SHARP ES-HFH814AWC-IT Washing Machine User Manual

ES-HFH814AWC-IT
Washing Machine
User Manual

** Thank you for choosing this product.**
This User Manual contains important safety information and instructions on the operation and maintenance of your appliance.
Please take the time to read this User Manual before using your appliance and keep this book for future reference.

| FIRE| Warning; Risk of fire / flammable materials
| CAUTION| Injury or property damage risk
| IMPORTANT / NOTE| Operating the system correctly

SAFETY INSTRUCTIONS

Operating voltage/frequency Total current (A)| (V/Hz) (220-240)
V~/50Hz
---|---
Water pressure (Mpa)| 10
Water pressure (Mpa)| Maximum 1 Mpa / Minimum 0. 1Mpa
Total power (W)| 2200
Maximum washing capacity (dry laundry) (kg)| 8. 0

• Do not install your machine on a carpet or such grounds that would prevent the ventilation of its base.
• The appliance is not intended for use by people (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
• Children of less than 3 years should be kept away unless continuously supervised.
• Call the nearest authorized service center for a replacement if the power cord malfunctions.
• Use only the new water inlet hose coming with your machine when making water inlet connections to your machine. Never use old, used or damaged water inlet hoses.
• Children should not play with the appliance.
  Cleaning and user maintenance should not be made by children without supervision.

NOTE: For a softcopy of this user manual, please contact the following address: “washingmachine@ standard test. info”. In your e-mail, please provide the model name and serial number (20 digits) which you can find on the appliance door.

Read this user manual carefully.
Your machine is for domestic use only.
Using it for commercial purposes will cause your warranty to be canceled.
This manual has been prepared for more than one model therefore your appliance may not have some of the features described within. For this reason, it is important to pay particular attention to any figures whilst reading the operating manual.

1.1 General Safety Warnings

• The necessary ambient temperature for the operation of your Washing Machine is 15-25 °C.

• Where the temperature is below 0 °C, hoses may split or the electronic card may not operate correctly.

• Please ensure that garments loaded into your Washing Machine are free from foreign objects such as nails, needles, lighters, and coins.

• It is recommended that for your first wash, you select the 90˚ Cotton program without laundry and half fill compartment II of the detergent drawer with a suitable detergent.

• Residue may build up on detergent and softeners exposed to air for a long period of time. Only put softener or detergent in the drawer at the beginning of each wash.

• Unplug your Washing Machine and switch off the water supply if the Washing Machine is left unused for a long time. We also recommend that you leave the door open to prevent the build-up of humidity inside the Washing Machine.

• Some water may be left in your Washing Machine as a result of quality checks during production.
  This will not affect the operation of your Washing Machine.

• The packaging of the machine could be hazardous to children. Do not allow children to play with the packaging or small parts from the Washing Machine.

•  Keep the packaging materials in a place where children cannot reach them, or dispose of them appropriately.

• Use pre-wash programs only for very dirty laundry.
  Never open the detergent drawer while the machine is running.

• In the event of a breakdown, unplug the machine from the main supply and turn the water supply off. Do not attempt to carry out any repairs. Always contact an authorized service agent.

• Do not exceed the maximum load for the washing program you have chosen.
  Never force the door open when your Washing Machine is running.

• Washing laundry containing flour may damage your machine.

• Please follow the manufacturers’ instructions
  regarding the use of fabric conditioner or any similar products that you intend to use in your Washing Machine.

• Make sure that the door of your Washing Machine is not restricted and can be opened fully.

• Install your machine in a location that can be fully ventilated and preferably has constant air circulation.
  Read these warnings. Follow the advice given to protect yourself and others from risks and fatal injuries.
  RISK OF BURNS
  Do not touch the drain hose or any discharged water while your Washing Machine is running. The high temperatures involved pose a burn risk.
  RISK OF DEATH FROM ELECTRICAL CURRENT
  

• Do not connect your Washing Machine to the mains electricity supply using an extension lead.
  

• Do not insert a damaged plug into a socket.
  

• Never remove the plug from the socket by pulling the cord. Always hold the plug.
  

• Never touch the power cord/plug with wet hands as this could cause a short circuit or electric shock.
  

• Do not touch your Washing Machine if your hands or feet are wet.
  

• A damaged power cord/plug can cause fire or give you an electric shock. When damaged it must be replaced, this should only be done by qualified personnel.
  Risk of flooding
  

• Check the speed of the water flow before placing the drain hose in a sink.
  

• Take necessary measures to prevent the horse from slipping.
  

• Water flow may dislodge the hose if it is not properly secured. Make sure the plug in your sink does not block the plug hole.
  Danger of Fire

• Do not store inflammable liquids near your machine.

• The sulfur content of paint removers may cause corrosion. Never use paint-removing materials in your machine.

• Never use products that contain solvents in your machine.

• Please ensure that garments loaded into your Washing Machine are free from foreign objects such as nails, needles, lighters, and coins. Risk of fire and explosion
  Risk of falling and injury

• Do not climb on your Washing Machine.

• Make sure hoses and cables do not cause a trip hazard.

• Do not turn your Washing Machine upside down or on its side.

• Do not lift your Washing Machine using the door or detergent drawer.
  **The machine must be carried by at least 2 people.
  Child safety**

• Do not leave children unattended near the machine.
  Children might lock themselves in the machine resulting in the risk of death.

• Do not allow children to touch the glass door during operation. The surface becomes extremely hot and may cause damage to the skin.

• Keep packaging material away from children.

• Poisoning and irritation may occur if detergent and cleaning materials are consumed or come into contact with the skin and eyes. Keep cleaning materials out of the reach of children.

1.2 During Use

• Keep pets away from your machine.

• Please check the packaging of your machine before installation and the outer surface of the machine once the packaging has been removed. Do not operate the machine if it appears damaged or if the packaging has been opened.

• Your machine must only be installed by an authorized service agent. Installation by anyone other than an authorized agent may cause your warranty to be void.

• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
  Cleaning and user maintenance shall not be done by children without supervision.

• Only use your machine for laundry that is labeled as suitable for washing by the manufacturer.

• Before operating the washing machine, remove the 4 transit bolts and rubber spacers from the rear of the machine. If the bolts are not removed they may cause heavy vibration, noise, and malfunction of the machine and cause the guarantee to be void.

• Your warranty does not cover damage caused by external factors such as fire, flooding, and other sources of damage.

• Please do not throw away this user manual; keep it for future reference and pass it on to the next owner.
  NOTE: Specifications for the machine may vary depending on the product purchased.
  Replacement of drive belt, only by authorized service.
  Only original spare belt: 42006396
  Optibelt 6 EPJ 1236

1.3 Packaging and Environment

Removal of packaging materials
Packaging materials protect your machine from any damage that might occur during transportation. The packaging materials are environmentally friendly as they are recyclable. The use of recycled material reduces raw material consumption and decreases waste production.
1.4 Savings Information
Some important information to get the most efficient use out of your machine:

• Do not exceed the maximum load for the washing program you have chosen. This will allow your machine to run in energy-saving mode.
• Do not use the pre-wash feature for lightly soiled laundry. This will help you save on the amount of electricity and water consumed.

CE Declaration of conformity
We declare that our products meet the applicable European Directives, Decisions, and Regulations and the requirements listed in the standards referenced.
Disposal of your old machine
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

TECHNICAL SPECIFICATIONS

|
---|---

2.1 General Appearance

1. Programme Dial
2. Electronic Display
3. Upper Tray
4. Detergent Drawer
5. Drum| 6. Pump Filter Cover
7. Water Inlet Valve
8. Power Cable
9. Discharging Hose
10. Transit Bolts
---|---

2.2 Technical Specifications

Maximum
dry laundry capacity (kg)| 8
Spinning revolution (rev/min)| 1400
Program number| 15
Dimensions (mm)
Height
Width Depth| 845
597
557

INSTALLATION

3.1 Removing the Transit Bolts

1. Before operating the washing machine, remove the 4 transit bolts and rubber spacers from the rear of the machine. If the bolts are not removed, they may cause heavy vibration, noise, and malfunction of the machine and void the warranty.
2. Loosen the transit bolts by turning them anticlockwise with an appropriate spanner.
3. Remove the transit bolts with a straight pull.
4. Fit the plastic blanking caps supplied in the accessories bag into the gaps left by the removal of the transit bolts. The transit bolts should be stored for future use.

NOTE: Remove the transit bolts before using the machine for the first time. Faults occurring due to the machine being operated with transit bolts fitted are out of the scope of the warranty.

3.2 Adjusting the Feet / Adjusting Adjustable Stays

1. Do not install your machine on a surface (such as a carpet) that would prevent ventilation at the base.
   • To ensure silent and vibration-free operation of your machine, install it on a firm surface.
   • You can level your machine using the adjustable feet.
   • Loosen the plastic locking nut.

