MUVE ACOUSTICS MA-2100FB Star Speaker User Manual

MUVE ACOUSTICS MA-2100FB Star Speaker

Thank you for trusting MUVEACOUSTICS with delivering you excellence in sound. We encourage you to connect with us and become a part of our community!

FEATURES

EAR CUSHIONS REMOVAL

HOW TO CHARGE YOUR EDGE 2PRO

1.  Plug the micro USB connector into the charing port.
2. Red LED will light up during charging. If the Red LED will not light up in few seconds, let the battery charge until Blue LED light is activated.
3. The light will turn Blue once fully charged. Please remove the connector and the earphones is ready to use.

PRODUCT SPECIFICATIONS

• Bluetooth: 5.0
• Bluetooth profiles: HFP、HSP、A2DP、AVRCP
• Connectivity class: Bluetooth Class 2 (10 meter)
• High performance driver:  2 x 10mm
• Frequency response: 20 Hz – 20 kHz
• Sensitivity: 95+/- 3 dB
• Impedance: 32 Ohm
• Signal to noise ratio: ≥57 dB
• Battery type: Lithium-ion polymer battery
• Battery capacity:  60 mAh
• Play time: up to 7 hours
• Recharge Time: about 1.5 hours
• Charging method: Micro USB charging
• Dimensions: 580 x 25 x 25mm

Bluetooth Connection

Devices with Bluetooth 5.0 wireless technology or above, such as Bluetooth wireless technology equipped computers, smartphones, tablets and MP3 players. To use Bluetooth for your audio connection pair EDGE 2PRO with your audio source (music player, smartphone, laptop, or other Bluetooth equipped device that can act as a source of music). First turn on your Bluetooth connection on your device, then press and hold the On/Off button for 3 seconds until you hear “pairing”. The EDGE 2PRO is in pairing mode. The blue and red Sync LED will blink. Make sure Bluetooth is enabled on your audio source and in a few moments ‘MUVEACOUSTICS:EDGE 2PRO’ will appear on your list of possible Bluetooth connections. Press ‘pair’ or ‘connect’ on your device and when the connection is made you will hear “your device is connected”. You are paired. From now on, when you turn on EDGE 2PRO, it will automatically search for the last Bluetooth device it was paired with.

Battery Level and Charging

EDGE 2PRO comes with lithium-ion polymer battery. For best results, fully charge EDGE 2PRO before use. It will take 1.5 hours to fully charged. When the battery voltage is low, red light replaces blue light with voice notification “battery low” every 5 seconds. EDGE 2PRO will automatically shut off, after disconnected or no pairing with Bluetooth enabled device for 5 minutes or when the battery power level is very low. Please use the cable provided to recharge the earphones. Red LED light up during charging and it will turn blue once fully charged.

SAFETY INSTRUCTIONS Warnings

• Contains small parts which may be a choking hazard. Not suitable for children under age three.
• Set a low volume setting before using the earphones.
• Long-term exposure to loud music or sounds may cause hearing damage. It is best to avoid high volume levels when using these earphones, especially for extended periods.
• Do not use these earphones when operating a motor vehicle, a bicycle, machinery or where your inability to hear outside sounds may present a danger to you or others.

Cautions

• Using these earphones limits your ability to hear noises around you, regardless of listening volume.
• Please use caution when using these earphones. Do not drop, sit on, or allow the earphones to be immersed in water.
• This product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
• Unsuitable for children under three years because it might, for instance, contain small parts.
• To prevent possible hearing damage, do not listen at high volume levels for long periods.
• The input voltage to the product is 5V 1A In order to charge the product in safe manner and reliable conditions, please only adopt certified appropriate charger / adapter for charging the product. Only charge the product at ambient tempera-tures between 10 deg °C / 50 deg °F and 40 deg °C / 104 deg °F. Do not heat above 70 deg °C / 158 deg °F, eg. Do not expose to sunlight or throw into fire. Switch off the product after use. Please note that we won’t take any responsibility for any wrong operation (eg. Voltage higher than 5V) as this may result in severe injury or loss of property, and we cannot control the operating process during the time the user using this product. In extreme cases, abuse or misuse of Lithium battery pack can lead to explosion, heat generation, fire development or smoke development.

OPERATIONAL GUIDANCE

for 3 seconds

| Power Off| Red light goes on for  1 second
Disconnect Bluetooth connection| N/A| Your device is

disconnected

| N/A
Function| Button| Audio| LED
---|---|---|---
Phone call in progress| N/A| N/A| N/A
Redialling (last call)| Press the On/Off button twice| N/A| N/A
Incoming call| Press the On/Off button once| N/A| N/A
Refuse incoming call| Press and hold the On/Off button for 2 seconds| N/A| N/A
End a call| Press the On/Off button once| N/A| N/A
Function| Button| Audio| LED
---|---|---|---
Play / pause| Press the On/Off button once| N/A| N/A
Listening music| N/A| N/A| Blue light flashing once every 5 seconds

Increase volume

| Press “+” button repeatedly| ****

with maximum volume alert

| ****

with maximum volume alert

Decrease volume| Press “-” button repeatedly| N/A| N/A
Function| Button| Audio| LED
---|---|---|---
Previous song| Press and hold the “-” button for 1 second| N/A| N/A
Next song| Press and hold the “+” button for 1 second| N/A| N/A
Battery level is low| N/A| Battery Low| Red light flashing once every

5 seconds

Battery charging mode| N/A| N/A| Red light goes on constantly
Battery has been fully charged| N/A| N/A| Blue light goes on constantly

FCC Statement

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment andreceiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. in portable exposure condition without restriction.

ONE-YEAR LIMITED WARRANTY

MUVEACOUSTICS EDGE 2PRO earphones have been subjected to a thorough series of tests to ensure the highest level of dependability. It is unlikely that you will experience any problem, but if a defect should become apparent during the use of this product, MUVEACOUSTICS warrants to the original purchaser that this product will be free from defects in material and workmanship for a period of 12 months from the date of your original purchase from an authorized dealer. If a defect covered by this occurs, MUVEACOUSTICS, at its option, will repair or replace the product purchase at no repair charge (postage charges will apply). If a replacement is necessary and your product is no longer available, a comparable product may be substituted at the sole discretion of MUVEACOUSTICS.
This warranty does not cover normal wear and tear, abusive use or misuse, modification, tampering or by any other cause not related to either materials or workmanship. This warranty does not apply to product used for any industrial, professional or commercial purposes.For any service or technical queries, please contact our service team on the below email. Email: [email protected]

Keep all relevant information for future reference Imported and distributed by Zeeva Electronics Private Limited. All rights reserved 901-902, Trade World C wing Kamla Mill Compound, Senapati Bapat Marg, Lower Parel West, Mumbai-400013

References

• MuveAcoustics - Your Destination for Audio Devices
• Signup Form – MuveAcoustics

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>