BAUHN AFWGPS-0722 Smart Watch with GPS User Guide

June 5, 2024
BAUHN

BAUHN-AFWGPS-0722-Smart-Watch-with-GPS-logo

BAUHN AFWGPS-0722 Smart Watch with GPS

Parts of the watch

BAUHN-AFWGPS-0722-Smart-Watch-with-GPS-
FIG-1

  1. Touch screen
  2. Power button
  3. Side button
  4. Charging points
  5. Sensor

First Time Use

Charge your watch before using it for the first time. You will need to charge it for about 3.5 hours.

Charging steps:

  1. Place the watch on top of the dock with the charging points on the back of the watch aligned with the charging pins on the charging dock. It will snap into position once correctly aligned.
  2. Plug the USB charging dock into a USB charging adaptor (not included) or a USB port on your computer.
  3. Once fully charged (the battery icon is full), unplug the charging dock from the charger.

Turn on the Watch
Once the watch is fully charged, press and hold the power button for 5 seconds to turn on the watch. To turn off the watch, press and hold the power button for 5 seconds, select “Power Off” to confirm or select “Restart” to restart the watch.

Fundo Health App

Search for the FunDo Health app in the app store to download, or scan the QR code below for installation.

BAUHN-AFWGPS-0722-Smart-Watch-with-GPS-FIG-3

Google Play and the Google Play logo are trademarks of Google LLC. Apple, the Apple logo, iPhone, and iPad are trademarks of Apple Inc., registered in the U.S. and other countries and regions. App Store is a service mark of Apple Inc.

Connect to the App
Open the Fundo Health app on your smartphone. Once the app is open, follow Device > Add device and select the first “AFWGPS0722” from the list. The smartwatch will connect to the app. The “BLE” icon at the shortcut menu will light up green after successfully connecting to the Fundo Health app.

Disconnect from the App
Open the Fundo Health app. Select “Device” and tap “UNBIND DEVICE” to disconnect the watch. On iOS devices, you will also need to open the settings menu on your iPhone. Go to Bluetooth settings, tap on the “i” icon on the right side of “AFWGPS0722” and then tap ‘Forget This Device’ to finish disconnecting.

The FunDo Health app supports Android 5.0+ and iOS 11.0+ devices. The watch can only be paired with one device at a time. To pair to another device, please disconnect the currently paired device.

Turn On the Screen

To turn on the screen, press the power button or raise your arm if you’re wearing the watch.

NOTE:
You will need to turn on the “Raise hand” function on the FunDo Health app for the function to work.

Functions On the Home Screen

  • Swipe up to enter the main menu interface.
  • Press the power again button to return to the previous menu or exit the menu.
  • Press the side button to enter the sports menu interface.
  • Swipe right to enter the message notification interface.
  • Swipe left to enter the quick access menu interface, which displays step count, sleep data, heart rate, and GPS location. You can change the menu by selecting the interface option on the main menu.
  • Press and hold the watch face for 5 seconds to change the interface, swipe left/right to switch, and tap to confirm.
  • Swipe down to enter the shortcut menu (do not disturb mode, about, find phone, alarm clock, brightness).

Functions On Other Screens
Press the power button to return to the previous menu or exit the menu.

Applications

Sports
The watch has 9 sports modes: outdoor running, outdoor walking, outdoor cycling, climbing, badminton, table tennis, basketball, skipping rope, yoga. Once the desired sports mode is selected, set the calorie target and exercise time by tapping the “setting” icon. Tap the centre of the screen to directly enter the sports mode. You can also select “Decided Sports Mode” to enter the sports mode interface without setting a target. Swipe right to pause/end the sports mode.

GPS function:
The watch has a built-in GPS function allowing you to track your distance and other data. When outdoor running, outdoor walking, outdoor cycling or climbing mode is selected, the watch will automatically search for the GPS location and once successful, the screen will display “GPS Location”. Tap the centre of the screen to start the sport mode, or tap the centre of the screen to skip the GPS function (without GPS location). For indoor sport modes, tap “Click Start” on the screen to start.

NOTE:
Smartphones must have location settings turned on and connected to a mobile network. Swipe right to pause or end the sports mode. Tap the “Stop” icon to save the sports mode data. GPS searching time is subject to your location and GPS signal. It may take up to a few minutes. If you are inside a building or are underground, the function will not work.

Message
Tap on the message icon to view notifications and messages on the watch. It will display up to 8 messages. After pairing with the watch, on your smartphone, select “OK/allow” when asked about the notification function.

Heart Rate
Tap on the Heart Rate icon to measure your heart rate. You can view more detailed data on the FunDo Health app.

Blood Pressure
Tap on the blood pressure icon to measure your blood pressure. You can view more detailed data on the FunDo Health app.

Blood Oxygen (SPO2)
Tap on the Blood Oxygen icon to measure your blood oxygen levels. You can view more detailed data on the FunDo Health app.

NOTE:
For measurements of heart rate, blood pressure and blood oxygen functions, ensure the following:

  • The watch has good contact with your wrist.
  • Check that the sensor is clean and there is no dirt or debris covering it.
  • The results and measurements of heart rate, blood pressure and blood oxygen data cannot be used for medical reference and should be used as a guide only.