2. To increase the height of the machine, turn the feet clockwise. To decrease the height of the machine, turn the feet anticlockwise.
   • Once the machine is level, tighten the locking nuts by turning them clockwise.

3. Never insert cardboard, wood, or other similar materials under the machine to level it.
   • When cleaning the ground on which the machine is located, take care not to disturb the level of the machine.

3.3 Electrical Connection

• Your Washing Machine requires a 220240V, 50Hz mains supply.
• The main cord of your washing machine is equipped with an earthed plug. This plug should always be inserted into an earthed socket of 10 amps.
• If you do not have a suitable socket and fuse conforming with this, please ensure work is carried out by a qualified electrician.
• We do not take responsibility for damage that occurs due to the use of ungrounded equipment.

NOTE : Operating your machine with low voltage will cause the life cycle of your machine to be reduced and its performance to be restricted.

3.4 Water Inlet Hose Connection

1. Your machine may have either a single water inlet connection (cold) or a double water inlet connection (hot and cold) depending on the machine specifications. The white-capped hose should be connected to a cold water inlet and the red-capped hose to the hot water inlet (if applicable).
   • To prevent water leaks at the joints, either 1 or 2 nuts (depending on your machine’s specifications) are supplied in the packaging with the hose. Fit these nuts to the end(s) of the water inlet hose that connects to the water supply.

2. Connect new water inlet hoses to a ¾ ˝, threaded tap.
   • Connect the white-capped end of the water inlet hose to the white water inlet valve on the rear side of the machine and the red-capped end of the hose to the red water inlet valve (if applicable).
   • Hand tighten the connections. If in any doubt, consult a qualified plumber.
   • Water flow with the pressure of 0. 1-1 Mpa will allow your machine to operate at optimum efficiency (pressure of 0. 1 Mpa means that more than 8 liters of water per minute will flow through a fully opened tap).

3. Once you have made all of the connections, carefully turn the water supply on and check for leaks.

4. Ensure that the new water inlet hoses are not trapped, kinked, twisted, folded or crushed.
   • If your machine has a hot water inlet connection, the temperature of the hot water supply should not be higher than 70°C.

NOTE: Your Washing Machine must only be connected to your water supply using the supplied new fill hose. Old hoses must not be reused.

3.5 Water Discharge Connection

• Connect the water drain hose to a standpipe or to the outlet elbow of a household sink, using additional equipment.
• Never attempt to extend the water drain hose.
• Do not put the water drain hose from your machine into a container, bucket, or bathtub.
• Make sure that the water drain hose is not bent, buckled, crushed, or extended.
• The water drain hose must be installed at a maximum height of 100 cm from the ground.

CONTROL PANEL OVERVIEW

1. Detergent Drawer
2. Electronic Display and AdditionalFunctions
3. Program Dial

4.1 Detergent Drawer

1. Liquid Detergent Attachments
2. Main Wash Detergent Compartment
3.  Softener Compartment
4. Pre-Wash Detergent Compartment
5. Powder Detergent Levels
6. Powder Detergent Scoop (*)

(*) Specifications may vary depending on the machine purchased.

4.2 Sections
Main wash detergent compartment:

This compartment is for liquid or powder detergents or limescale remover. The fluid detergent level plate will be supplied inside your machine. (*)
Fabric conditioner, starch, detergent compartment:

This compartment is for softeners, conditioners or starch. Follow the instructions on the packaging. If softeners leave residue after use, try diluting them or using a liquid softener.
Pre-wash detergent compartment:

This compartment should be used only when the pre-wash feature is selected. We recommend that the pre-wash feature is used only for very dirty laundry.
(*) Specifications may vary depending on the machine purchased.

4.3 Program Dial

• To select the desired program, turn the program dial either clockwise or anti-clockwise until the marker on the program dial points to the chosen program.
• Make sure that the program dial is set exactly to the program you want.

4.4 Electronic Display

1. Water Temperature Adjustment Button
2. RPM Speed Adjustment Button
3. Delayed Start Additional Function
4. Additional Function Button
5. Start/Pause Button| 6. Additional Function Symbol
7. Function Display
8. Wash Level Display
9. Electronic Display
10. Digital Display
---|---

The display panel shows the washing delay timer (if set), temperature selection, any additional functions you have selected, and the current stage of the program you are
running on your machine ( prewash/ wash, rinsing, spinning).

The display panel shows “End” when the selected program is complete. The display panel also indicates if a fault has occurred with your machine.

