Trippe Manufacturing U280-Q01ST-BK Wireless Charger User Manual
- June 5, 2024
- Trippe Manufacturing
Table of Contents
Trippe Manufacturing U280-Q01ST-BK Wireless Charger
DEAR CUSTOMER
Thank you for purchasing this product. For optimum performance and safety,
please read these instructions carefully before connecting, operating or using
this product. Please keep this manual for future reference.
INTRODUCTION
This product is a high-performance wireless charger. This product is suitable for mobile phones, MP3, MP4, digital productions, and other productions based on wireless charging 5W or 10W. Connect the wireless to a power charger, and then you can charge your device-supported wireless charging (MP3, mobile phones, etc) by put it on the charger directly. It is helpful on long time journeys and convenient for business.
FEATURES
- Transmitting terminal input: 5V/2A, or 9V/1.67A
- Transmitting terminal output: 5W or 10W
- Intelligent two-color indicator to show working condition
- Compliant with QI, CE, and FCC standards
- It is light, smart, and convenient to use
SPECIFICATIONS
| Input | Type-c: 5V/2A, or 9V/1.67A |
|---|---|
| Output | 5V/1A, or 9V/1.1A |
| Switch Frequency | 110K-205K |
| Operating Temperature Range | 0~35°C |
| Storage Temperature Range | -20 ~ 70°C |
| Operation Humidity | 10% ~ 80% RH |
| Storage Humidity | 5% ~ 95% RH |
| Size | 139.96(L)69.96(W)14(H)mm |
| Weight | 150g |
PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton:
- Main unit×1
- User Manual×1
OPERATION
Operation Procedures
- Connect the wireless charger with a powered adapter, and then the light will blink blue and red twice.
- Put your device (supported wireless charging) on the charger, a blue LED alternating flash.
- When finished charging, the light will turn blue.
- Please remove your device after fully charged.
Note: When an accident occurs, the light flashes red.
Operation Notes
- For optimum performance, please use the wireless charger according to this user manual.
- Please connect the wireless charger to a power adapter whose output should be 5V/2A or 9V/1.8A.
- Please unplug the wireless charger after using it.
- Do not use the wireless charger with an electronic product that is not in conformity with the specifications, so as to avoid any problem caused by specification mismatching.
- It’s normal that a wireless charger will be a little overheated in the use process.
- When the wireless charger stops working some accidents occur, you need to check whether the device is compatible with this charger.
- Do not let the wireless charger close to the fire, such as stove, candles and etc.
- Do not let the wireless charger soak into liquid, such as a swimming pool, bathtub, etc.
- Do not wash the wireless charger with corrosive cleaner.
- If the wireless charger cannot work properly, please contact the store or distributor in your area.
CONNECTION DIAGRAM
FCC STATEMENT
RF exposure statement
This equipment complies with the FCC RF radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20cm between the radiator and any part of
your body.
FCC Warning
This device complies with Part 18 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE:
Any changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>