mtn EAX1805 WiFi 6 Range Extender User Manual
- June 5, 2024
- mtn
Table of Contents
User manual
WiFi 6 Range Extender — EAX1805
Configuration wizard
1.1 Setup Wizard Page
Connect to WiFi and log in to the app, automatically jump to the configuration
wizard page NO password in default ）
Note: The device needs to be restored to the factory
1.2 Select extended WiFi
Please choose to relay WiFi
1.3 Enter the password to relay WiFi
Click Confirm, repeater needs to be connected to the root router to verify the password
1.4 WiFi Settings
Configure your extended WiFi network.
Note: The sync WiFi switch is turned on by default, and you can customize
WiFi Settings after you turn it off
1.5 Device Admin Password
Note: Synchronize administrator password switch is turned on by default.
You can customize the administrator password after turning it off
1.6 Summary
Check the information, and then click “Finish” to save the configuration.
Login
2.1 Login APP
After completing the configuration wizard, please reconnect to the WiFi and
log in to the app again.
Admin Password： The Device administrator Password you set on Wizard Page.
Home Page
Home page information is displayed below, including signal strength, internet
connection status, device information, and a logout button.
3.1 device Information Display Page
Home>>Info
It shows basic information about the router, including device name, FW
version, and hardware version of the router.
3.2 Logout Button
Home>>Logout
Click “Logout” to exit the current login and jump to the login page.
Device Page
4.1 Connected Clients List
It shows all Connected Client’s information, including device name, mac
address,IP address, and connection method.
4.2 Device details Page
Device>>Device details page
The device details page shows details information about the connected device.
You can set the remark of the connected device.
Click the “add to blacklist” button to add the device to the blacklist.
Device >>Blacklist
The blacklist page shows all the devices added to the blacklist.
Once the device is added to the blacklist, it can connect to wifi, but cannot
access the internet.
Click “Remove blacklist” to remove the device from the blacklist.
Basic Configuration
5.1 Administrator Password Settings
Basic Configuration>>Administrator Password
To set the administrator password, you need to enter the original password for
verification, then enter a new administrator password and verify it again.
After modifying the administrator password, the app will automatically jump to
the login page.
Enter the administrator password to log in.
5.2 Root Router Connection
Basic Configuration >>Root Router Connection
You can view the current root router on this page, or click Scan to select the
network to be relayed.
5.3 WIFI Settings
Basic Configuration >>WIFI Settings
Use this section to configure the wireless settings for your repeater.
5.3.1 Advanced Setup
Configure the 2.4G or 5G WIFI SSID, password, and security.
5.3.2 Smart Connect
When the Smart Connect feature is on, your wireless device can only find one
wireless SSID of the router, and it will automatically match the 2.4G or 5G
band WIFI according to the connection signal strength.
After the smart connection is closed, the 2.4G WIFI and the 5G WIFI can be searched on the terminal wireless device respectively, and there are two wireless bands to be displayed on the page.
Advanced Configuration
6.1 WiFi Advanced Settings
Advanced Configuration>>WiFi Advanced Settings
You can configure 2.4G and 5G wifi advanced configuration by this section,
such as SSID Broadcast and security mode.
6.2 Online Upgrade
Advanced Configuration >>Online Upgrade
This page will display your current firmware version. Click on the ‘Check for
New Firmware’ button for detecting the latest firmware version. I have, you
can upgrade your
firmware to the latest version. Otherwise, the page will prompt that the
firmware is the latest version.
System Settings
7.1 FAQ
FAQ list shows the Frequently Asked Questions.
7.2 About Us
This section shows the app version, website, and technology support.
7.3 Cache clear
Click “Clear cache” to clear the cache of the app.
Frequently Asked Questions:
Why the connected node can not be managed:
- Please confirm that the mobile wifi is connected to the SSID of the device to be managed
How to restore the router to factory settings:
- When the power is on, sting the repeater’s “Reset” pinhole for 10 seconds to restore the factory settings.
How to manage the node by using a PC / laptop:
- Step 1. Connect the PC / Laptop to the mesh repeater’s Wi-Fi or LAN port via ethernet cable.
- Step 2. Launch an Internet Browser(Chrome, Safari,etc.)and enter the repeater’s domain name or IP Address. The default login information is available at the product label.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with
a minimum distance of 20cm between the radiator & your body.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: 1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
‐Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
The device is restricted to indoor use only when operating in the 5150 to 5250
MHz frequency range.