THRUSTMASTER T248 Racing Wheel and Magnetic Pedal Instruction Manual
- June 5, 2024
- THRUSTMASTER
Table of Contents
PC Xbox One™ Xbox Series X|S™
Instruction Manual
Manual firmware update procedure
(Windows 7 / 8 / 8.1 / 10)
T248 Racing Wheel and Magnetic Pedal
-
Install the drivers
“PC – DRIVERS FORCE FEEDBACK: https://support.thrustmaster.com/en/product /t248x-en/
During this procedure:
– DO NOT CONNECT the T248 wheel to your PC before being prompted to do so.
– The wheel must be connected directly to the computer’s USB port. We recommend that you do not use a USB hub for this procedure.
– DO NOT CLICK in any Windows dialog boxes that may appear during the update. -
Restart the computer.
-
a) On Windows 7
In the “Start > All Programs > Thrustmaster > FFB Racing wheel > Control Panel” menu, verify that your wheel appears under the name “Thrustmaster Advanced Mode Racer”.
3b) On Windows 8 / 8.1 / 10
From the Start menu, start typing the words Control Panel. This will bring up the Search function, giving you access to the Game Controller Control Panel.
It is also available under Apps >
Thrustmaster: Your wheel should appear under the name “Thrustmaster Advanced
Mode Racer”.
-
Your wheel’s firmware version is displayed in the upper right-hand corner of the Control
Panel tabs. Firmware: 2.00 is currently the latest version.
-
If the firmware version is earlier than 2.00:
a) On Windows 7
In the “Start > All Programs > Thrustmaster > FFB Racing wheel” menu, click on “Firmware Update”.
b) On Windows 8 / 8.1 / 10
From the Start menu, start typing the words Firmware Update. This will bring up the Search function, giving you access to the Firmware application:
It is also available under Apps >
Thrustmaster: -
– The T248 device is listed in the “Device” section.
The version of the firmware currently found in the device is displayed.
– The “Firmware” section displays information regarding the version of the firmware that will be applied to the device.
-
When you are ready to continue, click OK.
The firmware update procedure begins (the update progress is displayed onscreen).
IMPORTANT: DO NOT UNPLUG your wheel from the USB port, and DO NOT DISCONNECT the wheel’s power supply during the firmware update procedure!
The update program will inform you whether the firmware has been successfully
updated.
Disconnect now your T248, then reconnect it
for validation.
-
Click OK to return to the update program’s main window, and then click on to exit the program.
If the firmware update procedure has failed or displays an error message, please contact
Thrustmaster technical support, who will guide you through the entire process to follow. -
Once the firmware has been successfully updated, verify that the wheel is functioning properly in the Control Panel
Congratulations! You are now ready to play!
Documents / Resources
|
THRUSTMASTER T248 Racing Wheel and Magnetic
Pedal
[pdf] Instruction Manual
T248, Racing Wheel and Magnetic Pedal, T248 Racing Wheel and Magnetic Pedal
---|---