Godox SL300II LED Video Light Instruction Manual
- June 5, 2024
- Godox
Table of Contents
Godox SL300II LED Video Light Instruction Manual
GODOX Photo Equipment co., Ltd.
Add.: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street,
Bao’an
District, Shenzhen 5181 03, China Tel: +86-755-29609320(8062)
Fax: +86-755-25723423 E-mail: [email protected]
godox.com
Made in China
Foreword
Thank you for purchasing this Godox Product !
SL30011 has stable light source, high CRI and 8 FX modes. Powerful functions
make it suitable for studio shooting, interview lighting, still life shooting
and video shooting. Optional RC-A6 remote control can realize wireless group
dimming, wireless brightness adjustment and flexible operation.
Main Features:
- With 8 FX modes to simulate various of shooting scene.
- Silent mode: fanless, without noises and interference.
- Strong power mode: the power can be up to the maximum value.
- Built-in Godox 2.4G wireless X system & wirelessly adjust parameters.
- With stable light source and 0% to 100% precise light adjustment.
- With 16 groups and 32 channels wireless control.
- With LI-type bracket to adjust different angles easily.
- Bowens-mount enables to install various of accessories.
- Clear LCD display.
- Excellent heat dissipation.
Warning
- Always keep this product dry. Do not use in rain or in damp conditions.
- Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center.
- Keep out of reach of children.
- As this product do not have waterproof function, please take measures of waterproof in rainy or damp environment.
- Do not use the product in the presence of flammable gases, chemicals and other similar materials.
- As this product has built-in lithium battery. do not disassemble, impact, squeeze or put it into fire. If serious bulge occurs, please do not use. Do not use or store the product if the ambient temperature reads over 40•c.
- Please charge the product with specialized charger and correctly operate it within the defined voltage and working temperate according to the instruction manual.
Body
LCD Panel
LCD Panel
Included Items
Separately Sold Accessories
The product can be used in combination with the following accessories sold separately, so as to achieve best photography effects: RC-A6 remote control, Power Inverter, Softbox, Photographic Umbrella, Light Stand etc.
Power Connection
Use the power cord to connect the LED light to an AC power source and tum on
the
power switch.
Operation
Setting
Mode Selection
1.1 LED silent mode: Short press the fan button to turn on or off the
silent mode. The fan
button will lighten on when the silent mode is off, while turn off when the
silent mode is on. Long press the fan button to enter the brightness range
setting interface on mute mode. Short press the fan button to select 100%
(brightness adjustment range 0%-100% on mute mode) or 20% (brightness
adjustment range 0%-20% on mute mode), and finally long press to exit the
setting interface.
1.2 LED special effects modes: Short press the FX button to enter or exit the light effects. When entering the FX modes. FX icon will be displayed on the LCD panel. Then, turn the FX select dial to choose one mode from the 8 light effects modes to achieve creative shooting.
Light Brightness Adjustment
In LED mode, the light brightness of LED light can be adjusted by turning the
DMX select dial from 0% to 100%. And 1he light brightness will be clearly
displayed on the LCD Panel.
Group GR. Channel CH and ID Setting GR
Setting: Short press GR button to choose group from A. B, C, D, E, F and O to 9.
CH Setting: Short press CH button to choose channel from 1 to 32.
ID Setting: Long press GR and CH button to enter ID setting interface. Then, turn the DIM select dial to choose ID from OFF and 01 to 99.
Wireless Control
With 2.4G wireless system, SL Series SL3001 I have receive and control function. Up to multiple groups of LED lights can be controlled. 32 channels and 99 wireless IDs are available with strong anti-interference capability. Please set the channels, groups and IDs of LED light to 1he same as those of RC-A6 remote control before usage. Adjusting Channel/Group with the Remote Control
-
Press the CH/GR button and the group icon blinks.
Press the”–+”button to choose a group (A to F. Oto 9). -
Press the CH/GR button twice and the channel icon blinks.
Press the”–+”button to choose a channel (1 to 32).
Adjusting ID with the Remote Control
- Double click the CH/GR button and press the’-M+”button to choose ID from OFF or O
to 99.
Adjusting Light Brightness with the Remote Control
- Press the”-“‘+”button to adjust the light brightness.
Adjusting Color Temperature with the Remote Control (The color temperature value of this LED light cannot be adjusted)
- Press 1he SET button of the remote control and the color temperature icon blinks.
Press the’-M+”button to adjust the color temperature.
Remote control reset: press down ‘-‘ and ‘+’ button simultaneously to reset.
Note: The wireless signal can be received only when the controller of LED light is powered on. Remote control is available separately.
Setting color temperature range
The factory setting of remote control’s color temperature range is 2500-1 OOOOK. In order to use remote control conveniently. color temperature range settings are added: when the remote control is off, hold down the SET button and turn it on to enter color temperature adjusting interface. Press C H/GR button to switch the lowest and highest color temperature value and press’-‘ or ‘+’ button to change the value. Press the SET button to confirm it
Technical Data
SL30011
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (l) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 1 5 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Declaration of Conformity:
GODOX Photo Equipment Co.Ltd. hereby declares that the This equipment are in
compliance with the essential requirements and other relevant provisions of EU
Directive 2014/53/EU. They are allowed to be used in all EU member states. For
more information of Doc, Please click this web link:
http://www.godox.oom/DOC/Godox_SL3001LDOC.pdf.
Warranty
Dear customers, as this warranty card is an important certificate to apply for
our maintenance service, please fill in the following form in coordination
with the seller and safe-keep it Thank you!
Note: This form shall be sealed by the seller.
Applicable Products
The document applies to the products listed on the Product Maintenance Information (see below for further information). Dther products or accessories (e.g. promotional Items, giveaways and additional accessories attached, etc.) are not included in this warranty scope.
Warranty Period
The warranty period of products and accessories is implemented according to
the relevant Product Maintenance Information. The warranty period is
calculated from the day(purchase date) when the product is bought for the
first time. And the purchase date is considered as the date registered on the
warranty card when buying the product.
How to Get the Maintenance Service
If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid warranty card. If you cannot provide valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation.
Inapplicable Cases
The guarantee and service offered by this document are not applicable in the following cases:
- The product or accessory has expired its warranty period;
- Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment. falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding and damp environments, etc;
- Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alternation, addition and detachment;
- The original identifying information of product or accessory is modified, alternated, or removed;
- No valid warranty card;
- Breakage or damage caused by using illegally authorized, nonstandard or non-public released software;
- Breakage or damage caused by force majeure or accident;
- Breakage or damage that could not be attributed to the product itself. Once met these situations above. you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope.
Read More About This Manual & Download PDF: