STEG SDSP68 Digital Signal Processor Owner’s Manual

June 5, 2024
STEG

STEG SDSP68 Digital Signal Processor

STEG-SDSP68-Digital-Signal-Processor-PRODUCT-IMG

The DSP is a digital signal processor essential to maximize the acoustic performance of your car audio system.
It consists of a 32-bit DSP processor and 24-bit AD and DA converters.
It can connect to any factory system, even in vehicles featuring an integrated audio processor, since, thanks to the.
De-equalization function, the DSP will send back a linear signal.
It features selectable High and low-level inputs as well as 3.5MM Aux and digital inputs that feed 8 completely variable output
channels. Each output channel has a 31-band equalizer available.it also features a 66-frequency electronic crossover as well as.
BUTTERWORTH or LINKWITZ filters with 6-24dB slopes and a digital time delay line. the user can select adjustments.
That allows him or her to interact with the DSP through a remote control device called DRC.
WARNING:

  1. PC provided with Windows XP, Windows Vista, or Windows 7 operating system, 1.5GHz minimum. Processor speed, 1 GB RAM minimum memory, and a graphics card with a minimum resolution. Of 1024×600 pixels are required to install Iha software and set up Iha DSP.
  2. Before connecting your DSP, carefully read this manual. Improper connections may cause damage to The DSP or to the speakers in the car audio system

PACKAGING CONTENTS

STEG-SDSP68-Digital-Signal-Processor-fig-1

DSP AND DRC INSTALLATION

External dimensionsSTEG-SDSP68-Digital-Signal-Processor-
fig-2

How to install **

STEG-SDSP68-Digital-Signal-Processor-
fig-3**

WARNING: do not use aggressive cleaning agents or abrasive cloth to clean the display. Simply use a soft cotton collar lightly damped with water.

CONNECTION PANELS-DESCRIPTION **

STEG-SDSP68-Digital-Signal-Processor-
fig-4**

SOFTWARE INSTALLATION

DSP GUI installation
  1. insert CD, Double-Click DSPSTEG-SDSP68-Digital-Signal-Processor-fig-5

  2. Click 2 & 3
    STEG-SDSP68-Digital-Signal-Processor-fig-6

  3. Click 4 & 5STEG-SDSP68-Digital-Signal-Processor-fig-7

  4. Click 6STEG-SDSP68-Digital-Signal-Processor-fig-8

**GUI OPERATION INSTRUCTION

**

**Guide to GUI after installation

**

  1. Double-click the icon of DSP-CONTROL
  2. Enter the GUI you long for Now you could tone every signal detail as experts do To bring sound effects on your beloved car to a higher level. If the password has been set, You need to enter the passwordSTEG-SDSP68-Digital-Signal-Processor-fig-10

Interface introduction

  1. DSP interface guidanceSTEG-SDSP68-Digital-Signal-Processor-fig-11

  2. FILE MAIN MENU 1

  3. Connect(connect to the DSPSTEG-SDSP68-Digital-Signal-Processor-fig-12

  4. Language (choose your need language)

  5. Open (To load the preset file in the PC folder)

  6. Save (To save setting to PC)

  7. Save as (To save another file setting to PC)

  8. Restore Factory (To save the preset file in DSP)

  9. Modify PasswordSTEG-SDSP68-Digital-Signal-Processor-fig-14

  10. Read From Device

  11. Exit

  12. INPUT MODE
    To select different input devices.

  13. CHANNEL SETTING

  14. CH mode(2CH 4CH 6CH MIX).

  15. Input channel

  16. When h highlighted red is selected, this channel input is indicated. If t wo or more are selected, t his channel input s indicated

  17. 0 ° CIiek o to watch to 180 ·, corresponding to the output of the channel

  18. Output channel: FL FullRange.FR FullRange.
    When you click the drop-down button, you can choose the state of the channel input. There is a Null Front Rear Center Subwoofer and Full.Tweeter.Mid-T.Midrange. M-WF. Woofer.STEG-SDSP68-Digital-Signal-
Processor-fig-18
    Options on the Link are for combining settings for Left CH and Right CH. Options on the Left CH/right CH allow you to tone each selected channel respectivelySTEG-SDSP68-Digital-Signal-Processor-
fig-19

  19. CROSSOVER X-TPE.
    To choose a different crossover type, for example, select CH selection on the 3RD spot .that would locate CH you want to choose for crossover configuration STEG-SDSP68-Digital-Signal-Processor-fig-20

  20. CROSSOVER FREQUENCY.
    Set frequency of LP/HP individually

  21. GAIN.
    0–40dB is an optional range for gain control of every CHSTEG-SDSP68-Digital-
Signal-Processor-fig-22

  22. DELAY.

  23. Auto configuration(base on 1.5 setting).

  24. Manual configuration, change specifications in selected CH manuallySTEG-SDSP68-Digital-Signal-Processor-fig-23

  25. LP/SLOPE.
    1.6dB/oct 12dB/oct 18dB/oct 24dB/oct 30dB/oct
    36dB/oct. 42dB/oct 48dB/oct are available

  26. HP/SLOPE
    1.6dB/oct 12dB/oct 18dB/oct 24dB/oct 30dB/oct
    36dB/oct.42dB/oct 48dB/oct are available

  27. Filter Model.
    To choose different Filter type Linkwitz Bessel Butterworth.

  28. WRITE.
    To Write To Device(POS1-POS8STEG-SDSP68-Digital-Signal-Processor-
fig-27

  29. READ.
    To Read From Device(POS1-POS8).STEG-SDSP68-Digital-Signal-Processor-
fig-28

  30. X-OVER AND EQ CHARTS.

  31. Red lines and slopes will change accordingly when HP/LP of crossover and EQ are modified.

  32. EQ all frequency points can be moved left or right.For 20Hz-20KHz can be any Regulation.STEG-SDSP68-Digital-Signal-Processor-fig-29

  33. EQ SETTING.
    Q volue=1-12.STEG-SDSP68-Digital-Signal-Processor-
fig-30

REMOTE INTRODUCTION

  1. A.Main volume.
    B.When you press this button for a short time,lt is in the “MUTE” state. And the close “MUTE’:
    C.When you press this button for a longer time(for a second), It will enter the menu mode. In the”MODE” or”INPUT” fishing. You can adjust the mode which you want.

  2. Main volume display window.

  3. DSP mode display window(1-8).

  4. input display status.(CD.AUX.SPDIF.WIFI).

TECHNICAL FEATURES

STEG-SDSP68-Digital-Signal-Processor-
fig-33 STEG-SDSP68-Digital-Signal-Processor-
fig-34

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals