MAXTID Door Draft Stopper Instructions

June 3, 2024
MAXTID

Door Draft Stopper
Instruction Manual

If the product is accidentally damaged during shipping or is not suitable for your door, please contact us to solve the problem for you.

HOW TO USE?

  • MAKE SURE THE DOOR IS CLEAN AND NO OIL, GREASE OR WATER
  • TIPS: USE HAIRDRYER(HEAT) TO SOFTEN UP THE FOAM BAR WHEN NOT EASY TO INSERT

Press the clear strip built into the cover to one side so that the foam can be inserted better

  1. Place the draft stopper cover as shown above

  2. Insert the foam tube into**** the slot on the plastic sheet by rolling inward

  3. Place the adhesive strip** hook on the loop of draft stopper
    **

  4. Mesure size
    das

  5. Cut off extra parts and pell off white protective film

  6. To enhance stickiness,add  LOW hot air (hair dryer) to the adhesive for 30-40 sec
    MAXTID Door Draft Stopper - Figure 6

  7. Place tubes on the floor firmly and hold side away adhesive away from the door. Make sure there is no gap between draft stopper and floor. Complete!

CONTACT US: Support@maxtid.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals