FRAL FSC25 Portable air conditioner User Manual
- June 5, 2024
- FRAL
Table of Contents
FRAL FSC25 Portable air conditioner
USE AND MAINTENANCE
DESCRIPTION OF THE MACHINE
This machine is a particular air conditioner, mono-block. Cold air is sucked trough the front grille, and supplied rough the two holes located in the front panel. On this wo holes can be put two flexible pipes for creating a Spot cooled area. Hot air is sucked from the back filter and the outlet is on the top. On the neck of the hot air supply can be placed a fixable pipe for bringing far away the hot air. n the front of the machine, under the fowl holes for cold air supply, there is the control panel as described Fellow. he machine include a 20 liter capacity tank for collecting condensed water. When the tank is full the machine stop.
FUNCTIONING AND CONTROL PANELS
The compressor uses R407c Refrigerant and directly cools the air. The machine includes: one compressor, a thermostatic automatic valve, two motor fans, an automatic functioning thermostat, a defrosting thermostat, a OW pressure switch, an nigh pressure switch, a PCB, and a plug with fuse
FRONT CONTROL PANEL includes:
An Ambient Temperature Thermostat, located in the front control panel allows to choose the desired room temperature with range 10-35 C.
- A Fan speed Switch, also located in the front control panel, allows to choose among 2 different internal fan speeds.
- A Main Switch allows to choose among: OFF position (0 nothing works)- AUT position (the machine is cooling according with preset room temperature) – cont. position (the machine works not depending on thermostat).