Alarm
Tap on the alarm icon to view your alarms. Tap “+” to add or modify the alarm setting. You can set the alarms on the FunDo Health app and sync it to your watch. You can set up to 5 alarms.

Weather
Tap on the weather icon to view the weather forecast (up to a 3-day forecast). You must be connected to the Fundo Health app.

Note:
The weather will only display when connected to the Fundo Health app. You must have an Internet/mobile connection for this function to work. Your phone location/GPS must also be turned on.
Timer
Tap on the timer icon to enter the timer function. Tap the default time or set a customised time. Tap the icon to start the timer. Tap the icon to pause or the X icon to stop the timer. Press the power button to exit.

Stopwatch
Tap on the Stopwatch icon to open the stopwatch function. Tap the icon to start the stopwatch. Tap the icon to pause. Press the power button to exit the interface.

Music
After your smartphone is connected to the watch and whilst your smartphone is playing music, select the Music icon to enter the music control interface to play/pause/switch songs.

NOTE:
This function only works for music and not video playback.

Find Phone
After your smartphone is connected to the Fundo Health app, tap “Find Phone” on the watch and your smartphone will ring. Press the power button to exit.

Remote Captur
Tap on the remote capture icon to use the watch as a camera remote for your smartphone. After your smartphone is connected to the watch, open the FunDo Health app and select Device > Take a picture. Go to camera mode and tap the icon on the watch screen to remotely take a photo.

GPS LocationGPS Location
Swipe left on the home screen and select the GPS function to view the current latitude and longitude of your current location. If you are inside a building or underground, this function will not work. Press the power button to exit.

NOTE:
GPS searching time is subject to your location and GPS signal. It may take up to a few minutes. If you are inside a building or are underground, the function will not work.

Sleep Monitor
Swipe left from the home screen to view the sleep monitor data. After synchronising with the FunDo Health app, you can view more detailed records on your smart phone.

Menu Management
Tap the icon to add or delete the menu options of the quick access menu.

Brightness
Swipe down from the home screen and tap the brightness icon repeatedly to change the brightness.

Factory Reset
Tap to restore all settings to factory default.

Sedentary Reminder
Select the Sedentary reminder and set it to on/off. This will notify you to be active. You can also set the reminder on the FunDo Health app.

Water Drinking Reminder
On the FunDo Health app, select “Device” to set the water drinking reminder on/off. You can set the intervals on the app.

QR CodeQR Code
Displays the QR code for the FunDo Health app.

Shortcut Menu

Swipe down from the home screen to access the shortcut menu.

  1. Do not disturb mode – tap to turn do not disturb mode on/off. You can set the duration for an hour or up to the next day’s morning (if set after 7 pm) or night (if set after 7 am). The watch will display “Tomorrow morning” or “Open till night” respectively.
  2. Find Phone – tap to find your smartphone after connecting to the Fundo Health app.
  3. About – display the product name, hardware address and software version.
  4. Brightness – tap to adjust the screen brightness settings.
  5. Alarm – tap to enter the alarm settings menu.

Change The Straps

Turn the watch over (see below), push the top needle knob to the right to take off the original strap, and then fit the new strap.

Note: only one strap is included with this product.

Specifications

Display| 1.3”, 240 x 240

pixels

---|---
Ingress protection| IP67
Charging time| 3.5 hrs (approx.)
Charging base input| 5VDC, 200mA
Bluetooth Range| < 10m
Built-In Battery| Li-ion 3.7V 360mAh
Weight| 60g
Dimensions (mm)| 48.8(W) x 57(H) x 15.8(D)

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,Inc. and any use of such marks by Hands (IP) Holdings Pty Ltd is under license. Other trademarks and trade names are those of their respective owners.

Warranty Information

The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion, solely at our option with no charge for parts and labour. The benefits conferred by this warranty are in addition to all rights and remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and similar state and territory laws.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Warranty returns
Should you for any reason need to return this product for a warranty claim, make sure to include all accessories with the product.

The product does not work?
If you encounter problems with this product, or if it fails to perform to your expectations, make sure to contact our After Sales Support Centre on 1300 002 534 before returning it to the store for a refund.

Repair and Refurbished Goods or Parts Notice

Unfortunately, sometimes faulty products are manufactured, which need to be returned to the supplier for repair. Please be aware that if your product is capable of retaining user-generated data (such as files stored on a computer hard drive, telephone numbers stored on a mobile telephone, songs stored on a portable media player, games saved on a games console or files stored on a USB memory stick) during the process of repair, some or all of your stored data may be lost. We recommend you save this data elsewhere prior to sending the product for repair. You should also be aware that rather than repairing goods, we may replace them with refurbished goods of the same type or use refurbished parts in the repair process.

Please be assured though, that refurbished parts or replacements are only used where they meet ALDI’s stringent quality specifications. If at any time you feel your repair is being handled unsatisfactorily, you may escalate your complaint. Please telephone us on 1300 002 534 or write to us at: Tempo (Aust) Pty Ltd ABN 70 106 100 252 PO Box 6056, Frenchs Forest, NSW 2086, Australia Telephone: 1300 002 534 (Aust) – Fax: (02) 9975 2688 Tempo Help Desk: 1300 002 534 (Aust) (Operating Hours: Mon-Fri 8:30am-6pm; Sat 9am-6pm EST) Email: tempo.org/support.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

BAUHN User Manuals

Related Manuals