 USING YOUR WASHING MACHINE

5.1 Preparing Your Laundry

1. Follow the instructions given in the care labels on the clothing.
   • Separate your laundry according to type (cotton, synthetic, sensitive, wool, etc. ), washing temperature (cold, 30°, 40°, 60°, 90°) and the degree of dirtiness
   (slightly stained, stained, highly stained).

2. Never wash colored and white laundry together.
   • Dark textiles may contain excess dye and should be washed separately several times.

3. Ensure that there are no metallic materials on your laundry or in the pockets; if so, remove them.
   CAUTION : Any malfunctions which occur due to foreign materials damaging your machine are not covered by the warranty.

4. Close zips and fasten any hooks and eyes.

5.  Remove the metallic or plastic hooks of curtains or place them in a washing net or bag.

6. Reverse textiles such as pants, knitwear, t-shirts, and sweatshirts.

7. Wash socks, handkerchiefs, and other small items in a washing net.

5.2 Putting Laundry in the Machine

• Open the door of your machine.
• Spread your laundry evenly in the machine.
  NOTE: Take care not to exceed the maximum load of the drum as this will give poor wash results and cause creasing.Refer to the washing program tables for
  information on load capacities.
  The following table shows the approximate weights of typical laundry items:

• Load each item of laundry separately.

• Check that no items of laundry are trapped between the rubber seal and the door.

• Gently push the door until it clicks shut.

• Make sure the door is fully closed, otherwise the program will not start.

5.3 Adding Detergent to the Machine
The amount of detergent you will need to put in your machine will depend on the following criteria:

• If your clothes are only slightly soiled, do not pre-wash. Put a small amount of detergent (as specified by the manufacturer) into compartment II of thedetergent drawer.
• If your clothes are excessively soiled, select a program with pre-wash and put ¼ of the detergent to be used into compartment I of the detergent drawer and the rest in compartment II.
• Use detergents produced for automatic washing machines. Follow the manufacturer’s instructions on the amount of detergent to use.
• In areas of hard water, more detergent will be required.
• The amount of detergent required will increase with higher washing loads.
• Put softener in the middle compartment of the detergent drawer. Do not exceed the MAX level.
• Thick softeners may cause clogging of the drawer and should be diluted.
• It is possible to use fluid detergents in all programs without a pre-wash. To do this, slide the fluid detergent level plate () into the guides in compartment II of the detergent drawer. Use the lines on the plate as a guide to filling the drawer to the required level.
  () Specifications may vary depending on the machine purchased.

5.4 Operating Your Machine

1.  Plug your machine into the main supply.
2. Turn on the water supply.
   • Open the machine door.
   • Evenly spread your laundry in the machine.
   • Gently push the door until it clicks shut.

5.5 Selecting a Programme
Use the program tables to select the most appropriate program for your laundry.
5.6 Half-Load Detection System

Your machine features a half-load detection system.
If you put less than half the maximum load of laundry into your machine it will automatically set the half-load function, regardless of the program you selected.
This means that the selected program will take less time to complete and will use less water and energy.
(*) Model Dependant

5.7 Additional Functions

Before starting a program, you can select an additional function.

• Press the button on the Control Panel below the symbol of the additional function you wish to select.
• If the symbol of the additional function flashes continuously, the function has been activated.
• If the symbol of the additional function blinks, the function has not been selected.

Reason for non-activation:

• The additional function is not compatible with the selected washing program.
• Your machine has progressed too far into the program for the additional function to be possible.
• The additional function you have chosen is not compatible with another additional function you have already selected.

1. Temperature Selection Use the washing water temperature adjustment button to alter the automatically programmed washing water temperature.
   When you select a program the maximum temperature for that program is automatically selected. To adjust the temperature, press the water temperature adjustment button until the desired temperature is displayed on the digital display.
   You can gradually decrease the washing water temperature between the maximum washing water temperature of the selected program and cold washing (–) selections
   by pressing the temperature adjustment button. If you have skipped the washing water temperature you wanted, keep pressing the washing water temperature adjustment button until the desired temperature is displayed again.

2. Spin Speed Selection
   When you select a program, the maximum spin speed is automatically selected.
   To adjust the spin speed between the maximum spin speed and the cancel spinning option (–), press the Spin speed button until the desired speed is displayed.
   If you have skipped the spin speed you want to set, keep pressing the spin speed adjustment button until the desired spin speed is displayed again.

3. Delay Timer • Press the Delay button once.
   • “1 h” will appear on the display.
   • The symbol will flash on the electronic display.
   • Press the Delay button until the desired delayed time appears on the display.
   • If you have skipped the delay time you wanted to set, keep pressing the Delay button until the desired delay time is displayed again.
   • For the delay timer function to work, you must press the Start/Pause button.
   • To activate the time delay, press the “Start/ Pause” button.
   • To cancel the time delay once it has been set, press the Delay button once. The symbol will no longer flash on the electronic display.
   • In order to add/remove laundry while the delay timer function is working, you must press the Start/Pause button. After adding/removing laundry, you must press the Start/Pause button again to activate the delay timer function.

4. *Anti-Allergic ()** You can add an additional rinse operation to your laundry using this additional function. Your machine will carry out all rinsing steps with hot water. We recommend this setting for laundry worn on delicate skin, baby clothes, and underwear.
   To select this function, press the Antiallergic button when the symbol is displayed.

5. *Easy Ironing()* Using this function will result in your laundry being less wrinkled at the end of the selected washing programme.
   To select this function, press the Easy ironing button when the symbol is displayed.6. Pre-Wash()

6. *Pre-Wash()** This additional function allows you to give heavily soiled laundry a pre-wash before the main washing program takes place. When using this function, put detergent in
   the front washing compartment of the detergent drawer. To select this function, press the Pre-wash button when the symbol is displayed.

7. Extra Rinse(*)**** You can add an additional rinse operation to the end of the selected wash program using this additional function.
   To select this function, press the Extra rinse button when the symbol is displayed.

8. *Rapid Wash() You can wash your laundry in a shorter time, using less energy and water by selecting this additional function.
   We recommend that you only use this option if you are washing less than half the maximum dry load for the selected program.
   To select this function, press the Rapid wash button when the symbol is displayed.
   NOTE:* If you put less than half the maximum load of laundry into your machine the half-load function will be automatically set, regardless of the program you selected. This means that the selected program will take less time to complete and will use less water and energy. When your machine detects half load, the symbol is displayed automatically.
   () Model Dependant

9. Start/Pause Button To start the selected program, press the Start/Pause button.
   If you switch your machine to standby mode, the Start/Pause indicator on the electronic display will blink.

10. Child Lock The Child Lock function allows you to lock the buttons so that the wash cycle you have chosen cannot be changed unintentionally.
    To activate the child lock, press and hold buttons 3 and 4 simultaneously for at least 3 seconds. ‘’CL’’ will flash on the electronic display for 2 seconds when the child lock is
    activated.
    If any button is pressed or the selected program is changed by the program dial while the child lock is active, the “CL” symbol will flash on the electronic display for 2 seconds.
    If the child lock function is active and a program is running, when the program dial is turned to the CANCEL position and another program is selected the previously selected program continues from where it was left. To deactivate the child lock, press and hold buttons 3 and 4 simultaneously for at least 3 seconds until the “CL” symbol on the electronic display disappears.

5.8 Cancelling the Programme
To cancel a running program at any time:

1. Turn the program dial to the “STOP” position.
2. Your machine will stop the washing operation and the program will be canceled.
3. Turn the program dial to any other program to drain the machine.
4. Your machine will perform the necessary draining operation and cancel the program.
   You can now select and run a new program.

5.9 Programme End

Your machine will stop by itself as soon as the program you have selected finishes.

• “END” will flash on the electronic display.
• You can open the machine’s door and remove the laundry.
• Leave the door of your machine open to allow the inner part of your machine to dry.
• Switch the program dial to the STOP position.
• Unplug your machine.
• Turn the water tap off.

PROGRAMME TABLE

Program| Washing
temperature (“C)| Maximum dry
laundry amount
(kg)| Detergent
compartment| Program
duration (Min.)| Laundry type / Descriptions
---|---|---|---|---|---
COTTON 90°C| 90| 8.0| 2| 187| Very dirty, cotton and flax textiles. (Underwear,
linen, tablecloth, towel (maximum 4.0 kg),
bedclothes, etc.)
COTTON Pre-Wash| 60°| 8,0| 1&2| 165| Dirty cotton and flax textiles. (Underwear, linen,
tablecloth, towel (maximum 4,0 kg), bedclothes,
etc.)
COTTON 60°C| 60°| 8.0| 2| 215| Dirty cotton and flax textiles. (Underwear, linen,
tablecloth, towel (maximum 4,0 kg), bedclothes,
etc.)
COTTON 20°C| 20°| 4,0| 2| 95| Less dirty, cotton and linen textiles. (Underwear,
bedsheet, tablecloth, towel (max. 2,0 kg) bedclothes,
etc.)
ECO 40-60| 40°| 3,5| 2| 215| Dirty cotton and flax textiles. (Underwear, linen,
tablecloth, towel (maximum 2,0 kg), bedclothes,
etc.)
WOOL| 30°| 2,5| 2| 43| Woolen laundries with machine wash labels.
RINSE| –| 8,0| –| 42| Provides an additional rinse to any type of laundry
after the washing cycle.
ALLERGY SAFE| 60°| 4,0| 2| 226| Baby laundry
SPIN| –| 8,0| | 17| Provides an additional spin cycle to any type of
laundry after the washing cycle.
HAND WASH/
DELICATE| 30°| 2,5| 2| 90| Laundry recommended for hand wash or sensitive
laundry.
EASY CARE/
SPORTSWEAR| 40°| 3,5| 2| 110| Very dirty or synthetic-mixed textiles. (Nylon socks,
shirts, blouses, synthetic-including trousers, etc.)
MIX| 30°| 3,5| 2| 81| Dirty cotton, synthetics, colour, and flax textiles can
be washed together.
BLOUSES / SHIRTS| 60°| 4,0| 2| 112| Dirty cotton, synthetic and synthetic- mixed shirts
and blouses can be washed together.
(*) FAST 60′.| 60°| 4,0| 2| 60| Dirty, cotton, colored and linen textiles washed at
60°C in 60 minutes.
(“) RAPID 15′| 30°| 2,0| 2| 15| Lightly soiled, cotton, colored, and linen textiles.

NOTE: PROGRAMME DURATION MAY CHANGE ACCORDING TO THE AMOUNT OF LAUNDRY, TAP WATER, AMBIENT TEMPERATURE, AND SELECTED ADDITIONAL FUNCTIONS.
(*) If your machine includes the rapid washing additional function and you put 2 kg or less of laundry into your machine, your machine will automatically wash the laundry for 30 minutes.
(**) Due to the short washing time of this program, we recommend that less detergent is used. The program may last longer than 15 minutes if your machine detects an uneven load. You can open the door of your machine 2 minutes after the completion of a washing operation. (The 2-minute period is not included in the program duration).
According to regulations 1015/2010 and 1061/2010, program 3 with temperature selections is the ‘Standard 60°C cotton program’ and the ‘Standard 40°C cotton program’.
The Eco 40-60 program is able to clean normally soiled cotton laundry declared to be washable at 40°C or 60°C, together in the same cycle, and this program is used to assess the compliance with the EU ecodesign legislation.

• The most efficient programs in terms of energy consumption are generally those that perform at lower temperatures and longer duration.

• Loading the household washing machine up to the capacity indicated by the manufacturer for the respective programs will contribute to energy and water savings.

• Program duration, energy consumption, and water consumption values may vary according to wash load weight and type, selected extra functions, tap water, and ambient temperature.

• It’s recommended to use liquid detergent for the washing programs at low temperatures. The amount of detergent to be used may vary depending on the amount of laundry and the level of dirtiness of the laundry. Please follow the detergent manufacturers’ recommendations for the amount of detergent to be used.

• The noise and remaining moisture content are influenced by the spinning speed. The higher spinning speed in the spinning phase, the higher noise and the lower remaining
  moisture content.

• You can access the product database where the model information is stored by reading the QR code on the energy label.

Program Name| Rated
Capacity kg| Energy. Consumption
kWh/cycle| Program Duration
Hours: Minutes| Water
Consumption
Liters/Cycle| max.
Temperature °C| Remaining
Moisture Content % 1400 Rpm
---|---|---|---|---|---|---
| | Rated
Capacity| 1/2 Load| 1/4 Load| Rated
Capacity| 1/2 Load| 1/4 Load| Rated
Capacity| 1/2 Load| 1/4 Load| Rated
Capacity| Pool Z11.| 1/4 Load| Rated
Capacity| 1/2 Load| 1/4 Load
COTTON
90°C| 8| 2,33| | | 3:07| | | 71| | | 81| | | 53%| |
COTTON
60°C| 8| 1,01| | | 3:35| | | 52| | | 49| | | 53%| |
ECO
40-60| 8| 0,99| 0,50| 0,33| 3:35| 2:48| 2:30| 52| | 38| 41| 32| 25| 53%| 53%| 53%
EASY CARE/
SPORTSWEAR| 3,5| 0,62| | | 1:50| | | 48| | | 42| | | 53%| |
 FAST
60’.| 4| 1,02| | | 1:00| | | | | | 58| | | 53%| |
COTTON
20°C| 4| 0,21| | | 1:35| | | 43| | | 20| | | 53%| |

6.1 Important Information

• Use detergents, softeners, and other additives suitable for automatic washing machines only. Excessive foam has occurred and an automatic foam absorption system has been activated due to too much detergent usage.

