Marshall WILLEN Portable Bluetooth Loudspeaker User Manual
- June 5, 2024
- Marshall
Table of Contents
Marshall WILLEN Portable Bluetooth Loudspeaker
DEVICE LAYOUT
GENERAL
-
USB-C POWER INPUT
Charge the speaker by plugging it into a USB power source. -
FASTENING STRAP
Unhook the lower-right side of the strap by stretching it gently. -
BLUETOOTH BUTTON
Push and hold the Bluetooth® button until the LED turns to a slow red pulse to start pairing mode. -
MICROPHONE
The microphone lets you use Willen as a speakerphone. While in a call, push the Bluetooth button to toggle between using Willen for the call and your phone. -
BATTERY INDICATOR
The 5 segment Battery indicator shows the battery charge with a steady light and a rising animation indicates charging. -
CONTROL KNOB
-
Push and hold for 2 seconds to turn on/off
-
Push once to play/pause
-
Push right/left to skip forward/back
-
Hold right/left to fast forward/rewind
-
Hold upwards/downwards to adjust the volume
-
Push once to answer or end a call
-
Push twice to reject a call
INSTRUCTIONS
BLUETOOTH PAIRING
- Push and hold the control knob until the speaker turns on.
- Push and hold the Bluetooth button until the LED turns to a slow red pulse.
- Select WILLEN from your audio device’s Bluetooth list.
PERFORMING A FACTORY RESET
A factory reset will return the speaker to its original settings, excluding
any firmware updates.
Note: This will delete all user settings and the speaker will need to be set up again.
- Ensure that the speaker is on.
- Push and hold the Bluetooth button for 7 seconds. All indicators turn off and the speaker restarts.
- Remove WILLEN from your audio device’s Bluetooth list before pairing again.
MARSHALL BLUETOOTH APP
Download the Marshall Bluetooth app to get the most out of your speaker and
keep it up to date with the latest software.
STACK MODE
Connect two or more Willen speakers in a Stack session for a bigger sound. Play anything on the main speaker and all speakers in the session will play in sync. You can adjust the volume on any individual speaker for the perfect balance.
-
MAIN SPEAKER
Triple press the Bluetooth button to start or end a Stack session. The LED starts to blink until any other speaker joins the session. -
ADDITIONAL SPEAKER
Double press the Bluetooth button on any speaker you want to add to the session. The LED starts to blink until the speaker has joined a session. While in a session, the speaker will disconnect from any previously connected audio device and will try to reconnect after leaving the session. To remove a speaker from the session, double press the Bluetooth button on that speaker.
TROUBLESHOOTING
PROBLEM CAUSE ACTION
The speaker does not turn on| The battery has no charge| Plug the
speaker into a USB power source to charge it
Cannot connect or pair with a
Bluetooth device
| Bluetooth is not enabled on your device (smartphone, tablet, computer)|
Activate Bluetooth on your audio device
The speaker is not turned on| Push and hold the control knob for
2 seconds to turn on the speaker before setting it in pairing mode
Cannot play in Stack mode| The playback device is not connected to
the main speaker| Make sure that your playback device (phone or computer) is
paired with the main speaker
Bluetooth connection drops out| The Bluetooth devices are too
far apart, or the connection is affected due
to obstacles
| Move the devices closer to each other so that they are unobstructed by obstacles such as walls or doors