Shenzhen Xinhou Technology ACT397 Security Camera User Guide

Security Camera
Quick Guide

Raycom Customer Service
Thanks so much for your support. It there are any questions or dissatisfaction with the product, please kindly let us know first satisfaction is guaranteed.

| Mobil*: +1 202-657-4461
Email: Rraycom@hobnail.com
Website: https://Ftraycom.com
---|---

Network settings:

Note- Please download and install App and connect the camera to the App first before mounting the camera on the wall. Plug n and power cn all cameras near your router for initial setup. Fasten the antennas onto the cameras.

• Make sure that you have a strong WiFi connection at the location of your cameras.

• Make sure you know the SSID (WiFi network name) and password of the 2 4G1.1z WPA-PSK, WPAZPSK WiFi network that you will use.
  Note Pease make sue your wide net. or visible

• Make sure your network has at least 1Mbps upload speed for each camera when Into viewing or 2Mbpsupload speed for each camera when using the cloud service

• Download and install the “meShare” app from GooglePlay or the App Store, and sign up for a free MeShare account. All of your devices will be bound to this account.

Troubleshooting:

• To connect your camera successfully, make sure that you are connecting to a 2 4G117 WPA-PSKANPA2-PSK wit” network. and your network is resale.
• Please make sure that you entered the network name and password correctly. (Note. Both am case-sensrtwe )
• 1/Bule you ale scanning the OP code. please make sure that the display of your phone is bright enough. and avoid glares on the display of your phone.
• Please make sure that your camera is not bound to any account.
• Make sure that you have fastened the antenna onto your camera, and try moving your camera closer to the router for the initial setup.
• Please make sure to enable the location service on your phone.

Note. You can check the status light of the device to see whether it connects to the wife or not. If the status light is blinking red. d’s ready for win configuration. If it is solid blue, it means wifi is connected.

Quick Smart Connection:

1. Download the free 11eShare app from Google Play or the App Store using an Android or ios mobile device Launch the app and sign up for a free account

2. Log in to the app and c lck the Add Device (+) icon on the upper mill corner

3. Ensure your camera is connected to the power supply and click ‘start installation ” to configure the device.
   

4. Scan the QR Code below with your phone.
   {“cm”:1,”meqr”:0}

5. Follow the instruction to select your wifi.
   

6. Enter the password. And tap “Next” to proceed. share app will generate a QR Code, and scan the QR Code with the camera (it will take about 30 seconds to connect the wifi successfully).
   1 TP gsgl123456 21614099
   Note: The wifi password is case-sensitive.
   If it isn’t able to be connected successfully, you can click the “help” option in the upper right corner to check the configuration video.

7. Name the device and set the password after pairing successfully, then you can see the device in APP.
   

8. share camera provides a 30-day Free Trial of Cloud Service. Enjoy 24/7 continuous recording on the cloud storage and you can playback, download, or share footage with your family members. It’s safer to save your videos on cloud storage compared to the SD Card method. No worry about losing the SD card along with the video.

9. Real-time motion detection alerts will show up on your phone when any movements are detected. Playback and download all alert on your mobile anytime.
   Quick Smart connection operation video: https://youtu.be/BGPnpMk5Tks
   

Zink Connection:

1. Log in to the app and prec5 the Add Device (+) icon on the upper right corner. Power on the camera with the power adapter.

2. Scan the QR code on this page to enter the Zink connection method. Your device (s) will be added to your “share” account.
   {“sku”:”TEST-WIRELESS DEVICE”}

3. Select the number of cameras you need to add. Tap “Next”.

4. The interfere will jump to the instruction page below. Clicking “Tap here to begin setup” and click “see more “to enter WLAN settings.
   

5. Find the wifi begin with “ZMD_SAP” and click to connect. (No password is required here.) Tips: Switch off wifi “auto-join” to make sure you can connect to the “ZMD_SAP”. Finally, Click “4— back to the configuration page after your phone connects to the “ZMD_SAP”.

6. Select the will you want to connect to and enter the password. Then click “1 “. (Please make sure your will is 2.4GHz and the password is correct.)
   

7. Note: Read this part if you are using the iPhone. Android users can ignore this paragraph. Please go back to will settings in your iPhone and connect your phone to your wifi again.

8. Switch to the app after your phone connects to the wifi.
   

9. The camera will step into the configuration process (blue light blinks) and it will take about 30 seconds to connect the wife successfully (solid blue light).

10. You can set the camera name, time zone, and password after the device is connected successfully.

11. share provides 30-day Free Trial, 2417 continuous recording “on cloud storage. You can choose whether to subscribe to the service or not after the trial ends. Zink connection operation video –loss system: https://youtu.beiZGuTvpMudUk Zink connection operation video — Android system: https://youtu.be/sDldfLEohy

Status Light Definitions:

Different meaning of the status light?
Solid Red Light: Camera power on
Red Light Blink: Ready for network configuration
Blue Light Blink: Connecting to the network
Solid Blue Light: Wifi connection successful

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user  s encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement
To comply with FCC RF exposure compliance requirements, this grant is applicable to only mobile configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>