• We recommend that periodic cleaning for washing machine every 2 months. For periodic cleaning please use Drum Clean program. If your machine does not have
  Drum Clean program, use Cottons-90 program. When required, use limescale removers manufactured specifically for washing machines only.

• Never force the door open when your Washing Machine is running. You can open the door of your machine 2 minutes after the completion of a washing operation. *

• Never force the door open when your Washing Machine is running. The door will open immediately after the washing cycle has ended. *

• The installation and repairing procedures should always be carried out by the Authorised Service Agent in order to avoid possible risks. The manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons.
  (*) Specifications may vary depending on the machine purchased.

CLEANING AND MAINTENANCE

7.1 Warning

Turn your mains power supply off and remove the plug from the socket before carrying out maintenance and cleaning of your machine.
Turn off the water supply before starting maintenance and cleaning your machine.
CAUTION: Do not use solvents, abrasive cleaners, glass cleaners, or all- purpose cleaning agents to clean your Washing Machine. They may damage the plastic surfaces and other components with the chemicals they contain.

7.2 Water Inlet Filters
Water inlet filters prevent dirt and foreign materials from entering your machine. We recommend that these filters are cleaned when your machine is unable to receive sufficient water, although your water supply is on and the tap is open. We recommend that you clean your water inlet filters every 2 months.

• Unscrew the water inlet hose(s) from the Washing Machine.
• To remove the water inlet filter from the water inlet valve, use a pair of long-nosed pliers to gently pull on the plastic bar in the filter.
• A second water inlet filter is located in the tap end of the water inlet hose. To remove the second water inlet filter, use a pair of long-nosed pliers to gently pull on the plastic bar in the filter.
• Clean the filter thoroughly with a soft brush and wash with soapy water and rinse thoroughly. Re-insert the filter by gently pushing it back into place.

CAUTION: The filters at the water inlet valve may become clogged due to water quality or lack of required maintenance and may break down.
This may cause a water leak. Any such breakdowns are out of the scope of the warranty.

7.3 Pump Filter

The pump filter system in your Washing Machine prolongs the life of the pump by preventing lint from entering your machine.
We recommend that you clean the pump filter every 2 months.
The pump filter is located behind the cover on the front lower right corner.
To clean the pump filter:

1. You may use the washing powder spade(*) supplied with your machine or liquid detergent level plate to open the pump cover.

2. Lodge the end of the powder spade or liquid detergent level plate in the opening of the cover and gently press backward. The cover will open.
   • Before opening the filter cover, place a container under the filter cover to collect any water left in the machine.
   • Loosen the filter by turning anticlockwise and remove by pulling. Wait for the water to drain.
   NOTE : Depending on the amount of water inside the machine, you may have to empty the water collection container a few times.

3.  Remove any foreign materials from the filter with a soft brush.

4. After cleaning, re-fit the filter by inserting it and turning clockwise.

5. When closing the pump cover, ensure that the mountings inside the cover meet the holes on the front panel side.

6. Close the filter cover.

WARNING: The water in the pump may be hot, wait until it has cooled down before carrying out any cleaning or maintenance.
(*) Specifications may vary depending on the machine purchased.
7.4 Detergent Drawer
The use of detergent may cause residual build-up in the detergent drawer over time.
We recommend that you remove the drawer every 2 months to clean the accumulated residue.

To remove the detergent drawer:

• Pull the drawer forwards until it is fully extended.
• Gently press down on the drawer (as shown below) and pull the drawer from its housing.
• Clean the drawer with water and a soft brush.
• If there is any residue in the drawer housing, remove it with a soft brush. Take care to prevent any residue from dropping into the machine.
• Dry the drawer thoroughly and slide it back into the housing.
  Do not wash your detergent drawer in the dishwasher.

FLUSH STOPPER / BODY / DRUM

1. Flush stopper
   Remove the detergent drawer and disassemble the flush stopper. Clean thoroughly to completely remove any softener residue. Refit the flush stopper after cleaning and check that it is seated properly.

2. Body
   Use a mild, non-abrasive cleaning agent, or soap and water, to clean the external casing. Wipe dry with a soft cloth.

