desk Lamp User Manual
- June 5, 2024
- Shenzhen Good Lighting
Table of Contents
Shenzhen Good Lighting GD-TLRW-03A21 A3 Wooden Desk Lamp
User Manual
Some important cautions and use methods are written in this manual.
Please read it before use and keep it properly
The Chapter I:
Features
● Original solid beech wood
The shell is made of beech wood with a clear and natural texture.
● High CRI
Using CRI95 above LEDs,
Perfect color rendering
● Quick USB Charging Port
5*1A USB charging port
● 5 Lighting Colors
There are 5 color temperatures for selection.
● Touch dimmer
Easy changing the brightness by touching the bar.
● Timer to Auto Shut off
40 and 60 minutes timer settings
● 15W Wireless Charger
The highest wireless charging port for quick and easy charge
The Chapter II:
accessories
The Chapter III:
Buttons Function
-
Power key (ON/OFF)
Press once to switch on the lighting, a gain to switching off -
Lighting color
Select the color by pressing on the key, there are 5 color options. -
Night light
Press once to set night light mode, a gain to shut off the mode. -
Timer
Timer setting key, press once for 40 minutes, twice for 60 minutes, and third to cancel the timer setting. -
Brightness control
Slide on the bar to change the brightness. Timer 30-minute indicator: light up in blue(left part of the bar) Timer 60-minute indicator: light up in red (right part of the bar) -
Wireless Charge
Put the phone on the part to charge it.
*The wireless charger will not power off unless the power cord is plugged out.
The Chapter IV:
Specification
Model No.: GD-TLRW-03A21
FCC ID: 2A69X0A3
Power: 8W (Light) 36W(System)
Wireless Charger: 15W
Input: Light DC12V
Adapter: AC100-240V
50Hz (Adapter)
N.W.: 950g
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note :
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. if this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.