MARTIN RANGER MR-600 Stereo Speaker System User Manual

Stereo Speaker System MR-600
Operation Manual

PLEASE READ THIS MANUAL BEFORE USING

INTRODUCTION

Thank you for purchasing the power amplifier, To take full advantage of the amplifier functions, and to enjoy long and trouble-free use, please read this user’s manual carefully.

IMPORTANT SAFETY INSTRUCTION

1. Make sure that the line voltage is AC 220-240V/50Hz If you are not sure, Kindly consult your appliance dealer or local power service company
2. Please put the unit in a ventilated place. Do not operate in a sealed Box.
3. Protect voltage line Avoid high pressure and stamp on, do not pull, or push excessively.
4. Avoid any objects inserted into the unit. It may cause short circuits and unit defect
5. Avoid water, dust, and moisture. Do not put the Flower vase and another water container on the top of the unit.
6. Avoid cleaning with volatile solution Do not spray insecticide. Do not clean with alcohol, painting, gasoline, etc.
7. Avoid covering vents Block up the vents will make the temperature in the unit become higher and will damage the unit.
8. Avoid opening the cover. Do not open, fix, or touch the inner parts, refer to qualified service personnel for help.

FEATURES

1. The built-in Mp3 player is compatible with lossless mode.
2. Built-in FM radio, with searching channels automatically.
3. Radio, MP3play with memory with power off
4. The signal switchover between USB, SD, and RADIO automatically.

FRONT AND REAR PANEL INSTRUCTION

1. Microphone volume adjusts
2.MP3 play/pause or FM scan switch
3.MP3 work mode selects USB/SD/FM/AUX
4. Display screen
5.MP3 next or FM CH+ switch
6.MP3 prey. or FM CH- switch
7. Music volume adjust
8. Power switch
9. Microphone echo adjust
10. Microphone treble adjust
11 . Microphone bass adjust| 12. card data input in surface
13. Microphone 1, 2 jack
14. USB data input interface
15. Music treble adjust
16. Music bass adjust
17. Main channel balance adjust
18. FM radio antenna
19. AUX audio input jack
20. Right channel speaker output
21. Left channel speaker output
22. Fan window
23. AC 220-240V power source input
---|---

REMOTE CONTROL INSTRUCTION

1. POWER: Press it to turn on the unit, and press it again to turn it off.
2. PLAY/PAUSE: Press to play, press again to pause. orderly or FM scan.
3. EQ: Sound field-effect button.
4. MODE: Work mode select U/S/FM/AUX/BT.
5. MUTE: Press it to mute down sound.
6. Maid: Press NH to skip the next track. Press tel to skip prey. track.
7. VOL+/VOL-:Press it to adjust the volume level.
8. REPEAT: Switch the repeat mode.
9. S/U: Press it to turn the S card and U.
10. 0-9:Numeric buttons

SPECIFICATION

Power Output…………………………………………………. 250W+250W
External devices sensitivity…………………………………. 200mv
T.ILD………………………………………………………………⪁0.19% (1KHz/1 W/4 Ω)
Frequency band………………………………………… …..40Hz-20KHz ±2dB
Signal/Noise ratio (with IHFA Filter)…………………….. ?-74dB
Music/Mic tone adjustment: TREBLE…………… ±10dB(1OKHz)
Music/Mic tone adjustment: BASS………………… ±10dB(100Hz)
Power source……………………………………………………. 220-240V 50Hz

The products improved constantly, when the appearance and parameter changes, subject to samples, without prior notice.

•BT Pairing Name: BT-AMPLIFIER

Documents / Resources

| MARTIN RANGER MR-600 Stereo Speaker System [pdf] User Manual
MR-600, Stereo Speaker System, MR-600 Stereo Speaker System
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>