CASSETTE 8541723849 Digital Photo Frame User Manual

CASSETTE 8541723849 Digital Photo Frame

Remote Control

| Power on/off
---|---
| Loudspeaker mute
| Photo slides with BGM
| One key into the calendar interface
| One-click play pictures
| One-click play music
| One-click play video
| Up/down/left/right cursor
| Confirm selection
| Volume addition and subtraction
| Fast forward and fast back in music

or video playing

****| Play the previous or the latter video

or track

| Play or pause
| One-click access to the system
settings interface
****| Return to the previous interface

Body button and interfaces

Machine start up

• The boot screen will be displayed after 2-3 seconds of power-on.
  

• A few seconds later, the system will automatically read the contents of the inserted U disk, inserted SD card or built-in TF card. If the boot-up auto-play video is preset, the video files in the corresponding memory will be automatically played at this time, and the default is to play the file name in order; if the boot-up auto-play picture is preset, the system will automatically play the picture.
  [Tip: For specific boot-up playback settings ,please refer to the description of the system settings module below.]

• When multiple memory cards (such as SD/MMC/SDHC card ,U disk ,etc) are inserted at the same time ,the system will read the last memory card first by default. It can also manually specify which memory card to read. At the main interface , it can specify the memory card read by the system by pressing the key of the remote controller.[tip: When the icon of the memory card is bright, it indicates that the memory card has been inserted into the machine. If it is grey, it means that it is not available and cannot be specified.]

Browse pictures

• Press the button in the remote control directly (or in the main interface of the system, select the image icon, press the button), and automatically play the picture in memory in the form of slides.
•  During the period, you can manually switch between the last and the next picture by remote control and but ton. You can also press button to suspend the slide playing (if it is suspended, press this button to restore the slide mode to play), then press button to enlarge the picture (maximum support x10), and press to rotate the picture 360 degrees. If you need other settings of the picture, you can press long , then enter the brief settings of the picture, as shown in the following figure, press to exit the settings interface.
  

automatically
Delete| Delete the current photo
Information| You can view the name, resolution, size and date of the picture

• At this time , if you need to view all the pictures, you can press to exit the slide auto play mode, enter the following picture file browsing, press to quickly browse the pictures, press to view the pictures, and enter the slide auto play mode at the same time.
  

•  When the picture slide mode plays automatically, if there are audio files in memory, the system will play pictures automatically with background music, and also can quickly enter the playing of music pictures according to in the remote control.

• Picture support formats: JPEG 、 BMP 、 PNG 、 GIF(less than 2000*2000 pixels).

Play music

• Press the button in the remote control directly ( or in the main interface of the system, select the mus the system, select the music icon, press the ic icon, press the button) to browse the audio file button) to browse the audio file and play the first audio file automatically by default. and play the first audio file automatically by default.

• During the period, you can select audio files by remote control During the period, you can select audio files by remote control and and , , then press then press to play, then press to play, then press again to pause. If you don again to pause. If you don’t want to t want to always press ways press key to start playing, you can press key to start playing, you can press and and to start to start playing the next and last songs directly, and you can also press playing the next and last songs directly, and you can also press to parse to parse music playing at any time (if it is paused, press the key to restore music playing), music playing at any time (if it is paused, press the key to restore music playing), if you need to start playing if you need to start playing from one of the music nodes. The volume can be from one of the music nodes. The volume can be adjusted by adjusted by and and or or and and , and the volume can be silenced , and the volume can be silenced immediately by immediately by ..
  

• If you need to set the music playing cycle mode, in the music playing interface, you can press you can press for a long time, enter the for a long time, enter the simple music settings, press  music settings, press to exit the settings interface.to exit the settings interface.
  Select EQ| Choosing the Equilibrium Effect of Music Playing
  ---|---
  Play Mode| Setting up the Circulating Play Mode of Music
  EQ Settings| The specific values of EQ can also be adjusted separately

Tip: The picture slide mentioned above will play automatically. After the above music playing settings are successful, the background music playing will take effect.

• Audio Support Format MP3 、 PCM 、 AAC 、 WMA 、 OGG 、 APE 、 AC3 、 WAV 、 M4A 、 FLAC…etc.

Play the video

• Press the button in the remote control directly (or in the main interface of the system, select the video icon, press ), and you can browse the video files.

• During this period, you can select video files by remote control and , then press to play, then press again to pause, you can also press A to pause video playback (if paused, press this key will restore video playback); during this period, you can press and to switch video playback, or long press and fast forward and fast backward playback video , if you are accustomed to using direction keys to operate, then you can. Press and to switch video playback, long press and to fast forward and fast backward video; also press and or and sum to adjust the volume, press can be immediately muted.
  

• If you need to set the video cycle mode, you can press for a long time in the video playback interface, enter the simple settings of music, press to exit the settings interface.
  Photo Random Slide show| Setting the Video Loop Play Mode
  ---|---
  Screen Size| Setting Full Screen, Original Size or Equal
  Scale Display
  Delete| Delete the currently playing video file
  Track| System default track
  Subtitle| You can choose whether to display the
  | captions in the video
  Information| You can view the name, resolution, frame rate, size and other information of the video

• Video Support Format RM 、 RMV 、 RMVB 、 AVI 、 MOV 、 MPG 、 MPEG 、 FLV 、 F4V 、 VOB 、 MP4 、 M4V 、 MKV 、 WMV…etc.

Clock calendar

• Press the button in the remote control directly (or in the main interface of the system, select the calendar icon, press ), and enter the display interface of the calendar.
• can be used to view the year, month and day. At the same time, pictures in memory will be automatically played on the left side of the calendar. The order of circular playback is related to the order of picture settings. If an alarm clock is set in the system, the alarm clock information will be displayed on the calendar interface.
  
  Tip: If you need to set the current time and alarm clock, you can set it in the Calendar Settings section of the system settings. See the system settings instructions below.

File manage

• In the main interface of the system, select the icon of file management and press to view the list of files in current memory.
•  You can quickly browse and find information about a file and its size according to . You can choose to copy or delete the file according to press the button
  

System Settings

• Press the button in the remote controller directly (or in the main interface of the system, select the icon set, press ), then enter the system settings interface, then press to select different settings module, select the corresponding module, and press to enter the settings of the module.
  

• Photo Setup Detailed settings can be made for display ratio, whether to play background music, time interval of slides and special effects, repetition mode, etc.

• Calendar Setup You can adjust the date, time, time format and alar m clock settings.

• Video Setup Video display ratio and cycle mode can be set.

• Music Setup Mainly set up the cycle mode of music.

•  System Setup

•  Language choices can be made as needed;

  • The brightness, gray level and contrast of the system display can be adjusted slightly;
  • Timing switch can be set, and then the effective time period can be carried out through the power supply frequency;
  • You can adjust the boot mode to set the default boot play module.;
  • Finally, if there is a human motion sensing module, it can automatically enter sleep by turning on the motion sensor, and then setting the sleep time, that is, how long does the human motion system not feel it.

Tip: Press to the main interface to save the settings of the above modules.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>