3. Drum
   Do not leave metallic objects such as needles, paper clips, coins, etc. in your machine. These objects lead to the formation of rust stains in the drum. To clean such rust stains, use a non-chlorine cleaning agent and follow the instructions of the manufacturer of the cleaning agent. Never use wire wool or similarly hard objects for cleaning rust stains.

TROUBLESHOOTING

Repair of your machine should be carried out by an authorized service company. If your machine requires repair or if you cannot solve an issue with the information provided
below, then you should:

• Unplug your machine from the main power supply.
• Turn off the water supply.

The machine door is not
completely closed.| Close the machine door.
Your machine does not
intake water.| The water tap is turned off.| Turn tap on.
The water inlet hose may be twisted.| Check water inlet hose and untwist.
The water inlet hose clogged.| Clean water inlet hose filters. (1
Inlet filter clogged.| Clean the inlet filters. (*)
The machine door is not
completely closed.| Close the machine door.
Your machine does not
discharge water.| Drain hose clogged or twisted.| Check the drain hose, then either clean or
untwist.
The pump filter is clogged.| Clean the pump filter. (1
The laundry is too tightly packed
together in the drum.| Spread your laundry in the machine evenly.
Your machine vibrates| The feet have not been adjusted.| Adjust the feet. (—)
Transit bolts fitted for
transportation has not been
removed.| Remove the transit bolts from the machine. (“)
Small load in the drum.| This will not prevent the operation of your machine.
Your machine is overloaded with
laundry or laundry is unevenly
spread.| Do not overload the drum. Spread laundry evenly
in the drum.
Your machine rests on a hard
surface.| Do not set up your Washing Machine on a hard
surface.
Excessive foam is formed in
the detergent drawer| An excessive amount of detergent
used| Press the Start/Pause button. To stop the foam.
dilute one tablespoon of softener into 1/2 litre of
water and pour into the detergent drawer. Press
the Start/Pause button after 5-10 mins.
The wrong detergent used| Only use detergents produced for automatic
Washing Machines.
Unsatisfactory washing
result.| Your washing is too dirty for the
program selected.| Use the information in the program tables to
select the most appropriate program.
Amount of detergent used
insufficient.| Use the amount of detergent as instructed on the
packaging.
There is too much laundry in your
machine.| Check that the maximum capacity for the
the selected program has not been exceeded.
Unsatisfactory washing
result.| Hard water.| Increase the amount of detergent following the
manufacturer’s instructions.
---|---|---
Your laundry is too tightly packed
together in the drum.| Check that your laundry is spread out.
As soon as the machine is
loaded with water, water
discharges.| The end of water drain hose is too
low for the machine.| Check that the drain hose is at a suitable height.
(.1 .
No water appears in the
drum during washing.| No fault. Water is in the unseen
part of the drum.|
Laundry has
detergent residue.| Non-dissolving particles of some
detergents may appear on your
laundry as white spots.| Perform an extra rinse, or dean your laundry with
a brush after it dries.
Grey spots appear on the
laundry.| There is untreated oil, cream or
ointment on your laundry.| Use the amount of detergent as instructed on the
packaging in the next wash.
The spin cycle does not take
place or takes place later
than expected.| No-fault. The Unbalanced load
control system has been activated.| The Unbalanced load control system will try to
spread your laundry. The spinning cycle will begin
once your laundry is spread. Load the drum
evenly for the next wash.

AUTOMATIC FAULT WARNINGS AND WHAT TO DO

Your Washing Machine is equipped with a built-in fault detection system, indicated by a combination of flashing wash operation lights. The most common failure codes are shown below.

If your machine persists to indicate a fault, turn off
your machine, unplug it and contact the nearest
authorized service agent immediately.
0.00E+00| The water pressure or the water level
inside the machine may be low.| Check the tap is fully turned on. Mains water
may. be cut-off. If the problem still continues, your
machine will stop after a while automatically. Unplug
the machine, turn off your tap and contact the
nearest authorized service agent.
0.00E+00| The pump is faulty or the pump filter is
the dogged or electrical connection of the
the pump is faulty.| Clean the pump filter. If the problem persists.
contact the nearest authorized service agent. (*)
0.00E+00| Your machine has an excessive amount of
water.| Your machine will discharge water by itself. Once
the water has drained, turn off your machine and
unplug it. Turn off the tap and contact the nearest
authorized service agent.

(*) See the chapter regarding maintenance and cleaning of your machine.

Service &
Support
Visit Our Website
52340000
sharphomeappliances.com

References

• sharphomeappliances.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>