STEG ST10 Subwoofer Speaker System Owner’s Manual
- June 13, 2024
- STEG
Table of Contents
ST10
SUBWOOFER SPEAKER SYSTEM
OWNER’S MANUAL
Thank you for purchasing a STEG Subwoofer Speaker. It is a state-of-the- art product specifically designed and engineered for vehicle use, and has been thoroughly tested to ensure consistent and reliable performance.
Should you have any questions regarding the installation or operation of your STEG Subwoofer Speaker, which are not answered in this manual, please contact your dealer for assistance.
FEATURES
10″ Subwoofer Speaker
Rms. Power: 200W
Aluminum alloy bracket
Special glass fiber basin with rubber edge
2 ohm 2″ Aluminum Voice Coil
53.4 Oz Magnet Structure
PRECAUTIONS
- Before making holes, check the mounting space with supplied template.
- To prevent noise pick-up, keep the wiring away from motors, high voltage leads and other potential noise sources.
- To prevent a short-circuit, keep all wiring away from moving parts and sharp edges.
- Make sure you carefully read and understand the installation instructions before installing this subwoofer in your vehicle.
SPECIFICATIONS|
ST10
---|---
Rms.Power (W)|
200
Fo (Hz)|
26
Nominal lmpedance (Ω) |
2
Sensitivity@1w/1m (dB)|
84.5
Frequency Range|
26Hz~1KHz
Magnet|
53.4 Oz
Voice Coil |
2″
Cone|
Rubber rimmed glass fiber basin
Mounting Depth (mm)|
110
Mounting Diameter (mm) |
232
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>